SIST EN IEC 62148-17:2023

Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors (IEC 62148-17:2023)

IEC 62148-17: 2023 defines physical interface specifications for transmitter and receiver components with dual coaxial RF connectors. This second edition cancels and replaces the first edition published in 2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) IEC 61169-60 was added as a normative reference for SMPM connectors;
b) normative reference IEC 60874-1 (withdrawn) was replaced by IEC 61754 (all parts);
c) a reference to the terms and definitions of IEC 62007-1 was added in Clause 3;
d) a new column “Typical” was added to the tables in Figure 2 and Figure 3 to clarify the meaning of all listed values.

Aktive Lichtwellenleiterbauelemente und -Geräte – Gehäuse- und Schnittstellennormen – Teil 17: Sende- und Empfangsbauteile mit dualen HF-Koaxialsteckverbindern (IEC 62148-17:2023)

Composants et dispositifs actifs à fibres optiques - Normes de boîtiers et d'interface - Partie 17: Composants émetteurs et récepteurs munis de connecteurs coaxiaux RF doubles (IEC 62148-17:2023)

IEC 62148-17: 2023 définit les spécifications de l’interface physique des composants émetteurs et récepteurs avec deux connecteurs RF coaxiaux. Cette deuxième édition annule et remplace la première édition parue en 2013. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’édition précédente:
a) l’IEC 61169-60 a été ajoutée comme référence normative pour les connecteurs SMPM;
b) la référence normative IEC 60874-1 (annulée) a été remplacée par l’IEC 61754 (toutes les parties);
c) une référence aux termes et définitions de l’IEC 62007-1 a été ajoutée à l’Article 3;
d) une nouvelle colonne "Type" a été ajoutée dans les tableaux à la Figure 2 et à la Figure 3 pour clarifier la signification de toutes les valeurs énumérées.

Aktivne komponente in naprave optičnih vlaken - Standardi za ohišja in vmesnike - 17. del: Oddajniške in sprejemniške komponente z dvojnimi koaksialnimi radiofrekvenčnimi (RF) konektorji (IEC 62148-17:2023)

Standard IEC 62148-17: 2023 določa specifikacije fizičnega vmesnika oddajniških in sprejemniških komponent z dvojnimi koaksialnimi radiofrekvenčnimi (RF) konektorji. Druga izdaja razveljavlja in nadomešča prvo izdajo, objavljeno leta 2013. Ta izdaja je tehnično popravljena izdaja. Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
a) dodana je bila zveza s standardom IEC 61169-60 za konektorje SMPM;
b) zveza s standardom IEC 60874-1 (razveljavljen) je bila nadomeščena s standardom IEC 61754 (vsi deli);
c) v točki 3 je bil dodan sklic na izraze in definicije iz standarda IEC 62007-1;
d) v preglednicah na slikah 2 in 3 je bil za pojasnitev pomena vseh navedenih vrednosti dodan nov stolpec »Običajno«.

General Information

• Status: Published
• Public Enquiry End Date: 30-Mar-2023
• Publication Date: 08-Nov-2023
• ICS: 33.180.20 - Fibre optic interconnecting devices
• ICS: 33.180.99 - Other fibre optic equipment
• Technical Committee: MOC - Mobile Communications
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Nov-2023
• Due Date: 11-Jan-2024
• Completion Date: 09-Nov-2023
• Ref Project: EN IEC 62148-17:2023 - Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors

Relations

• Revised: SIST EN 62148-17:2014 - Fiber optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors
• Effective Date: 26-Jul-2022

Overview

EN IEC 62148-17:2023 (IEC 62148-17:2023) is a package and interface standard for fibre optic active components and devices, specifically defining the physical interfaces for transmitter and receiver components with dual coaxial RF connectors. This second edition updates the 2013 version and provides harmonized mechanical, electrical and PCB footprint specifications to ensure interchangeability and reliable system integration across optical RF and high-speed analogue/digital optical modules.

Key Topics

• Physical interface definitions: package outline drawings, recommended PCB footprint and mechanical tolerances for components with dual coaxial RF connectors.
• Electrical interface and terminal assignment: numbering of electrical terminals, coaxial connector assignment and functional descriptions for transmitter and receiver components.
• Coaxial connector types: inclusion of SMPM (via normative reference IEC 61169-60) and guidance on compatible RF connectors.
• Pigtail and fibre interfaces: mechanical guidance for pigtails and fibre coupling consistent with IEC 61754 series connector references.
• Electromagnetic compatibility (EMC): EMC requirements and considerations for module design and integration.
• Documentation clarity: added “Typical” column in package tables to clarify nominal values and tolerances (technical revision from the previous edition).
• Normative references and terms: alignment with other IEC documents such as IEC 62148-1 (general guidance) and IEC 62007-1 (terms and definitions for optoelectronic devices).

Applications

EN IEC 62148-17:2023 is used by organizations involved in the design, manufacture, testing and integration of optical transmitter and receiver modules where RF signals are carried via coaxial connectors. Typical applications include:

• Telecom and datacom transceivers requiring dual RF inputs/outputs.
• RF-over-fibre analog optical links and microwave photonics modules.
• Test and measurement instruments that interface optical active components with RF test equipment.
• PCB and mechanical designers creating footprints and enclosures for optical active devices.
• Component manufacturers and system integrators seeking cross-vendor compatibility and standardized interfaces.

