SIST EN ISO 16282:2008
(Main)Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007)
Methods of test for dense shaped refractory products - Determination of resistance to abrasion at ambient temperature (ISO 16282:2007)
This International Standard specifies a method intended primarily for the determination of the abrasion resistance of shaped refractory materials at ambient temperature. It can also be used for unshaped refractory materials. It provides an indication of the suitability of the material for service in abrasive or erosive conditions.
Prüfverfahren für dichte geformte feuerfeste Erzeugnisse - Bestimmung der Beständigkeit gegen Abrieb bei Umgebungstemperatur (ISO 16282:2007)
Diese Internationale Norm legt ein Verfahren fest, das vornehmlich für die Bestimmung der Beständigkeit gegen Abrieb von geformten feuerfesten Werkstoffen bei Umgebungstemperatur vorgesehen ist. Sie ist auch auf ungeformte feuerfeste Werkstoffe anwendbar. Sie gibt Hinweise für die Eignung der Werkstoffe beim Einsatz unter Bedingungen von Abrieb und Erosion.
ANMERKUNG Diese Internationale Norm basiert auf und ist technisch identisch mit der vom Europäischen Komitee für Normung veröffentlichten EN 993 20.
Méthodes d'essai des produits réfractaires façonnés denses - Détermination de la résistance à l'abrasion à température ambiante (ISO 16282:2007)
L'ISO 16282 spécifie une méthode de détermination de la résistance à l'abrasion des matériaux réfractaires façonnés, à température ambiante. Elle fournit une indication quant à leur aptitude à être utilisés dans des conditions abrasives ou érosives. Elle peut également être appliquée dans le cas de matériaux réfractaires non façonnés.
Metode za preskušanje gostih oblikovanih ognjevzdržnih izdelkov - Določanje odpornosti proti površinski obrabi pri zunanji temperaturi (ISO 16282:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 16282:2008
01-oktober-2008
1DGRPHãþD
SIST EN 993-20:2004
0HWRGH]DSUHVNXãDQMHJRVWLKREOLNRYDQLKRJQMHY]GUåQLKL]GHONRY'RORþDQMH
RGSRUQRVWLSURWLSRYUãLQVNLREUDELSUL]XQDQMLWHPSHUDWXUL ,62
Methods of test for dense shaped refractory products - Determination of resistance to
abrasion at ambient temperature (ISO 16282:2007)
Prüfverfahren für dichte geformte feuerfeste Erzeugnisse - Bestimmung der
Beständigkeit gegen Abrieb bei Umgebungstemperatur (ISO 16282:2007)
Méthodes d'essai des produits réfractaires façonnés denses - Détermination de la
résistance à l'abrasion à température ambiante (ISO 16282:2007)
Ta slovenski standard je istoveten z: EN ISO 16282:2008
ICS:
81.080 Ognjevzdržni materiali Refractories
SIST EN ISO 16282:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 16282:2008
---------------------- Page: 2 ----------------------
SIST EN ISO 16282:2008
EUROPEAN STANDARD
EN ISO 16282
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 81.080 Supersedes EN 993-20:2004
English Version
Methods of test for dense shaped refractory products -
Determination of resistance to abrasion at ambient temperature
(ISO 16282:2007)
Méthodes d'essai des produits réfractaires façonnés Prüfverfahren für dichte geformte feuerfeste Erzeugnisse -
denses - Détermination de la résistance à l'abrasion à Bestimmung der Beständigkeit gegen Abrieb bei
température ambiante (ISO 16282:2007) Umgebungstemperatur (ISO 16282:2007)
This European Standard was approved by CEN on 17 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16282:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 16282:2008
EN ISO 16282:2008 (E)
Contents Page
Foreword.3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 16282:2008
EN ISO 16282:2008 (E)
Foreword
The text of ISO 16282:2007 has been prepared by Technical Committee ISO/TC 33 “Refractories” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 16282:2008 by
Technical Committee CEN/TC 187 “Refractory products and materials” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn
at the latest by November 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 993-20:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 16282:2007 has been approved by CEN as a EN ISO 16282:2008 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 16282:2008
---------------------- Page: 6 ----------------------
SIST EN ISO 16282:2008
INTERNATIONAL ISO
STANDARD 16282
First edition
2007-10-01
Methods of test for dense shaped
refractory products — Determination of
resistance to abrasion at ambient
temperature
Méthodes d'essai des produits réfractaires façonnés denses —
Détermination de la résistance à l'abrasion à température ambiante
Reference number
ISO 16282:2007(E)
©
ISO 2007
---------------------- Page: 7 ----------------------
SIST EN ISO 16282:2008
ISO 16282:2007(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall
not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the
unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2007
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
©
ii ISO 2007 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 16282:2008
ISO 16282:2007(E)
Contents Page
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Test pieces . 7
7 Procedure . 7
8 Calculation . 8
9 Precision . 8
10 Test report . 9
Bibliography . 10
©
ISO 2007 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 16282:2008
ISO 16282:2007(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16282 was prepared by Technical Committee ISO/TC 33, Refractories.
©
iv ISO 2007 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 16282:2008
INTERNATIONAL STANDARD ISO 16282:2007(E)
Methods of test for dense shaped refractory products —
Determination of resistance to abrasion at ambient temperature
1Scope
This International Standard specifies a method intended primarily for the determination of the abrasion
resistance of shaped refractory materials at ambient temperature. It can also be used for unshaped refractory
materials. It provides an indication of the suitability of the material for service in abrasive or erosive conditions.
NOTE This International Standard is based on and technically identical to EN 993-20, published by the European
Committee for Standardization.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
ISO 565, Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of
openings
ISO 5017, Dense shaped refractory products — Determination of bulk density, apparent porosity and true
1)
porosity
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
resistance to abrasion
resistance of refractory test pieces to the surface wear caused by the mechanical action of moving solids
3.2
resistance to erosion
resistance of refractory test pieces to the surface wear caused by the mechanical action of a fluid, which may or
may not contain solid material
4 Principle
The method determines the volume of material abraded from a flat surface of a test piece placed at right angles
to a nozzle through which 1 000 g of size-graded silicon carbide is blasted by compressed air at 450 kPa.
1) EN 993-1, which is referred to in the text of EN 993-20, is closely based on ISO 5017.
©
ISO 2007 – All rights reserved 1
---------------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.