iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61334-3-21:1997

(Main)

Distribution automation using distribution line carrier systems -- Part 3: Mains signaling requirements -- Section 21: MV phase-to-phase isolated capacitive coupling device

Distribution automation using distribution line carrier systems -- Part 3: Mains signaling requirements -- Section 21: MV phase-to-phase isolated capacitive coupling device

Establishes definitions, requirements, methods of testing and rated values for phase-to-phase isolated capacitive coupling devices to be used in medium-voltage (MV) distribution line carrier systems.

Verteilungsautomatisierung mit Hilfe von Trägersystemen auf Verteilungsleitungen -- Teil 3: Netzbedingte Anforderungen an die Signalübertragung -- Hauptabschnitt 21: Kapazitiv getrennte Außenleiter-Außenleiter-Ankopplungseinrichtungen für Mittelspannung

Automatisation de la distribution à l'aide de systèmes de communication à courants porteurs -- Partie 3: Prescriptions concernant la transmission des signaux sur le secteur -- Section 21: Dispositif de couplage phase-phase capacitif isolé MT

Etablit des définitions, des prescriptions, des méthodes d'essais et spécifie des valeurs nominales pour les dispositifs de couplage capacitifs phase-phase isolés sur des systèmes DLC moyenne tension.

Distribution automation using distribution line carrier systems - Part 3: Mains signalling requirements - Section 21: MV phase-to-phase isolated capacitive coupling device

General Information

Status
Published
Publication Date
31-Jul-1997
ICS
33.040.50 - Lines, connections and circuits
Technical Committee
PSE - Power systems management
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Aug-1997
Due Date
01-Aug-1997
Completion Date
01-Aug-1997
Ref Project
EN 61334-3-21:1996 - Distribution automation using distribution line carrier systems - Part 3: Mains signaling requirements - Section 21: MV phase-to-phase isolated capacitive coupling device

Buy Standard

EN 61334-3-21:1997EN 61334-3-21:1997
PreviousNext
Standard
EN 61334-3-21:1997
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61334-3-21:1997
01-avgust-1997
Distribution automation using distribution line carrier systems - Part 3: Mains
signalling requirements - Section 21: MV phase-to-phase isolated capacitive
coupling device
Distribution automation using distribution line carrier systems -- Part 3: Mains signaling
requirements -- Section 21: MV phase-to-phase isolated capacitive coupling device
Verteilungsautomatisierung mit Hilfe von Trägersystemen auf Verteilungsleitungen -- Teil
3: Netzbedingte Anforderungen an die Signalübertragung -- Hauptabschnitt 21: Kapazitiv
getrennte Außenleiter-Außenleiter-Ankopplungseinrichtungen für Mittelspannung
Automatisation de la distribution à l'aide de systèmes de communication à courants
porteurs -- Partie 3: Prescriptions concernant la transmission des signaux sur le secteur -
- Section 21: Dispositif de couplage phase-phase capacitif isolé MT
Ta slovenski standard je istoveten z: EN 61334-3-21:1996
ICS:
33.040.50 Vodi, zveze in tokokrogi Lines, connections and
circuits
SIST EN 61334-3-21:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61334-3-21:1997

---------------------- Page: 2 ----------------------

SIST EN 61334-3-21:1997

---------------------- Page: 3 ----------------------

SIST EN 61334-3-21:1997

---------------------- Page: 4 ----------------------

SIST EN 61334-3-21:1997

---------------------- Page: 5 ----
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50173-20:2023(Main)
Information technology - Generic cabling systems - Part 20: Alternative cabling configurations
EN 50173-20:2022

1.1   Scope
This document specifies:
a)   configurations of cabling which use components meeting the requirements of EN 50173-1 but which do not conform to the structure of generic cabling specified in the premises-specific parts of EN 50173-X;
b)   channel transmission and environmental performance requirements including those by reference to EN 50173-1.
Test procedures to verify conformance of the balanced cabling configurations to the cabling transmission performance requirements of this document are provided in prEN 50697.
Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by other standards and regulations. However, information given in this document can be of assistance in meeting these standards and regulations.
1.2   Conformance
For a cabling to conform to this document the following applies:
a)   The configuration and structure of the cabling conforms to the requirements of Clause 4.
b)   Environmental performance meets the requirements of 5.1.
c)   Transmission performance meets the requirements of 5.2.
For balanced cabling, test methods to assess conformance with the transmission performance requirements are specified in prEN 50697.
For optical fibre cabling, test methods to assess conformance with the transmission performance requirements are specified in Annexes A, B and C.
d)   The requirements of EN 50174 series standards and EN 50310 are met.
This document provides the requirements and recommendations for testing, while the requirements for the sampling levels are provided in EN 50174-1:2018, Annex F.
The test parameters to be measured, the sampling levels and the treatment of measured results to be applied for a particular installation are defined in the installation specification and quality plans for that installation prepared in accordance with EN 50174 1.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50174-1:2018/A1:2020(Amendment)
Information technology - Cabling installation - Part 1: Installation specification and quality assurance
EN 50174-1:2018/A1:2020

