kSIST FprEN 4733-003:2024
(Main)Aerospace series - Rectangular optical connector, modular - Operating temperature 125 °C, for EN 4734 10X: MT contacts - Part 003: Module double MT contacts, series 2 - Product standard
Aerospace series - Rectangular optical connector, modular - Operating temperature 125 °C, for EN 4734 10X: MT contacts - Part 003: Module double MT contacts, series 2 - Product standard
This document specifies the characteristics of module double contacts MT for EN 4734 10X optical MT contact, in the family of rectangular, modular, connector EN 4165.
Luft- und Raumfahrt - Optischer Rechtecksteckverbinder in modularer Bauweise, Betriebstemperatur 125 °C, für EN XXXX-10x-MT-Kontakte - Teil 003: Modul-Doppel-MT-Kontakte, Serie 2 - Produktnorm
Série aérospatiale - Connecteur optique rectangulaire, modulaire - Température d'utilisation 125 °C, pour EN 4734-10X : contacts MT - Partie 003 : Module à doubles contacts MT, série 2 - Norme de produit
Le présent document spécifie les caractéristiques d’un module à doubles contacts MT pour les contacts optiques MT EN 4734-10X, utilisés dans la famille des connecteurs rectangulaires modulaires EN 4165.
Aeronavtika - Pravokotni optični konektor, modularni - Delovna temperatura 125 °C, za EN 4734 10X: MT kontakti - 003. del: Modul z dvojnimi MT kontakti, serija 2 - Standard izdelka
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4733-003:2024
01-maj-2024
Aeronavtika - Pravokotni optični konektor, modularni - Delovna temperatura 125
°C, za EN 4734 10X: MT kontakti - 003. del: Modul z dvojnimi MT kontakti, serija 2 -
Standard izdelka
Aerospace series - Rectangular optical connector, modular - Operating temperature 125
°C, for EN 4734 10X: MT contacts - Part 003: Module double MT contacts, series 2 -
Product standard
Luft- und Raumfahrt - Optischer Rechtecksteckverbinder in modularer Bauweise,
Betriebstemperatur 125 °C, für EN XXXX-10x-MT-Kontakte - Teil 003: Modul-Doppel-
MT-Kontakte, Serie 2 - Produktnorm
Série aérospatiale - Connecteur optique rectangulaire, modulaire - Température
d'utilisation 125 °C, pour EN 4734-10X : contacts MT - Partie 003 : Module à doubles
contacts MT, série 2 - Norme de produit
Ta slovenski standard je istoveten z: prEN 4733-003
ICS:
49.090 Oprema in instrumenti v On-board equipment and
zračnih in vesoljskih plovilih instruments
oSIST prEN 4733-003:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 4733-003:2024
oSIST prEN 4733-003:2024
DRAFT
EUROPEAN STANDARD
prEN 4733-003
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2023
ICS 49.090
English Version
Aerospace series - Rectangular optical connector, modular
- Operating temperature 125 °C, for EN 4734 10X: MT
contacts - Part 003: Module double MT contacts, series 2 -
Product standard
Luft- und Raumfahrt - Optischer
Rechtecksteckverbinder in modularer Bauweise,
Betriebstemperatur 125 °C, für EN XXXX-10x-MT-
Kontakte - Teil 003: Modul-Doppel-MT-Kontakte, Serie
2 - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4733-003:2023 E
worldwide for CEN national Members.
oSIST prEN 4733-003:2024
prEN 4733-003:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Dimensions and masses . 5
4.2 Material and surface treatment . 8
4.3 Optical, mechanical and climatic characteristics . 8
5 Designation . 9
6 Marking . 9
7 Technical specification . 9
oSIST prEN 4733-003:2024
prEN 4733-003:2023 (E)
European foreword
This document (prEN 4733-003:2023) has been prepared by the Aerospace and Defence Industries
Association o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.