SIST EN ISO 21135:2024

Chemicals for the leather tanning industry - Determination of the total content of certain bisphenols (ISO 21135:2024)

This document specifies a method for determining the total content (solvent extractable) of the following
bisphenols in chemicals for the leather tanning industry:
— bisphenol A;
— bisphenol AF;
— bisphenol B;
— bisphenol F;
— bisphenol S.
This method requires the use of liquid chromatography (LC) with either a single quadrupole mass
spectrometer (MS), a triple quadrupole mass spectrometer (MS/MS), an ultraviolet (UV) detector, a diode
array detector (DAD) or a fluorescence detector (FLD) to identify and quantify the bisphenols.
NOTE 1 This method can also be used for other bisphenols if they are validated by the laboratory.
NOTE 2 Bisphenol S cannot be detected with FLD.

Chemikalien für die Gerbereiindustrie - Bestimmung des Gesamtgehalts von einzelnen Bisphenolen (ISO 21135:2024)

Dieses Dokument legt ein Verfahren zur Bestimmung des Gesamtgehalts (lösemittelextrahierbar) der folgenden Bisphenole in Chemikalien fest, die in der Gerbereiindustrie verwendet werden:
   Bisphenol A;
   Bisphenol AF;
   Bisphenol B;
   Bisphenol F;
   Bisphenol S.
Dieses Verfahren erfordert den Einsatz von Flüssigchromatographie (LC) entweder mit einem Single-Quadrupol-Massenspektrometer (MS), einem Triple-Quadrupol-Massenspektrometer (MS/MS), einem Ultraviolett (UV)-Detektor, einem Diodenarray-Detektor (DAD) oder einem Fluoreszenz-Detektor (FLD) zur Identifizierung und Quantifizierung der Bisphenole.
ANMERKUNG 1   Dieses Verfahren kann auch für andere Bisphenole verwendet werden, wenn sie vom Labor validiert wurden.
ANMERKUNG 2   Bisphenol S kann nicht mit FLD nachgewiesen werden.

Produits chimiques pour l’industrie du tannage du cuir - Détermination de la teneur totale en certains bisphénols (ISO 21135:2024)

Le présent document spécifie une méthode de détermination de la teneur totale (extractible par solvant) des bisphénols suivants dans les produits chimiques utilisés par l’industrie du tannage du cuir:
—     le bisphénol A;
—     le bisphénol AF;
—     le bisphénol B;
—     le bisphénol F;
—     le bisphénol S.
Cette méthode nécessite de recourir à la chromatographie en phase liquide (CL), couplée soit à un spectromètre de masse à simple quadripôle (MS), soit à un spectromètre de masse à triple quadripôle (MS/MS), soit à un détecteur ultraviolet (UV), soit à un détecteur à barrettes de diodes (DAD) ou un détecteur de fluorescence (FLD), afin d’identifier et de quantifier les bisphénols.
NOTE 1        Sous réserve de validation par le laboratoire, cette méthode peut également être utilisée pour d’autres bisphénols.
NOTE 2        Le bisphénol S ne peut pas être détecté au moyen d’un FLD.

Kemikalije za industrijo strojenja usnja - Določevanje celotne vsebnosti nekaterih bisfenolov (ISO 21135:2024)

Ta dokument določa metodo za določevanje celotne vsebnosti naslednjih bisfenolov (ki jih je mogoče izvleči s topili) v kemikalijah za industrijo strojenja usnja:
– bisfenol A;
– bisfenol AF;
– bisfenol B;
– bisfenol F;
– bisfenol S.
Ta metoda zahteva uporabo tekočinske kromatografije (LC) z masnim spektrometrom z enojnim kvadrupolom (MS), masnim spektrometrom s trojnim kvadrupolom (MS/MS), ultravijoličnim (UV) detektorjem, detektorjem z diodnim nizom (DAD) ali s fluorescenčnim detektorjem (FLD) za identifikacijo bisfenolov in ugotavljanje njihove količine.
OPOMBA 1: To metodo je mogoče uporabiti tudi za druge bisfenole, če se potrdijo v laboratoriju.
OPOMBA 2: Bisfenola S ni mogoče zaznati s fluorescenčnim detektorjem.

