iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61207-1:1998

(Main)

Expression of performance of gas analyzers -- Part 1: General

Expression of performance of gas analyzers -- Part 1: General

Applies to gas analyzers used for the determination of certain constituents in gaseous mixtures. Specifies general aspects of terminology and definitions related to the performance. Unifies methods for making and verifying statements on functional performance. Specifies tests to determine functional performance.

Angabe zum Betriebsverhalten von Gasanalysatoren -- Teil 1: Allgemeines

Expression des qualités de fonctionnement des analyseurs de gaz -- Partie 1: Généralités

S'applique aux analyseurs de gaz utilisés pour la détermination de certains constituants des mélanges gazeux. Spécifie les aspects généraux en matière de terminologie et définitions relatifs aux qualités de fonctionnement. Unifie les méthodes pour fournir et vérifier les indications relatives au fonctionnement. Spécifie les essais à effectuer afin de déterminer la qualité fonctionnelle.

Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:1994)

General Information

Status
Withdrawn
Publication Date
31-Oct-1998
Withdrawal Date
31-Aug-2010
ICS
71.040.40 - Chemical analysis
Technical Committee
MOV - Measuring equipment for electromagnetic quantities
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
31-Aug-2010
Due Date
23-Sep-2010
Completion Date
01-Sep-2010
Ref Project
EN 61207-1:1994 - Expression of performance of gas analyzers - Part 1: General

Relations

Revised
SIST EN 61207-1:2010 - Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:2010)
Effective Date
02-Jul-2013
Replaced By
SIST EN 61207-1:2010 - Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:2010)
Effective Date
07-Jun-2022
Replaced By
SIST EN 61207-1:2010 - Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:2010)
Effective Date
01-Oct-2010
Replaced By
SIST EN 61207-1:2010 - Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:2010)
Effective Date
28-Jan-2023

Buy Standard

EN 61207-1:1998EN 61207-1:1998
PreviousNext
Standard
EN 61207-1:1998
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61207-1:1998
01-november-1998
Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:1994)
Expression of performance of gas analyzers -- Part 1: General
Angabe zum Betriebsverhalten von Gasanalysatoren -- Teil 1: Allgemeines
Expression des qualités de fonctionnement des analyseurs de gaz -- Partie 1:
Généralités
Ta slovenski standard je istoveten z: EN 61207-1:1994
ICS:
71.040.40 Kemijska analiza Chemical analysis
SIST EN 61207-1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61207-1:1998

---------------------- Page: 2 ----------------------

SIST EN 61207-1:1998

---------------------- Page: 3 ----------------------

SIST EN 61207-1:1998

---------------------- Page: 4 ----------------------

SIST EN 61207-1:1998

---------------------- Page: 5 ----------------------

SIST EN 61207-1:1998

---------------------- Page: 6 ----------------------

SIST EN 61207-1:1998

---------------------- Page: 7 ----------------------

SIST EN 61207-1:1998

---------------------- Page: 8 ----------------------

SIST EN 61207-1:1998

---------------------- Page: 9 ----------------------

SIST EN 61207-1:1998

---------------------- Page: 10 ----------------------

SIST EN 61207-1:1998

-------------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 61207-3:2019(Main)
Gas Analyzers - Expression of performance - Part 3: Paramagnetic oxygen analysers (IEC 61207-3:2019)
EN IEC 61207-3:2019

This document applies to the three main methods for measuring oxygen by its paramagnetic property, which are outlined in the introduction. It considers essential ancillary units and applies to analyzers installed indoors and outdoors. Safety-critical applications can require additional requirements from system and analyzer specifications not covered in this document. This document is intended - to specify terminology and definitions related to the functional performance of paramagnetic gas analyzers for the measurement of oxygen in a source gas; - to unify methods used in making and verifying statements on the functional performance of such analyzers; - to specify what tests are performed to determine the functional performance and how such tests are carried out; - to provide basic documents to support the application of internationally recognized quality management standards.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61207-2:2019(Main)
Expression of performance of gas analyzers - Part 2: Measuring oxygen in gas utilizing high-temperature electrochemical sensors (IEC 61207-2:2019)
EN IEC 61207-2:2019

