Aerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard

This standard specifies the required characteristics, tests and tooling applicable to size 12, male coaxial, electrical contacts, type D, solder, class R, used in elements of connection according to EN 3155-002.
It shall be used together with EN 3155-001.
The associated female contacts are defined in EN 3155-031 and EN 3155-041.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 040: Elektrische koaxiale Stiftkontakte, Größe 12, Typ D, zum Löten, Klasse R - Produktnorm

Diese Norm legt die Anforderungen, Prüfungen und Werkzeuge für elektrische koaxiale Stiftkontakte, Größe 12, Typ D, zum Löten, Klasse R zur Verwendung in elektrischen Verbindungselementen nach EN 3155 002 fest.
Die vorliegende Norm ist in Verbindung mit EN 3155 001 zu verwenden.
Die zugehörigen Buchsenkontakte sind in EN 3155 031 und EN 3155 041 festgelegt.

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 040 : Contacts, électriques, coaxiaux, taille 12, mâles, type D, à souder, classe R - Norme de produit

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 040. del: Kontakti, električni, koaksialni, velikost 12, moški, tip D, za spajkanje, razred R - Standard za proizvod

General Information

Status
Published
Publication Date
20-Nov-2008
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
18-Nov-2008
Due Date
23-Jan-2009
Completion Date
21-Nov-2008

Buy Standard

Standard
EN 3155-040:2009
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 040: Elektrische koaxiale Stiftkontakte, Größe 12, Typ D, zum Löten, Klasse R - ProduktnormSérie aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 040 : Contacts, électriques, coaxiaux, taille 12, mâles, type D, à souder, classe R - Norme de produitAerospace series - Electrical contacts used in elements of connection - Part 040: Contacts, electrical, coaxial, size 12, male, type D, solder, class R - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3155-040:2007SIST EN 3155-040:2009en01-januar-2009SIST EN 3155-040:2009SLOVENSKI
STANDARD



SIST EN 3155-040:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3155-040April 2007ICS 49.060 English VersionAerospace series - Electrical contacts used in elements ofconnection - Part 040: Contacts, electrical, coaxial, size 12,male, type D, solder, class R - Product standardSérie aérospatiale - Contacts électriques utilisés dans lesorganes de connexion - Partie 040 : Contacts, électriques,coaxiaux, taille 12, mâles, type D, à souder, classe R -Norme de produitLuft- und Raumfahrt - Elektrische Kontakte zur Verwendungin Verbindungselementen - Teil 040: Elektrische koaxialeStiftkontakte, Größe 12, Typ D, zum Löten, Klasse R -ProduktnormThis European Standard was approved by CEN on 6 January 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3155-040:2007: ESIST EN 3155-040:2009



EN 3155-040:2007 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Required characteristics.5 4.1 Specific characteristics.5 4.2 Dimensions and mass.5 4.3 Marking by colour code.6 4.4 Material, surface treatment.6 4.4.1 Material.6 4.4.2 Protective coating.6 4.4.3 Dielectric.6 4.4.4 Heat shrinkable tubing.6 4.4.5 Solder rings.7 4.5 Permissible cables.7 4.6 Stripping of cables and wiring method.7 4.6.1 Assembly instructions.7 4.6.2 Preparation of coaxial cable.7 4.7 Tooling.9 4.7.1 Contact termination tooling.9 4.7.2 Insertion/extraction tooling.9 4.8 Tests.10 4.9 Gauge.13 5 Designation.14 6 Marking.14 7 Technical specification.14
SIST EN 3155-040:2009



EN 3155-040:2007 (E) 3 Foreword This document (EN 3155-040:2007) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2007, and conflicting national standards shall be withdrawn at the latest by October 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3155-040:2009



EN 3155-040:2007 (E) 4 Introduction The contacts defined by this standard are derived from those of AS 39029/74 and are intermateable with those of AS 39029/73. 1 Scope This standard specifies the required characteristics, tests and tooling applicable to size 12, male coaxial, electrical contacts, type D, solder, class R, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated female contacts are defined in EN 3155-031 and EN 3155-041. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591*,
Aerospace series — Elements of electrical and optical connection — Test methods. EN 3155-001,
Aerospace series — Electrical contacts used in elements of connection — Part 001: Technical specification. 1) EN 3155-002,
Aerospace series — Electrical contacts used in elements of connection — Part 002: List and utilization of contacts. EN 3155-031,
Aerospace series — Electrical contacts used in elements of connection — Part 031: Contacts, electrical, coaxial, size 12, female, type D, crimp, class R — Product standard. 1) EN 3155-041,
Aerospace series — Electrical contacts used in elements of connection — Part 041: Contacts, electrical, coaxial, size 12, female, type D, solder, class R — Product standard. MIL-I-81969,
Installing and removal tools, conn
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.