iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN IEC 61757-4-3:2020/AC:2022

(Corrigendum)

Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method (IEC 61757-4-3:2020/COR1:2022)

Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method (IEC 61757-4-3:2020/COR1:2022)

IEC Corrected version

Lichtwellenleitersensoren - Teil 4-3: Strommessung - Polarimetrisches Verfahren (IEC 61757-4-3:2020/COR1:2022)

Capteurs fibroniques - Partie 4-3: Mesure du courant électrique - Méthode polarimétrique (IEC 61757-4-3:2020/COR1:2022)

Optični senzorji - 4-3. del: Merjenje električnega toka - Polarimetrijska metoda - Popravek AC (IEC 61757-4-3:2020/COR1:2022)

Popravek k standardu SIST EN IEC 61757-4-3:2020.
Ta del standarda IEC 61757 določa terminologijo, strukturo in metodo za preskušanje lastnosti optičnega tokovnega senzorja z uporabo polarimetrijske metode. Obravnava samo element za zaznavanje toka in ne dodatnih naprav, ki so edinstvene za posamezno vrsto uporabe. Splošne specifikacije za optične senzorje so določene v standardu IEC 61757.
Specifikacije optičnih polarimetrijskih tokovnih senzorjev, potrebne za posameznega uporabnika, se razlikujejo glede na vrsto uporabe, zato ta dokument ne opredeljuje zahtevanih vrednosti zmogljivosti.
Zahtevane vrednosti zmogljivosti se opredelijo pri načrtovanju senzorja v skladu s specifično vrsto uporabe.

General Information

Status
Published
Publication Date
04-Sep-2022
ICS
33.180.99 - Other fibre optic equipment
Technical Committee
MOC - Mobile Communications
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
27-Jul-2022
Due Date
01-Oct-2022
Completion Date
05-Sep-2022
Ref Project
EN IEC 61757-4-3:2020/AC:2022-07 - Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method

Relations

Corrects
SIST EN IEC 61757-4-3:2020 - Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method (IEC 61757-4-3:2020)
Effective Date
28-Jun-2022

Buy Standard

EN IEC 61757-4-3:2020/AC:2022EN IEC 61757-4-3:2020/AC:2022
PreviousNext
Corrigendum
EN IEC 61757-4-3:2020/AC:2022
English and French language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61757-4-3:2020/AC:2022
01-oktober-2022
Optični senzorji - 4-3. del: Merjenje električnega toka - Polarimetrijska metoda -
Popravek AC (IEC 61757-4-3:2020/COR1:2022)
Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method (IEC
61757-4-3:2020/COR1:2022)
Lichtwellenleitersensoren - Teil 4-3: Strommessung - Polarimetrisches Verfahren (IEC
61757-4-3:2020/COR1:2022)
Capteurs fibroniques - Partie 4-3: Mesure du courant électrique - Méthode polarimétrique
(IEC 61757-4-3:2020/COR1:2022)
Ta slovenski standard je istoveten z: EN IEC 61757-4-3:2020/AC:2022-07
ICS:
33.180.99 Druga oprema za optična Other fibre optic equipment
vlakna
SIST EN IEC 61757-4-3:2020/AC:2022 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61757-4-3:2020/AC:2022

---------------------- Page: 2 ----------------------
SIST EN IEC 61757-4-3:2020/AC:2022


EUROPEAN STANDARD EN IEC 61757-4-
3:2020/AC:2022-07
NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2022

ICS 33.180.99
English Version
Fibre optic sensors - Part 4-3: Electric current measurement -
Polarimetric method
(IEC 61757-4-3:2020/COR1:2022)
Capteurs fibroniques - Partie 4-3: Mesure du courant Lichtwellenleitersensoren - Teil 4-3: Strommessung -
électrique - Méthode polarimétrique Polarimetrisches Verfahren
(IEC 61757-4-3:2020/COR1:2022) (IEC 61757-4-3:2020/COR1:2022)
This corrigendum becomes effective on 8 July 2022 for incorporation in the English language version of the EN.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61757-4-3:2020/AC:2022-07 E

