SIST EN 3155-004:2009

Aerospace series - Electrical contacts used in elements of connection - Part 004: Contacts, electrical, male, type A, crimp, class T - Product standard

This standard specifies the required characteristics, tests and tooling applicable to male electrical con-tacts 004, type A, crimp, class T, used in elements of connection according to EN 3155 002.
It shall be used together with EN 3155 001.
The associated female contacts are defined in EN 3155 005.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 004: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse T - Produktnorm

Diese Norm legt die Anforderungen, Prüfungen und Werkzeuge für elektrische Stiftkontakte 004, Typ A, crimpbar, Klasse T, zur Verwendung in Verbindungselementen nach EN 3155 002 fest.
Sie ist in Verbindung mit EN 3155 001 anzuwenden.
Die zugehörigen Buchsenkontakte sind in EN 3155 005 festgelegt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 004 : Contacts électriques, mâles, type A, à sertir, classe T - Norme de produit

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 004. del: Kontakti, električni, moški, tip A, nagubani, razred T - Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 20-Nov-2008
• Withdrawal Date: 04-Apr-2019
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 05-Apr-2019
• Due Date: 28-Apr-2019
• Completion Date: 05-Apr-2019
• Ref Project: EN 3155-004:2007 - Aerospace series - Electrical contacts used in elements of connection - Part 004: Contacts, electrical, male, type A, crimp, class T - Product standard

Relations

• Replaced By: SIST EN 3155-004:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 004: Contacts, electrical, male, type A, crimp, class T - Product standard
• Effective Date: 03-Apr-2019
• Revised: SIST EN 3155-004:2019 - Aerospace series - Electrical contacts used in elements of connection - Part 004: Contacts, electrical, male, type A, crimp, class T - Product standard
• Effective Date: 04-Feb-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3155-004:2009
01-januar-2009
$HURQDYWLND(OHNWULþQLNRQWDNWL]DXSRUDERYYH]QLKHOHPHQWLKGHO
.RQWDNWLHOHNWULþQLPRãNLWLS$QDJXEDQLUD]UHG76WDQGDUG]DSURL]YRG
Aerospace series - Electrical contacts used in elements of connection - Part 004:
Contacts, electrical, male, type A, crimp, class T - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 004: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse T - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
004 : Contacts électriques, mâles, type A, à sertir, classe T - Norme de produit
Ta slovenski standard je istoveten z: EN 3155-004:2007
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 3155-004:2009 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3155-004:2009

---------------------- Page: 2 ----------------------

SIST EN 3155-004:2009
EUROPEAN STANDARD
EN 3155-004
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2007
ICS 49.060

English Version
Aerospace series - Electrical contacts used in elements of
connection - Part 004: Contacts, electrical, male, type A, crimp,
class T - Product standard
Série aérospatiale - Contacts électriques utilisés dans les Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung
organes de connexion - Partie 004 : Contacts électriques, in Verbindungselementen - Teil 004: Elektrische
mâles, type A, à sertir, classe T - Norme de produit Stiftkontakte, Typ A, crimpbar, Klasse T - Produktnorm
This European Standard was approved by CEN on 6 January 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3155-004:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3155-004:2009
EN 3155-004:2007 (E)
Contents Page
Foreword.3
0 Introduction.4
1 Scope .4
2 Normative references .4
3 Definitions .5
4 Required characteristics.5
4.1 Specific characteristics.5
4.2 Dimensions and mass.5
4.3 Marking by colour code .6
4.4 Material, surface treatment.7
4.5 Permissible cables.7
4.6 Tooling.7
4.6.1 Crimping tools.7
4.6.2 Insertion/extraction tools.8
4.7 Cable stripping.9
4.8 Tests.9
4.9 Gauges.10
5 Designation .10
6 Marking .10
7 Technical specification .10

2

---------------------- Page: 4 ----------------------

SIST EN 3155-004:2009
EN 3155-004:2007 (E)
Foreword
This document (EN 3155-004:2007) has been prepared by the AeroSpace and Defense Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has re-
ceived the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2007, and conflicting national standards shall be with-
drawn at the latest by September 2007.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Repub-
lic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN 3155-004:2009
EN 3155-004:2007 (E)
0 Introduction
The contacts defined by this standard are derived from those of MIL-C-39029/4 and, intermateable with those
of MIL-C-39029/5. They are specified as a 260 °C class instead of a 200 °C class as detailed in the MIL stan-
dard.
1 Scope
This standard specifies the required characteristics, tests and tooling applicable to male electrical con-
tacts 004, type A, crimp, class T, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-005.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated refer-
ences, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 8843, Aircraft — Crimp-removable contacts for electrical connectors — Identification system
EN 2083; Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard
EN 2591 (series), Aerospace series — Elements of electrical and optical connection — Test methods
EN 3155-001, Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical
specification
...