Who should use this standard

• Optical module manufacturers and mechanical engineers
• PCB layout designers and RF engineers
• Test labs and compliance engineers
• Procurement and product managers coordinating component interoperability

Related Standards

• IEC 62148-1 - Package and interface standards: general and guidance
• IEC 61169-60 - RF coaxial connectors (SMPM)
• IEC 61754 (all parts) - Fibre optic connector interface standards
• IEC 62007-1 - Terms and definitions for semiconductor optoelectronic devices
• IEC 60793-2-50 - Single-mode fibre product specifications

Keywords: EN IEC 62148-17:2023, IEC 62148-17, fibre optic active components, dual coaxial RF connectors, transmitter receiver components, SMPM connectors, package and interface standards, PCB footprint, EMC.

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2023
Aktivne komponente in naprave optičnih vlaken - Standardi za ohišja in vmesnike -
17. del: Oddajniške in sprejemniške komponente z dvojnimi koaksialnimi
radiofrekvenčnimi (RF) konektorji (IEC 62148-17:2023)
Fibre optic active components and devices - Package and interface standards - Part 17:
Transmitter and receiver components with dual coaxial RF connectors (IEC 62148-
17:2023)
Aktive Lichtwellenleiterbauelemente und -Geräte – Gehäuse- und Schnittstellennormen –
Teil 17: Sende- und Empfangsbauteile mit dualen HF-Koaxialsteckverbindern (IEC
62148-17:2023)
Composants et dispositifs actifs à fibres optiques - Normes de boîtiers et d'interface -
Partie 17: Composants émetteurs et récepteurs munis de connecteurs coaxiaux RF
doubles (IEC 62148-17:2023)
Ta slovenski standard je istoveten z: EN IEC 62148-17:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62148-17

NORME EUROPÉENNE
EUROPÄISCHE NORM October 2023
ICS 33.180.99 Supersedes EN 62148-17:2014
English Version
Fibre optic active components and devices - Package and
interface standards - Part 17: Transmitter and receiver
components with dual coaxial RF connectors
(IEC 62148-17:2023)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -Geräte -
boîtiers et d'interface - Partie 17: Composants émetteurs et Gehäuse- und Schnittstellennormen - Teil 17: Sende- und
récepteurs avec deux connecteurs RF coaxiaux Empfangsbauteile mit dualen HF-Koaxialsteckverbindern
(IEC 62148-17:2023) (IEC 62148-17:2023)
This European Standard was approved by CENELEC on 2023-10-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62148-17:2023 E

European foreword
The text of document 86C/1880/FDIS, future edition 2 of IEC 62148-17, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62148-17:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-07-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-10-25
document have to be withdrawn
This document supersedes EN 62148-17:2014 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62148-17:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60191 (series) NOTE Approved as EN 60191 (series)
IEC 60825-1 NOTE Approved as EN 60825-1
IEC 60825-2 NOTE Approved as EN 60825-2
IEC 61000 (series) NOTE Approved as EN IEC 61000 (series)
IEC 61281-1 NOTE Approved as EN IEC 61281-1
IEC 62007-2 NOTE Approved as EN 62007-2
ISO 1101 NOTE Approved as EN ISO 1101
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 61169-60 - Radio-frequency connectors - Part 60: EN IEC 61169-60 -
Sectional specification for RF coaxial
connectors with push on mating -
Characteristic impedance 50 Ohm (type
SMPM)
IEC 61754 series Fibre optic interconnecting devices and EN 61754 series
passive components - Fibre optic
connector interfaces
IEC 62007-1 - Semiconductor optoelectronic devices for EN 62007-1 -
fibre optic system applications - Part 1:
Specification template for essential ratings
and characteristics
IEC 62148-1 - Fibre optic active components and devices EN IEC 62148-1 -
- Package and interface standards - Part 1:
General and guidance
IEC 62148-17 ®
Edition 2.0 2023-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Package and interface standards –

Part 17: Transmitter and receiver components with dual coaxial RF connectors

Composants et dispositifs actifs fibroniques – Normes de boîtiers et d’interface –

Partie 17: Composants émetteurs et récepteurs avec deux connecteurs RF

coaxiaux
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.99  ISBN 978-2-8322-7504-7

– 2 – IEC 62148-17:2023 © IEC 2023
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms, definitions, and abbreviated terms . 5
3.1 Terms and definitions . 5
3.2 Abbreviated terms . 6
4 Electromagnetic compatibility (EMC) requirements . 6
5 Classification . 6
6 Specification of transmitter component with dual coaxial RF connectors . 6
6.1 General . 6
6.2 Pigtail interface . 6
6.3 Electrical interface . 6
6.3.1 General . 6
6.3.2 Numbering of electrical terminals . 6
6.3.3 Coaxial connector . 7
6.3.4 Electrical terminal assignment . 7
6.4 Package outline and footprint . 8
6.4.1 Drawing of package outline . 8
6.4.2 Drawing of footprint . 9
7 Specification of receiver component with dual coaxial RF connectors . 10
7.1 General . 10
7.2 Pigtail interface . 10
7.3 Electrical interface . 11
7.3.1 General . 11
7.3.2 Numbering of electrical terminals . 11
7.3.3 Coaxial connector . 11
7.3.4 Electrical terminal assignment . 11
7.4 Package outline and footprint . 12
7.4.1 Drawing of package outline . 12
7.4.2 Drawing of footprint . 13
Bibliography . 14

Figure 1 – Electrical terminal numbering assignments for transmitter component with
dual coaxial RF connectors . 7
Figure 2 – Package outline drawing . 9
Figure 3 – Recommended pattern layout for the PCB . 10
Figure 4 – Electrical terminal numbering assignments for receiver component with dual
coaxial RF connectors . 11
Figure 5 – Package outline . 13
Figure 6 – Recommended pattern layout for the PCB . 13

Table 1 – Function definitions of transmitter terminals . 8
Table 2 – Function definitions of receiver terminals . 11

IEC 62148-17:2023 © IEC 2023 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –

Part 17: Transmitter and receiver components
with dual coaxial RF connectors

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
mis
...