Applies to gas analyzers using high temperature electrochemical sensors for measurement of oxygen in gas. Applies to both 'in situ' and extractive analyzers installed indoors or outdoors.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61207-7:2014/AC:2015(Corrigendum)
Expression of performance of gas analyzers - Part 7: Tunable semiconductor laser gas analyzer
EN 61207-7:2013/AC:2015
  • Corrigendum
    1 page
    English and French language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61207-6:2015(Main)
Expression of Performance of gas analyzers- Part 6: Photometric analyzers (IEC 61207-6:2014)
EN 61207-6:2015

This part of IEC 61207 applies to all aspects of analyzers using photometric techniques for the measurement of concentration of one or more components in a mixture of gases or vapors. It should be used in conjunction with IEC 61207-1.
For photometric analyzers utilizing tuneable semiconductor laser absorption spectroscopy (TSLAS) for gas measurements, IEC 61207-7 should also be referred to.
This part of IEC 61207 applies to analyzers using non-dispersive and dispersive wavelength selection and using absorption, emission, wavelength derivative or scattering techniques. It applies to analyzers which receive either a conditioned or unconditioned sample of gas either under vacuum, at ambient pressure or pressurized.
It applies to analyzers which measure gas concentrations directly within the sample gas.
The object of this part is:
– to specify the terminology and definitions related to the functional performance of gas analyzers, utilizing a photometric analyzer, for the continuous measurement of gas or vapor concentration in a source gas;
– to unify methods used in making and verifying statements on the functional performance of such analyzers;
– to specify what tests should be performed to determine the functional performance and how such tests should be carried out;
– to provide basic documents to support the application of standards of quality assurance ISO 9001

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61207-7:2014(Main)
Expression of performance of gas analyzers - Part 7: Tunable semiconductor laser gas analyzers (utilizing tunable semiconductor laser absorption spectroscopy)
EN 61207-7:2013

This part of IEC 61207 applies to all aspects of analyzers utilizing TSLAS for the concentration measurement of one or more gas components in a gaseous mixture or vapour. It applies to analyzers utilizing tuneable semiconductor lasers as sources and utilizing absorption spectroscopy, such as direct absorption, FMS, WMS, multi-pass absorption spectroscopy, CRDS, ICOS, PAS and CEAS techniques, etc. It applies both to in situ or extractive type analyzers. This standard includes the following, it - specifies the terms and definitions related to the functional performance of gas analyzers, utilizing tuneable semiconductor laser gas absorption spectroscopy, for the continuous measurement of gas or vapour concentration in a source gas, - unifies methods used in making and verifying statements on the functional performance of this type of analyzers, - specifies the type of tests to be performed to determine the functional performance and how to carry out these tests, - provides basic documents to support the application of the standards of quality assurance with in ISO 9001

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61207-1:2010(Main)
Expression of performance of gas analyzers - Part 1: General (IEC 61207-1:2010)
EN 61207-1:2010

This part of IEC 61207 is applicable to gas analyzers used for the determination of certain constituents in gaseous mixtures. This part of IEC 61207 specifies the terminology, definitions, requirements for statements by manufacturers and tests that are common to all gas analyzers. Other international standards in this series, for example IEC 61207-2, describe those aspects that are specific to certain types (utilizing high-temperature electrochemical sensors). This part IEC 61207 is in accordance with the general principles set out in IEC 60359 and IEC 60770. This standard is applicable to analyzers specified for permanent installation in any location (indoors or outdoors) and to such analyzers utilizing either a sample handling system or an in situ measurement technique. This standard is applicable to the complete analyzer when supplied by one manufacturer as an integral unit, comprised of all mechanical, electrical and electronic portions. It also applies to sensor units alone and electronic units alone when supplied separately or by different manufacturers. For the purposes of this standard, any regulator for mains-supplied power or any non-mains power supply, provided with the analyzer or specified by the manufacturer, is considered part of the analyzer whether it is integral with the analyzer or housed separately. Safety requirements are dealt with in IEC 61010-1. If one or more components in the sample is flammable, and air or another gas mixture containing oxygen or other oxidizing component is present, then the concentration range of the reactive components are limited to levels which are not within flammability limits. Standard range of analogue d.c. current and pneumatic signals used in process control systems are dealt with in IEC 60381-1 and IEC 60382. Specifications for values for the testing of influence quantities can be found in IEC 60654. Requirements for documentation to be supplied with instruments are dealt with in IEC 61187. Requirements for general principles concerning quantities, units and symbols are dealt with in ISO 1000. See also ISO 31-0. This part of IEC 61207 does not apply to: - accessories such as recorders, analogue-to-digital converters or data acquisition systems used in conjunction with the analyzer, except that when two or more such analyzers are combined and sold as a subsystem and a single electronic unit is supplied to provide continuous measurement of several properties, that read-out unit is considered to be part of the analyzer. Similarly, e.m.f-to-current or e.m.f-to-pressure converters which are an integral part of the analyzer are included. The object of this part of IEC 61207 is: - to specify the general aspects in the terminology and definitions related to the performance of gas analyzers used for the continuous measurement of gas composition; - to unify methods used in making and verifying statements on the functional performance of such analyzers; - to specify which tests should be performed in order to determine the functional performance and how such tests should be carried out; - to provide basic documents to support the application of standards of quality assurance within ISO 9001.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50436-1:2023(Main)
Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments having a mouthpiece and measuring breath alcohol for drink-driving-offender programs and general preventive use
EN 50436-1:2023