This European Standard specifies requirements for the following aspects of information technology cabling:
a)   installation specification, quality assurance documentation and procedures;
b)   documentation and administration;
c)   operation and maintenance.
This European Standard is applicable to all types of information technology cabling including generic cabling systems designed in accordance with the EN 50173 series.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CLC/TR 50173-99-2:2020(Main)
Information technology - Implementation of BCT applications using cabling in accordance with EN 50173-4
CLC/TR 50173-99-2:2020

This Technical Report describes the following:
a)   the functional elements and structure of the cabling, external to homes, supporting community antenna television (CATV) and master antenna television/satellite master antenna television (MATV/SMATV) networks in accordance with EN 60728-1;
b)   the location and accommodation of the home network interface (HNI) in accordance with EN 60728-1;
c)   requirements for additional cabling performance requirements (i.e. insertion loss slope between 47 MHz and 862 MHz) and necessary amendments of the reference implementations of generic cabling within the home in accordance with EN 50173-4 in order to support the CATV, MATV/SMATV networks in accordance with EN 60728-1

  • Technical report
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CLC/TR 50174-99-2:2020(Main)
Information technology - Cabling installation - Part 99-2: Mitigation and protection from electrical interference
CLC/TR 50174-99-2:2020

This document addresses the mitigation and protection of telecommunications cabling from electromagnetic interference by describing:
a)   coupling mechanisms and possible countermeasures;
b)   assessment of the electromagnetic environment;
c)   filtering, isolation and surge protections measures.
Safety (electrical safety and protection, optical power, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this document and are covered by standards and regulations. However, information given in this document can be of assistance in meeting these standards and regulations.

  • Technical report
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50174-2:2018(Main)
Information technology - Cabling installation - Part 2: Installation planning and practices inside buildings
EN 50174-2:2018

1.1   Scope
This European Standard specifies requirements for the following aspects of information technology cabling:
a)   planning;
b)   installation practice.
This European Standard is applicable to all types of information technology cabling inside buildings (and may be applied to cabling that is defined as part of the building) including generic cabling systems designed in accordance with the EN 50173 series. The requirements of Clauses 4, 5 and 6 of this standard are premises-independent unless amended by the requirements of premises-specific clauses.
This European Standard:
1)   details the considerations for satisfactory installation and operation of information technology cabling;
2)   describes the methodology for the assessment of spaces, pathways (and pathway systems) and cabling (either installed or planned) in support of remote powering objectives;
3)   excludes specific requirements applicable to other cabling systems (e.g. power supply cabling); however, it takes account of the effects other cabling systems have on the installation of information technology cabling (and vice versa) and gives general advice;
4)   excludes those aspects of installation associated with the transmission of signals in free space between transmitters, receivers or their associated antenna systems (e.g. wireless, radio, microwave or satellite).
This European Standard is intended for application within commercial and residential premises.
This standard is applicable to certain hazardous environments. It does not exclude additional requirements which are applicable in particular circumstances, defined by e.g. electricity supply and electrified railways.
1.2   Conformance
For a cabling installation to conform to this European Standard:
a)   the planning of the installation shall meet the requirements of Clause 4;
b)   the installation practices shall meet the requirements of Clause 5;
c)   the additional requirements of the applicable premises-specific clause shall be met;
d)   the bonding system within the premises shall be in accordance with EN 50310;
e)   where a lightning protection system is required, it shall conform to the “integrated lightning protection system" according to EN 62305-4;
f)   other lightning protection systems, including the “isolated lightning protection system” according to EN 62305-3 are allowed provided that specific restrictions are applied both to the implementation of the information technology cabling and the requirements of EN 50310 as agreed between the planners of the lightning protection system and the information technology cabling;
g)   local regulations shall be met.
The responsibilities for specific elements of conformance may be made by national-specific amendment of Annex B.

