SIST EN 13451-10:2014
(Main)Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
EN 13451-10 specifies safety requirements for diving platforms, diving springboards and associated equipment in addition to the general safety requirements of EN 13451-1 and should be read in conjunction with it. The requirements of this part of EN 13451 take priority over those in EN 13451-1. This part of EN 13451 is applicable to platforms and springboards, and associated equipment for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2.
Schwimmbadgeräte - Teil 10: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Sprungplattformen, Sprungbretter und zugehörige Geräte
Dieser Teil der EN 13451 legt sicherheitstechnische Anforderungen an Sprungplattformen, Sprungbretter und zugehörige Geräte zusätzlich zu den allgemeinen sicherheitstechnischen Anforderungen nach EN 13451 1 fest und sollte in Verbindung damit gelesen werden.
Die Anforderungen dieses Teils der EN 13451 haben Vorrang gegenüber EN 13451 1.
Dieser Teil der EN 13451 gilt für Sprungplattformen, Sprungbretter und zugehörige Geräte zum Gebrauch in klassifizierten Schwimmbädern nach den Festlegungen in EN 15288 1 und EN 15288 2.
Équipement de piscines - Partie 10: Exigences de sécurité et méthodes d'essai complémentaires propres aux plates-formes de plongeon, plongeoirs et à l'équipement associé
La présente partie de l’EN 13451 spécifie les exigences de sécurité relatives aux plates-formes de plongeon, plongeoirs et à l’équipement associé qui viennent compléter les exigences générales de sécurité de l’EN 13451-1 et il convient de la lire conjointement avec cette dernière.
Les exigences de la présente norme spécifique ont la priorité sur celles de l’EN 13451-1.
La présente partie de l’EN 13451 est applicable aux plates-formes de plongeon, plongeoirs et à l’équipement associé destinés à être utilisés pour les piscines classées comme spécifié dans l'EN 15288 1 et l'EN 15288-2.
Oprema za plavalne bazene - 10. del: Dodatne posebne varnostne zahteve in preskusne metode za odskočne ploščadi, odskočne deske in pripadajočo opremo
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schwimmbadgeräte - Teil 10: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Sprungplattformen, Sprungbretter und zugehörige GeräteÉquipement de piscines - Partie 10: Exigences de sécurité et méthodes d'essai complémentaires propres aux plates-formes de plongeon, plongeoirs et à l'équipement associéSwimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 13451-10:2014SIST EN 13451-10:2014en,fr,de01-marec-2014SIST EN 13451-10:2014SLOVENSKI
STANDARDSIST EN 13451-10:20041DGRPHãþD
SIST EN 13451-10:2014
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13451-10
January 2014 ICS 97.220.10 Supersedes EN 13451-10:2004English Version
Swimming pool equipment - Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment
Équipement de piscine - Partie 10: Exigences de sécurité et méthodes d'essai complémentaires propres aux plates-formes de plongeon, plongeoirs et à l'équipement associé Schwimmbadgeräte - Teil 10: Zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren für Sprungplattformen, Sprungbretter und zugehörige Geräte This European Standard was approved by CEN on 6 December 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13451-10:2014 ESIST EN 13451-10:2014
EN 13451-10:2014 (E) 2 Contents Page
Foreword .3 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms and definitions .6 4 Safety requirements .7 4.1 Tolerances .7 4.2 Diving platforms.7 4.2.1 General .7 4.2.2 Dimensions .7 4.2.3 Structural integrity . 12 4.2.4 Clearance zones. 12 4.3 Diving springboards . 13 4.3.1 General . 13 4.3.2 Dimensions . 13 4.3.3 Structural integrity . 17 4.3.4 Adjustable fulcrum . 17 4.3.5 Clearance zones. 18 4.4 Means of access . 18 4.4.1 General . 18 4.4.2 Stepladders for diving facilities . 18 4.5 Safety barriers . 19 4.6 Slip resistance . 20 4.7 Water diving zones . 21 4.8 Agitation of water surface . 21 4.9 Air cushion equipment . 21 4.9.1 Air inlets . 21 4.9.2 Operating console . 21 5 Test methods . 22 5.1 General . 22 5.2 Structural integrity of diving springboards . 22 5.2.1 Diving springboards Type 1 . 22 5.2.2 Diving springboards Type 2 . 22 5.3 Structural integrity of stepladders . 23 5.3.1 Treads . 23 5.3.2 Handle bends . 23 5.3.3 Stepladder complete structure . 23 5.4 Structural integrity of safety barriers . 24 5.4.1 Test procedure . 24 5.4.2 Compliance . 24 5.4.3 Failure . 24 Bibliography . 25
SIST EN 13451-10:2014
EN 13451-10:2014 (E) 3 Foreword This document (EN 13451-10:2014) has been prepared by Technical Committee CEN/TC 136 “Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July 2014, and conflicting national standards shall be withdrawn at the latest by July 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13451-10:2004. In relation to EN 13451-10:2004, the following significant changes have been made: a) an introduction has been added; b) the scope has been amended by referring to EN 15288-1 and EN 15288-2; c) normative references have been updated; d) dimensions of diving platform facilities have been revised; e) dimensions of diving springboard facilities have been revised; f) figures have been updated and revised; g) Annex A “Dimensional requirements of FINA, abstract from FINA 2003-2005 Handbook” has been deleted; h) a bibliography has been added. EN 13451, Swimming pool equipment consists of the following parts: — Part 1: General safety requirements and test methods; — Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends; — Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features; — Part 4: Additional specific safety requirements and test methods for starting platforms; — Part 5: Additional specific safety requirements and test methods for lane lines; — Part 6: Additional specific safety requirements and test methods for turning boards; — Part 7: Additional specific safety requirements and test methods for water polo goals; — Part 10: Additional specific safety requirements and test methods for diving platforms, diving springboards and associated equipment; SIST EN 13451-10:2014
