SIST EN ISO 105-X12:2002
(Main)Textiles - Tests for colour fastness - Part X12: Color fastness to rubbing (ISO 105-X12:2001)
Textiles - Tests for colour fastness - Part X12: Color fastness to rubbing (ISO 105-X12:2001)
Textilien - Farbechtheitsprüfungen - Teil X12: Reibechtheit von Färbungen (ISO 105-X12:2001)
Dieser Teil von ISO 105 beschreibt ein Prüfverfahren zur Bestimmung der Widerstandsfähigkeit der Farbe von Textilien jeder Art, eingeschlossen textile Bodenbeläge und andere Polgewebe, gegen das Abreiben und Anbluten an andere Materialien.
Das Verfahren ist anwendbar auf gefärbte oder bedruckte Gewebe aus allen Fasern in Form von Garnen oder Flächengebilden, einschließlich textiler Bodenbeläge, egal ob gefärbt oder bedruckt.
Zwei Prüfungen werden durchgeführt, eine mit einem trockenen und eine mit einem nassen Reibgewebe.
Textiles - Essais de solidité des teintures - Partie X12: Solidité des teintures au frottement (ISO 105-X12:2001)
Tekstilije - Preskušanje barvne obstojnosti - Del X12: Barvna obstojnost pri drgnjenju (ISO 105-X12:2001)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 105-X12:2002
01-november-2002
1DGRPHãþD
SIST EN ISO 105-X12:1996
Tekstilije - Preskušanje barvne obstojnosti - Del X12: Barvna obstojnost pri
drgnjenju (ISO 105-X12:2001)
Textiles - Tests for colour fastness - Part X12: Color fastness to rubbing (ISO 105-
X12:2001)
Textilien - Farbechtheitsprüfungen - Teil X12: Reibechtheit von Färbungen (ISO 105-
X12:2001)
Textiles - Essais de solidité des teintures - Partie X12: Solidité des teintures au
frottement (ISO 105-X12:2001)
Ta slovenski standard je istoveten z: EN ISO 105-X12:2002
ICS:
59.080.01 Tekstilije na splošno Textiles in general
SIST EN ISO 105-X12:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 105-X12:2002
---------------------- Page: 2 ----------------------
SIST EN ISO 105-X12:2002
EUROPEAN STANDARD
EN ISO 105-X12
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2002
ICS 59.080.01 Supersedes EN ISO 105-X12:2002
English version
Textiles - Tests for colour fastness - Part X12: Color fastness to
rubbing (ISO 105-X12:2001)
Textiles - Essais de solidité des teintures - Partie X12: Textilien - Farbechtheitsprüfungen - Teil X12: Farbechtheit
Solidité des teintures au frottement (ISO 105-X12:2001) gegen Reiben (ISO 105-X12:2001)
This European Standard was approved by CEN on 19 August 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 105-X12:2002 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 105-X12:2002
EN ISO 105-X12:2002 (E)
Foreword
The text of ISO 105-X12:2001 has been prepared by Technical Committee ISO/TC 38 “Textiles”
of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 105-X12:2002 by Technical Committee CEN/TC 248 "Textiles and textile products", the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2003, and conflicting national
standards shall be withdrawn at the latest by March 2003.
This document supersedes EN ISO 105-X12:1995.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 105-X12:2001 has been approved by CEN as a
European Standard without any modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
2
---------------------- Page: 4 ----------------------
SIST EN ISO 105-X12:2002
EN ISO 105-X12:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated by (mod.),
the relevant EN/HD applies.
Publication Year Title EN/HD Year
ISO 105-A01 1994 Textiles - Tests for colour fastness - EN ISO 105-A01 1995
Part A01: General principles of testing
ISO 105-A03 1993 Textiles - Tests of colour fastness - Part EN 20105-A03 1994
A03: Grey scale for assessing staining
ISO 139 1973 Textiles - Standard atmospheres for EN 20139 1992
conditioning and testing
3
---------------------- Page: 5 ----------------------
SIST EN ISO 105-X12:2002
---------------------- Page: 6 ----------------------
SIST EN ISO 105-X12:2002
INTERNATIONAL ISO
STANDARD 105-X12
Fifth edition
2001-05-01
Corrected version
2002-06-01
Textiles — Tests for colour fastness —
Part X12:
Colour fastness to rubbing
Textiles — Essais de solidité des teintures —
Partie X12: Solidité des teintures au frottement
Reference number
ISO 105-X12:2001(E)
©
ISO 2001
---------------------- Page: 7 ----------------------
SIST EN ISO 105-X12:2002
ISO 105-X12:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be
edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file,
parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elec-
tronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's mem-
ber body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
©
ii ISO 2001 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 105-X12:2002
ISO 105-X12:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical com-
mittees. Each member body interested in a subject for which a technical committee has been established has the
right to be represented on that committee. International organizations, governmental and non-governmental, in liai-
son with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 105 may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 105-X12 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee
SC 1, Tests for coloured textiles and colorants.
This fifth edition cancels and replaces the fourth edition (ISO 105-X12:1993), which has been technically revised.
ISO 105 was previously published in thirteen “parts”, each designated by a letter (e.g. “Part A”), with publication
dates between 1978 and 1985. Each part contained a series of “sections”, each designated by the respective part
letter and by a two-digit serial number (e.g. “Section A01”). These sections are now being republished as separate
documents, themselves designated “parts” but retaining their earlier alphanumeric designations. A complete list of
these parts is given in ISO 105-A01.
This corrected and reprinted version of ISO 105-X12:2001 incorporates the following corre
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.