  • Standard
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50174-1:2018(Main)
Information technology - Cabling installation - Part 1: Installation specification and quality assurance
EN 50174-1:2018

1.1   Scope
This European Standard specifies requirements for the following aspects of information technology cabling:
a)   installation specification, quality assurance documentation and procedures;
b)   documentation and administration;
c)   operation and maintenance.
This European Standard is applicable to all types of information technology cabling including generic cabling systems designed in accordance with the EN 50173 series.
Safety (electrical safety and protection, optical power, fire, etc.) and electromagnetic compatibility (EMC) requirements are outside the scope of this European Standard and are covered by other standards and regulations. However, information given in this European Standard may be of assistance in meeting these standards and regulations.
1.2   Conformance
For a cabling installation to conform to this European Standard:
a)   the specification of the installation shall meet the requirements of Clause 4;
NOTE   The requirements and recommendations of Clause 4 are primarily for owners of premises housing information technology systems. The owners may delegate selected responsibilities to designers, specifiers, operators and maintainers of installed information technology cabling. The party responsible for demonstrating conformance should be clearly stated in the appropriate section of the documentation.
b)   the installer shall meet the requirements of Clause 5;
c)   the bonding system within the premises shall be in accordance with EN 50310;
d)   where a lightning protection system is required, it shall conform to the “integrated lightning protection system” according to EN 62305 4;
e)   other lightning protection systems, including the “isolated lightning protection system” according to EN 62305 3 are allowed provided that specific restrictions are applied both to the implementation of the information technology cabling and the requirements of EN 50310 as agreed between the planners of the lightning protection system and the information technology cabling;
f)   local regulations shall be met.

  • Standard
    69 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50173-6:2018(Main)
Information technology - Generic cabling systems - Part 6: Distributed building services
EN 50173-6:2018

This standard specifies generic cabling for distributed building services and can be used in conjunction with all the space-specific standards of the EN 50173 series.
It covers balanced cabling and optical fibre cabling.
This standard specifies directly or via reference to EN 50173 1 the:
-   structure and minimum configuration for generic cabling for distributed building services;
-   interfaces at the service outlet (SO);
-   performance requirements for cabling links and channels;
-   implementation requirements and options;
-   performance requirements for cabling components;
-   conformance requirements and verification procedures.
This standard has taken into account requirements specified in application standards listed in EN 50173 1.
Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this standard and are covered by other standards and regulations. However, information given in this standard can be of assistance in meeting these standards and regulations.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50173-5:2018(Main)
Information technology - Generic cabling systems - Part 5: Data centre spaces
EN 50173-5:2018

This standard specifies generic cabling within computer room spaces in data centre premises, or data centre spaces within other types of building.
It covers balanced cabling and optical fibre cabling.
This standard specifies directly or via reference to EN 50173-1 the:
-   structure and minimum configuration for generic cabling within data centre spaces;
-   interfaces at the external network interface (ENI) and equipment outlet (EO);
-   performance requirements for cabling links and channels;
-   implementation requirements and options;
-   performance requirements for cabling components;
-   conformance requirements and verification procedures.
This standard has taken into account requirements specified in application standards listed in EN 50173-1.
Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this standard and are covered by other standards and regulations. However, information given in this standard can be of assistance in meeting these standards and regulations.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50173-1:2018(Main)
Information technology - Generic cabling systems - Part 1: General requirements
EN 50173-1:2018

This European Standard specifies:
a)   the structure and configuration of the backbone cabling subsystems of generic cabling systems within the types of premises and/or spaces defined by the other standards in the EN 50173 series;
b)   channel transmission and environmental performance requirements in support of the standards in the EN 50173 series (which have taken into account requirements specified in application standards listed in Annex F);
c)   link performance requirements in support of the standards in the EN 50173 series;
d)   backbone cabling reference implementations in support of the standards in the EN 50173 series;
e)   component performance requirements in support of the standards in the EN 50173 series;
f)   test procedures to verify conformance to the cabling transmission performance requirements of the standards in the EN 50173 series.
Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this European Standard and are covered by other standards and regulations. However, information given in this European Standard can be of assistance in meeting these standards and regulations.

  • Standard
    180 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50173-4:2018(Main)
Information technology - Generic cabling systems - Part 4: Homes
EN 50173-4:2018

This standard specifies generic cabling for homes. A home can contain one or more buildings or can be within a building that contains more than one home.
It covers balanced cabling, optical fibre cabling, and coaxial cabling.
This standard specifies generic cabling for two groups of applications:
-   Information and Communications Technologies (ICT);
-   Broadcast and Communications Technologies (BCT).
This standard specifies directly or via reference to EN 50173-1 the:
-   structure and minimum configuration for generic cabling within homes;
-   interfaces at the telecommunications outlet (TO) and broadcast outlet (BO);
-   performance requirements for cabling links and channels;
-   implementation requirements and options;
-   performance requirements for cabling components;
-   conformance requirements and verification procedures.
This standard has taken into account requirements specified in application standards listed in EN 50173-1.
Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this standard and are covered by other standards and regulations. However, information given in this standard can be of assistance in meeting these standards and regulations.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day