General Information

• Status: Published
• Public Enquiry End Date: 25-Oct-2023
• Publication Date: 09-Jun-2024
• ICS: 59.140.30 - Leather and furs
• Technical Committee: IUSN - Leather
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Jun-2024
• Due Date: 11-Aug-2024
• Completion Date: 10-Jun-2024
• Ref Project: EN ISO 21135:2024 - Chemicals for the leather tanning industry - Determination of the total content of certain bisphenols (ISO 21135:2024)

Standards Content (Sample)

SLOVENSKI STANDARD
01-julij-2024
Kemikalije za industrijo strojenja usnja - Določevanje celotne vsebnosti nekaterih
bisfenolov (ISO 21135:2024)
Chemicals for the leather tanning industry - Determination of the total content of certain
bisphenols (ISO 21135:2024)
Chemikalien für die Gerbereiindustrie - Bestimmung des Gesamtgehalts von einzelnen
Bisphenolen (ISO 21135:2024)
Produits chimiques pour l’industrie du tannage du cuir - Détermination de la teneur totale
en certains bisphénols (ISO 21135:2024)
Ta slovenski standard je istoveten z: EN ISO 21135:2024
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 21135
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2024
EUROPÄISCHE NORM
ICS 59.140.30
English Version
Chemicals for the leather tanning industry - Determination
of the total content of certain bisphenols (ISO 21135:2024)
Produits chimiques pour l'industrie du tannage du cuir Chemikalien für die Gerbereiindustrie - Bestimmung
- Détermination de la teneur totale en certains des Gesamtgehalts von einzelnen Bisphenolen (ISO
bisphénols (ISO 21135:2024) 21135:2024)
This European Standard was approved by CEN on 15 May 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 21135:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 21135:2024) has been prepared by Technical Committee ISO/IULTCS
"International Union of Leather Technologists and Chemists Societies" in collaboration with Technical
Committee CEN/TC 289 “Leather” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2024, and conflicting national standards
shall be withdrawn at the latest by November 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 21135:2024 has been approved by CEN as EN ISO 21135:2024 without any modification.

International
Standard
ISO
IULTCS
IUC 442
First edition
Chemicals for the leather tanning
2024-05
industry — Determination of the
total content of certain bisphenols
Produits chimiques pour l’industrie du tannage du cuir —
Détermination de la teneur totale en certains bisphénols
Reference numbers
ISO 21135:2024(en)
IULTCS/IUC 442:2024(en) © ISO 2024

ISO 21135:2024(en)
IULTCS/IUC 442:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii
ISO 21135:2024(en)
IULTCS/IUC 442:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Reagents . 2
7 Sampling and sample preparation . 3
8 Procedure . 4
8.1 Extraction .4
8.2 Instrumental analysis .4
9 Expression of results . 4
9.1 Calculation without internal standard .4
9.2 Calculation with internal standard .5
9.3 Calculation of the results as a sum .5
10 Precision . 5
11 Test report . 5
Annex A (informative) Chromatographic analysis operating parameters for LC-MS/MS . 7
Annex B (informative) Chromatographic analysis operating parameters for LC-MS . 9
Annex C (informative) Chromatographic analysis operating parameters for LC-UV, LC-DAD or
LC-FLD . 10
Annex D (informative) Precision: reliability of the method .11
Bibliography .13

iii
ISO 21135:2024(en)
IULTCS/IUC 442:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to further
the advancement of leather science and technology. IULTCS has three Commissions, which are responsible
for establishing international methods for the sampling and testing of leather. ISO recognizes IULTCS as an
international standardizing body for the preparation of test methods for leather.
This document was prepared by the Chemical Test Commission of the International Union of Leather
Technologists and Chemists Societies (IUC Commission, IULTCS), in collaboration with the European
Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.

iv
ISO 21135:2024(en)
IULTCS/IUC 442:2024(en)
Introduction
This document includes a procedure for analysing certain bisphenols in leather tanning chemicals using
liquid chromatography (LC) equipment. With this analytical method
...