SIST EN 61300-2-14:2013
(Main)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power (IEC 61300-2-14:2012)
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power (IEC 61300-2-14:2012)
This part of IEC 61300 describes a procedure for determining the suitability to a fibre optic interconnecting device or a passive component to withstand the exposure to optical power that may occur during operation.
Lichtwellenleiter - Verbindungselemente und passive Bauteile; Grundlegende Prüf- und Meßverfahren - Teil 2-14: Prüfungen - Optische Leistung (IEC 61300-2-14:2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-14: Essais - Puissance optique élevée (CEI 61300-2-14:2012)
La CEI 61300-2-14:2012 décrit une méthode en vue de déterminer l'aptitude d'un dispositif d'interconnexion ou d'un composant passif à fibres optiques à résister à l'exposition à une puissance optique susceptible d'apparaître au cours du fonctionnement. Cette troisième édition annule et remplace la deuxième édition publiée en 2005. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: un changement fondamental dans la méthode de mesure, pour introduire des environnements de mesure différents, par exemple des ressources d'essai limitées. Mots clés: exposition à une puissance optique
Optični spojni elementi in pasivne komponente - Osnovni preskusni in merilni postopki - 2-14. del: Preskusi - Optična moč (IEC 61300-2-14:2012)
V tem delu standarda IEC 61300 je opisan postopek za ugotavljanje primernosti optičnih spojnih elementov in pasivnih komponent za odpornost proti izpostavljenosti optični moči, ki se lahko pojavi med delovanjem.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtwellenleiter - Verbindungselemente und passive Bauteile; Grundlegende Prüf- und Meßverfahren - Teil 2-14: Prüfungen - Optische Leistung (IEC 61300-2-14:2012)Dispositifs d'interconnexion et composants passifs à fibres optiques - Méthodes fondamentales d'essais et de mesures - Partie 2-14: Essais - Puissance optique élevée (CEI 61300-2-14:2012)Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - Optical power (IEC 61300-2-14:2012)33.180.20Fibre optic interconnecting devicesICS:Ta slovenski standard je istoveten z:EN 61300-2-14:2013SIST EN 61300-2-14:2013en01-april-2013SIST EN 61300-2-14:2013SLOVENSKI
STANDARDSIST EN 61300-2-14:20061DGRPHãþD
SIST EN 61300-2-14:2013
EUROPEAN STANDARD EN 61300-2-14 NORME EUROPÉENNE
EUROPÄISCHE NORM February 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61300-2-14:2013 E
ICS 33.180.20 Supersedes EN 61300-2-14:2006 + corr. Nov.2006
English version
Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures -
Part 2-14: Tests -
High optical power (IEC 61300-2-14:2012)
Dispositifs d'interconnexion et composants passifs à fibres optiques -
Méthodes fondamentales d'essais et de mesures -
Partie 2-14: Essais -
Puissance optique élevée (CEI 61300-2-14:2012)
Lichtwellenleiter -
Verbindungselemente und passive Bauteile -
Grundlegende Prüf- und Messverfahren -
Teil 2-14: Prüfungen -
Hohe Optische Leistung (IEC 61300-2-14:2012)
This European Standard was approved by CENELEC on 2012-12-12. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 61300-2-14:2013
EN 61300-2-14:2013 - 2 -
Foreword The text of document 86B/3488/FDIS, future edition 3 of IEC 61300-2-14, prepared by SC 86B, "Fibre optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics", was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61300-2-14:2013.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-09-12 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2013-12-12
This document supersedes EN 61300-2-14:2006 + corrigendum November 2006. EN 61300-2-14:2013 includes the following significant technical changes with respect to EN 61300-2-14:2006: – fundamental change of the measurement method to introduce various measurement environments such as limited testing resources. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard IEC 61300-2-14:2012 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61300 series NOTE
Harmonized in EN 61300 series. IEC 61300-3-4 NOTE
Harmonized as EN 61300-3-4.
SIST EN 61300-2-14:2013
- 3 - EN 61300-2-14:2013
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the refere
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.