---------------------- Page: 3 ----------------------
SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 62343:2023(Main)
Dynamic modules - Generic specification (IEC 62343:2023)
EN IEC 62343:2023

IEC 62343:2023 is available as  which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62343:2023 applies to all commercially available optical dynamic modules and devices. It describes the products covered by the IEC 62343 series, defines terminology, fundamental considerations and basic approaches. The object of this document is to:
- establish uniform requirements for operation, reliability and environmental properties of dynamic modules (DMs) to be implemented in the appropriate DM standard, and
- provide assistance to the purchaser in the selection of consistently high-quality DM products for their particular applications, as well as in the consultation of the appropriate specific DM standard(s).
This document covers performance templates, performance standards, reliability qualification requirements, hardware and software interfaces and related testing methods. Since a dynamic module integrates an optical module/device, printed wiring board, and software/firmware, the standards developed in the series will mimic appropriate existing standards. On the other hand, since "dynamic module" is a relatively new product category, the dynamic module standards series will not be bound by the existing practices where requirements differ.The safety standards as related to dynamic modules are mostly optical power considerations, which is covered by the IEC 60825 series (see Clause 6). This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
- addition of terms and definitions for optical multicast switches (3.8);
- revision of Clause 4, listing the requirements for standards in the IEC 62343 series;
- addition of Clause 6 (Safety requirements).

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61757-3-2:2022(Main)
Fibre optic sensors - Part 3-2: Acoustic sensing and vibration measurement - Distributed sensing (IEC 61757-3-2:2022)
EN IEC 61757-3-2:2022

This part of IEC 61757 specifies the terminology, characteristic performance parameters,
related test and calculation methods, as well as specific test equipment for interrogation units
used in distributed fibre optic acoustic sensing and vibration measurement systems. This
document refers to the Rayleigh backscatter and phase detection method by phase-sensitive
coherent optical time-domain reflectometry (ϕ-OTDR) only. Quasi-static and low frequency
operation modes are not covered by this document.
Generic specifications for fibre optic sensors are defined in IEC 61757.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CLC/TR 50510:2021(Main)
Fibre optic access to end-user - A guideline to building of FTTX fibre optic network
CLC/TR 50510:2021

The purpose of this report is to be a guideline for those considering to install a high bandwidth (high bit-rate) FttX-network. After studying the report, operators, communities, energy companies, installers and others will understand the necessary steps to take to plan and install networks with high quality and cost effectiveness, and to secure a uniform structure and a high quality level on such networks.

  • Technical report
    102 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61757-2-1:2021(Main)
Fibre Optic Sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings (IEC 61757-2-1:2021)
EN IEC 61757-2-1:2021

This part of IEC 61757 specifies the terminology, characteristic performance parameters and
related test methods of optical temperature sensors based on fibre Bragg gratings (FBG) that
carry out temperature measurements in the temperature range between –260 °C and 600 °C.
Generic specifications for fibre optic sensors are defined in IEC 61757.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61757-5-1:2021(Main)
Fibre optic sensors - Part 5-1: Tilt measurement - Tilt sensors based on fibre Bragg gratings (IEC 61757-5-1:2021)
EN IEC 61757-5-1:2021

This part of IEC 61757 defines the terminology, structure, characteristics and their
measurement method including the procedures, for an optical tilt sensor based on fibre Bragg
gratings (FBGs) as the sensitive element.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60794-1-31:2021(Main)
Optical fibre cables - Part 1-31: Generic specification - Optical cable elements - Optical fibre ribbon (IEC 60794-1-31:2021)
EN IEC 60794-1-31:2021

This part of IEC 60794, which is a generic specification, covers optical fibre ribbons. Requirements which are described in this part apply to optical fibre ribbon cables for use with telecommunication equipment and devices employing similar techniques, in particular optical fibre cables in IEC 60794-2 for indoor use, in IEC 60794-3 for outdoor use, in IEC 60794-4 for self-supporting overhead use, in IEC 60794-5 for air blown use and in IEC 60794-6 for indoor/outdoor use. The detailed specification can be verified in specifications for each application such as IEC 60794-2 and IEC 60794-3.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61757-4-3:2020(Main)
Fibre optic sensors - Part 4-3: Electric current measurement - Polarimetric method (IEC 61757-4-3:2020)
EN IEC 61757-4-3:2020

