SIST EN 3375-007:2009
(Main)Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard
Aerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard
This standard specifies the required characteristics of double braid, 77 Ohms, size 26 electrical cable type WW, intended for digital data transmissions.
Main electrical characteristics are given in 4.3.
It shall be used together with EN 3375-001 and EN 3375-002.
Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 007: Doppelt geschirmt - 77 Ohm - Type WW - Produktnorm
Diese Norm legt die Anforderungen an elektrische Leitungen für Digitaldatenübertragungen, doppelt geschirmt, 77 Ohm, Größe 26, Typ WW, fest.
Die elektrischen Haupteigenschaften sind in 4.3 angegeben.
Die Norm ist zusammen mit EN 3375 001 und EN 3375 002 zu verwenden.
Série aérospatiale - Câbles électriques pour transmission de données numériques - Partie 007 : Double tresse - 77 Ohms - Type WW - Norme de produit
Aeronavtika - Električni kabli za digitalni prenos podatkov - 007. del: Dvojni oplet - 77 ohmov - Tip WW - Standard za proizvod
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Leitungen für Digitaldatenübertragungen - Teil 007: Doppelt geschirmt - 77 Ohm - Type WW - ProduktnormSérie aérospatiale - Câbles électriques pour transmission de données numériques - Partie 007 : Double tresse - 77 Ohms - Type WW - Norme de produitAerospace series - Cable, electrical, for digital data transmission - Part 007: Double braid - 77 Ohms - Type WW - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3375-007:2006SIST EN 3375-007:2009en,de01-maj-2009SIST EN 3375-007:2009SLOVENSKI
STANDARD
SIST EN 3375-007:2009
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3375-007December 2006ICS 49.060 English VersionAerospace series - Cable, electrical, for digital data transmission- Part 007: Double braid - 77 Ohms - Type WW - ProductstandardSérie aérospatiale - Câbles électriques pour transmissionde données numériques - Partie 007 : Double tresse - 77Ohms - Type WW - Norme de produitLuft- und Raumfahrt - Elektrische Leitungen fürDigitaldatenübertragungen - Teil 007: Doppelt geschirmt -77 Ohms - Type WW - ProduktnormThis European Standard was approved by CEN on 28 September 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3375-007:2006: ESIST EN 3375-007:2009
EN 3375-007:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Required characteristics.5 5 Tests.6 6 Quality assurance.9 7 Identification and marking (according to EN 3375-002 and TR 6058).9 8 Packaging.10 9 Technical specification.10
SIST EN 3375-007:2009
EN 3375-007:2006 (E) 3 Foreword This document (EN 3375-007:2006) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at the latest by June 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 3375-007:2009
EN 3375-007:2006 (E) 4 1 Scope This standard specifies the required characteristics of double braid, 77 Ohms, size 26 electrical cable type WW, intended for digital data transmissions. Main electrical characteristics are given in 4.3. It shall be used together with EN 3375-001 and EN 3375-002. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2083, Aerospace series — Copper or copper alloy conductors for electrical cables — Product standard. EN 2084, Aerospace series — Cables, electric, single-core, general purpose, with conductors in copper or copper alloy — Technical specification. EN 2235, Aerospace series — Single and multicore electrical cables, screened and jacketed — Technical specification. EN 3375-001, Aerospace series — Cable, electrical, for digital data transmission — Technical specification. 1) EN 3375-002, Aerospace series — Cable, electrical, for digital data transmission — General. 1) EN 3475-100*, Aerospace series — Cables, electrical, aircraft use — Test methods — Part 100: General.
EN 9133, Aerospace series — Quality management systems — Qualification Procedure for aerospace standard parts. TR 6058, Aerospace series — Cable code and identification list. 2) 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 3475-100 apply.
* And all parts quoted in this standard. 1) Published as ASD Prestandard at the date of publication of this standard. 2) Published as ASD Technical Report at the date of publication of this standard. SIST EN 3375-007:2009
EN 3375-007:2006 (E) 5 4 Required characteristics 4.1 Dimensions and mass See Figure 1 and Table 1. 63541EN WW2
Key c Two cores size 26, according to EN 2083 C001 (AWG 26) d Insulation of elements: Fluorocarbon (colour: see 7.5) e Two fillers f Braid screen, silver plated copper (strand ∅ = 0,08 mm) g Braid screen, silver plated copper (strand ∅ = 0,08 mm) h Out
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.