SIST EN 3745-602:2008
(Main)Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: Toxicity
This test method is intended for use in determining the concentration of specific gas components of smoke released by cable insulation materials.
It shall be used together with EN 3745-100.
Luft- und Raumfahrt — Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 602: Giftigkeit
Série aérospatiale — Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 602 : Toxicité
Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 602. del: Toksičnost
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 602: ToxicitySérie aérospatiale — Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 602 : ToxicitéLuft- und Raumfahrt — Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 602: Giftigkeit49.060Aerospace electric equipment and systemsICS:SIST EN 3745-602:2008enTa slovenski standard je istoveten z:EN 3745-602:200801-julij-2008SIST EN 3745-602:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3745-602April 2008ICS 49.060 English VersionAerospace series - Fibres and cables, optical, aircraft use - Testmethods - Part 602: ToxicitySérie aérospatiale - Fibres et câbles optiques à usageaéronautique - Méthodes d'essais - Partie 602 : ToxicitéLuft- und Raumfahrt - Faseroptische Leitungen fürLuftfahrzeuge - Prüfverfahren - Teil 602: GiftigkeitThis European Standard was approved by CEN on 23 June 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3745-602:2008: E
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.