This document specifies test methods and performance requirements for alcohol interlocks having a mouthpiece. It covers alcohol interlocks to be used in all general preventive programmes and those for drink driving offenders and legally regulated programmes monitored or controlled in a comparable way.
This document can also be used for alcohol interlocks intended for other applications.
This document is directed at test laboratories and manufacturers of alcohol interlocks. It defines requirements and test procedures for type testing.
Several parameters (such as alcohol concentration or breath volume) are specified in this document for the purpose of type testing according to this document only. However, it can be necessary due to national regulations or depending on user requests to set the values of the prescribed parameters differently when the alcohol interlocks are in use.
This document also applies to alcohol interlocks integrated into other control systems of the vehicle as well as to accessory devices connected to the alcohol interlock.
This document does not apply to
—   instruments measuring the alcohol concentration in the ambient air in the vehicle,
—   alcohol interlocks not having a mouthpiece,
—   methods of installation and connections to the vehicle.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1833-22:2021(Main)
Textiles - Quantitative chemical analysis - Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell with flax fibres (method using formic acid and zinc chloride) (ISO 1833 22:2020)
EN ISO 1833-22:2021

This document specifies a method, using formic acid and zinc chloride, to determine the mass
percentage of viscose or certain types of cupro or modal or lyocell, after removal of non-fibrous matter,
in textiles made of mixtures of
— viscose or certain types of the cupro or modal or lyocell fibres
with
— flax fibres.
This document is not applicable to mixtures in which the flax fibre has suffered extensive chemical
degradation, nor when the viscose, cupro, modal or lyocell fibre is rendered incompletely soluble by the
presence of certain permanent finishes or reactive dyes that cannot be removed completely.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1833-3:2021(Main)
Textiles - Quantitative chemical analysis - Part 3: Mixtures of acetate with certain other fibres (method using acetone) (ISO 1833-3:2020)
EN ISO 1833-3:2020

This document specifies a method, using acetone, to determine the mass percentage of acetate, after
removal of non-fibrous matter, in textiles made of mixtures of
— acetate
with
— wool, animal hair, silk, protein, cotton (scoured, kiered, or bleached), flax (or linen), hemp, jute, abaca,
alfa, coir, broom, ramie, sisal, cupro, viscose, modal, polyamide, polyester, polypropylene, acrylic,
elastolefin, elastomultiester, melamine, polypropylene/polyamide bicomponent, polyacrylate and
glass fibres.
It is not applicable to mixtures containing modacrylic fibres, certain chlorofibres, nor to mixtures
containing acetate fibres that have been deacetylated on the surface.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 1833-26:2020(Main)
Textiles - Quantitative chemical analysis - Part 26: Mixtures of melamine with certain other fibres (method using hot formic acid) (ISO 1833-26:2020)
EN ISO 1833-26:2020

This document specifies a method using hot formic acid to determine the mass percentage of melamine
fibres after removal of non-fibrous matter, in textiles made of mixtures of:
— melamine fibres
with
— cotton, polypropylene or aramid fibres.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    German language
    sale 10% off
    e-Library read for
    1 day