This part of IEC 61757 defines terminology, structure, and a characteristic test method of an
optical current sensor using the polarimetric method. It addresses the current sensing element
only and not the additional devices that are unique to each application. Generic specifications
for fibre optic sensors are defined in IEC 61757.
As the specifications of optical polarimetric fibre current sensors required by each user vary
depending on the application, this document does not define the required performance values.
The required performance values are defined when designing a sensor according to the specific
application.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61757-1-1:2020(Main)
Fibre optic sensors - Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings (IEC 61757-1-1:2020)
EN IEC 61757-1-1:2020

IEC 61757-1-1 defines detail specifications for fibre optic sensors using one or morefibre Bragg gratings (FBG) as the sensitive element for strain measurements. Genericspecifications for fibre optic sensors are defined in IEC 61757.This document specifies the most important features and characteristics of a fibre optic sensorfor strain measurements, based on use of an FBG as the sensitive element, and defines theprocedures for their determination. Furthermore, it specifies basic performance parameters andcharacteristics of the corresponding measuring instrument to read out the optical signal fromthe FBG. This document refers to the measurement of static and dynamic strain values in arange of frequencies.A blank detail specification is provided in Annex B.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61757-1:2018(Main)
Fibre optic sensors - Part 1: Generic specification (IEC 61757:2018)
EN IEC 61757:2018

This document is a generic specification covering optical fibres, components and subassemblies
as they pertain specifically to fibre optic sensing applications. It has been
designed to be used as a common working and discussion tool by the vendors of components
and subassemblies intended to be integrated in fibre optic sensors, as well as by designers,
manufacturers and users of fibre optic sensors independent of any application or installation.
The objective of this document is to define, classify and provide the framework for specifying
fibre optic sensors, and their specific components and subassemblies. The requirements of
this document apply to all related fibre optic sensor standards which belong to IEC 61757 (all
parts). Standards of IEC 61757 (all parts) contain requirements specific to sensors for
particular quantities subject to measurement, and for a particular style or variant of such a
fibre optic sensor.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61757-2-2:2017(Main)
Fibre optic sensors - Part 3-1: Temperature measurement - Distributed sensing (IEC 61757-2-2:2016)
EN 61757-2-2:2017

This part of IEC 61757 defines detail specifications for distributed temperature measurement
by a fibre optic sensor, also known as fibre optic distributed temperature sensing (DTS). DTS
includes the use of Raman scattering, Brillouin scattering and Rayleigh scattering effects. In
addition, Raman scattering and Rayleigh scattering based measurements are performed with
a single-ended fibre configuration only. Brillouin scattering based measurements are
performed with a single-ended fibre or fibre loop configuration. The technique accessible from
both sides at same time (e. g. Brillouin optical time domain analysis, BOTDA) is referred to
here as a loop configuration. Generic specifications for fibre optic sensors are defined in
IEC 61757-1:2012.
This part of IEC 61757 specifies the most important DTS performance parameters and defines
the procedures for their determination. In addition to the group of performance parameters, a
list of additional parameters has been defined to support the definition of the measurement
specifications and their associated test procedures. The definitions of these additional
parameters are provided for informational purposes and should be included with the sets of
performance parameters.
A general test setup is defined in which all parameters can be gathered through a set of tests.
The specific tests are described within the clause for each measurement parameter. This
general test setup is depicted and described in Clause 4 along with a list of general
information that should be documented based upon the specific DTS instrument and test
setup used to measure these parameters as per IEC 61757-2-2.
Annex A provides a blank performance parameter table which should be used to record the
performance parameter values for a given DTS instrument and chosen optical test setup
configuration.
Annex B provides guidelines for optional determination of point defect effects.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day