EN 13451-10:2014 (E) 4 — Part 11: Additional specific safety requirements and test methods for moveable pool floors and moveable bulkheads. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 13451-10:2014
EN 13451-10:2014 (E) 5 Introduction Diving is a voluntary movement into water with arms and head entering the water first or a voluntary movement into water with feet entering the water first while performing acrobatics. There can be additional requirements for purposes such as competition swimming, and advice should be sought from the governing body of the sport in question (see [1] and [2]). SIST EN 13451-10:2014
EN 13451-10:2014 (E) 6 1 Scope This part of EN 13451 specifies safety requirements for diving platforms, diving springboards and associated equipment in addition to the general safety requirements of EN 13451-1 and should be read in conjunction with it. The requirements of this part of EN 13451 take priority over those in EN 13451-1. This part of EN 13451 is applicable to platforms and springboards, and associated equipment for use in classified swimming pools as specified in EN 15288-1 and EN 15288-2. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 13451-1:2011, Swimming pool equipment - Part 1: General safety requirements and test methods EN 13451-3, Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features EN 22768-1, General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13451-1:2011 and the following apply. 3.1 diving facility installation designed to provide the opportunity of diving 3.2 diving platform raised rigid horizontal platform, protruding over the water, intended for diving 3.3 diving springboard type 1 raised flexible board, installed at a height 1,0 m ≤ h ≤ 3,05 m above water level and protruding over the water, intended for diving 3.4 diving springboard type 2 raised flexible board, which can be permanently installed or portable, with a height < 1,0 m from water level and protruding over the water, intended for recreational diving 3.5 plummet line vertical line extending through the centre of the front edge of a platform or springboard SIST EN 13451-10:2014
EN 13451-10:2014 (E) 7 3.6 water agitation device device designed to improve visibility of the water surface by disturbance 3.7 air cushion equipment training device, designed for introducing air from the bottom of a diving pool, in front of a diving platform and/or springboard, to reduce the effects of the impact of the diver with the pool water and make training safer 4 Safety requirements 4.1 Tolerances Tolerances of height of the diving platform and diving springboards are 05,00+m. For all other tolerances, if not indicated EN 22768-1 applies. 4.2 Diving platforms 4.2.1 General Particular attention shall be paid to avoid glare and reflecting surfaces, which can disturb the vision of the diver. In Europe, outdoor diving facilities should face north. 4.2.2 Dimensions The dimensions indicated in Figures 1 to 4 and Tables 1 to 2 shall be complied with. The design of the equipment does not need to comply with the examples given. Platforms shall be horizontal. The minimum dimensions of the platforms shall comply with Table 1. Table 1 — Areas of use Dimensions in metres Height of platforms
from water level Minimum usable width Length reserved for the diver a 1 0,60 0,75 3 0,60 1,25 5 1,50 1,25 7,5 1,50 1,50 10 3,00 1,50 a Minimum distance back from plummet. NOTE 1 In addition to the length reserved for the diver (minimum distance back from plummet), additional space can be necessary for other purposes, as wider range of dives (e.g. dives with preliminary run), space for waiting for the dive, space for divers passing to the next platform. SIST EN 13451-10:2014
EN 13451-10:2014 (E) 8 If synchronized diving (more than one diver starting at a same time from the platform) is foreseen, the width of the platforms should be suitably increased. As an alternative, during synchronized diving activities only there should be the possibility to increase temporarily the distance of the safety barriers for arm movement (see [1]). The minimum dimensions of the platform facilities shall comply with Table 2 and with Figure 1. Table 2 — Minimum dimensions of diving platform facilities Dimensions in metres Minimum height of platform
from water level 1 m 3 m 5 m 7,5 m 10 m horizontal vertical horizontal vertical horizontal vertical horizontal vertical horizontal vertical A From plummet back to pool wall 0,75 — 1,25 — 1,25
1,50 — 1,50 — A/Aa From plummet back to platform plummet vertically below — — — — 0,75 — 0,75 — 0,75 — B From plummet to pool wall at side 2,30 — 2,80 — 3,25 — 4,25 — 5,25 — Cb From plummet to adjacent plummet 1,65 — 2,00 — 2,25 — 2,50 — 2,75 — D From plummet to pool wall ahead 8,00 — 9,50 — 10,25 — 11,00 — 13,50 — E From plummet, on board to ceiling — 3,25 — 3,25 — 3,25 — 3,25 — 4,00 F Clear overhead behind and each side of plummet 2,75 3,25 2,75 3,25 2,75 3,25 2,75 3,25 2,75 4,00 G Clear overhead ahead of plummet 5,00 3,25 5,00 3,25 5,00 3,25 5,00 3,25 6,00 4,00 H Depth of water at plummet — 3,20 — 3,50 — 3,70 — 4,10 — 4,50 J/K Distance and depth ahead of plummet 4,50 3,10 5,50 3,40 6,00 3,60 8,00 4,00 11,00 4,25 L/M Distance and depth each side of plummet 1,40 3,10 1,80 3,40 3,00 3,60 3,75 4,00 4,50 4,25 N Maximum slope to reduce dimensions beyond full requirements pool depth 30° NOTE The dimension C applies also to combinations of platform and spring board (e.g. 5 m platform combined with a 3 m spring board). ceiling 30° a If a platform is vertically below another platform the dimension E shall be applied. b Dimensions C apply to platfor
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.