SIST EN 12235:2013
(Main)Surfaces for sports areas - Determination of vertical ball behaviour
Surfaces for sports areas - Determination of vertical ball behaviour
This European Standard specifies a method for determining the rebound height of a ball from a surface, when dropped vertically.
Sportböden - Bestimmung der Ballreflexion
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Rücksprunghöhe eines Balls von einem Belag fest, wenn er senkrecht fallen gelassen wird.
Sols sportifs - Détermination du comportement en rebond vertical de la balle/du ballon
La présente Norme européenne spécifie une méthode de détermination de la hauteur de rebond d'une balle ou d’un ballon sur une surface, lorsqu’elle/il tombe verticalement.
Podloge za športne dejavnosti - Ugotavljanje obnašanja žoge pri navpičnem odboju
Ta evropski standard določa metodo za ugotavljanje višine odboja žoge od podloge pri navpičnem spustu.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DYSLþQHPRGERMXSportböden - Bestimmung der BallreflexionSols sportifs - Détermination du comportement en rebond vertical de la balle/du ballonSurfaces for sports areas - Determination of vertical ball behaviour97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:EN 12235:2013SIST EN 12235:2013en,fr,de01-november-2013SIST EN 12235:2013SLOVENSKI
STANDARDSIST EN 12235:2005/AC:2006SIST EN 12235:20051DGRPHãþD
SIST EN 12235:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12235
September 2013 ICS 97.220.10 Supersedes EN 12235:2004English Version
Surfaces for sports areas - Determination of vertical ball behaviour
Sols sportifs - Détermination du comportement en rebond vertical de la balle/du ballon
Sportböden - Bestimmung der Ballreflexion This European Standard was approved by CEN on 11 July 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12235:2013: ESIST EN 12235:2013
EN 12235:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Principle. 4 4 Apparatus . 4 5 Sports surface for testing . 5 6 Conditioning . 5 7 Procedure . 5 7.1 Determination of the rebound height of the ball from concrete . 5 7.2 Determination of the rebound height of the sports surface . 6 8 Expression of results . 6 9 Test report . 6
SIST EN 12235:2013
EN 12235:2013 (E) 3 Foreword This document (EN 12235:2013) has been prepared by Technical Committee CEN/TC 217 “Surfaces for sports areas”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2014, and conflicting national standards shall be withdrawn at the latest by March 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12235:2004. Compared with EN 12235:2004, the text has been clarified and editorial errors have been corrected. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 12235:2013
EN 12235:2013 (E) 4 1 Scope This European Standard specifies a method for determining the rebound height of a ball from a surface, when dropped vertically. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12229, Surfaces for sports areas — Procedure for the preparation of synthetic turf and needle-punch test pieces 3 Principle A ball is allowed to fall vertically onto a surface and the height to which it rebounds is measured and calculated as the percentage rebound height. 4 Apparatus 4.1 Ball, conforming to the regulations of the governing body of t
...
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DYSLþQHPRGERMXSportböden - Bestimmung der BallreflexionSols sportifs - Détermination du comportement en rebond vertical de la balle/du ballonSurfaces for sports areas - Determination of vertical ball behaviour97.220.10Športni objektiSports facilitiesICS:Ta slovenski standard je istoveten z:FprEN 12235kSIST FprEN 12235:2013en,fr,de01-marec-2013kSIST FprEN 12235:2013SLOVENSKI
STANDARD
kSIST FprEN 12235:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 12235
January 2013 ICS 97.220.10 Will supersede EN 12235:2004English Version
Surfaces for sports areas - Determination of vertical ball behaviour
Sols sportifs - Détermination du comportement en rebond vertical de la balle/du ballon
Sportböden - Bestimmung der Ballreflexion This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 217.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 12235:2013: EkSIST FprEN 12235:2013
FprEN 12235:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Normative references . 4 3 Principle. 4 4 Apparatus . 4 5 Sports surface for testing . 5 6 Conditioning . 6 7 Procedure . 6 7.1 Determination of the rebound height of the ball from concrete . 6 7.2 Determination of the rebound height of the sports surface . 6 8 Expression of results . 7 9 Test report . 7
kSIST FprEN 12235:2013
FprEN 12235:2013 (E) 3 Foreword This document (FprEN 12235:2013) has been prepared by Technical Committee CEN/TC 217 “Surfaces for sports areas”, the secretariat of which is held by BSI. This document is currently submitted to the Formal Vote. This document will supersede EN 12235:2004. kSIST FprEN 12235:2013
FprEN 12235:2013 (E) 4
1 Scope This European Standard specifies a method for determination of the rebound height of a ball from a surface, when dropped vertically. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12229, Surfaces for sports areas — Procedure for the preparation of synthetic turf and textile test pieces 3 Principle A ball is allowed to fall vertically onto a surface and the height to which it rebounds is measured and calculated as the percentage rebound height. 4 Apparatus 4.1 Ball, conforming to the regulations of the governing body of the relevant sport and with any additional requirements given in Table 1. NOTE These requirements have been found to be acceptable in use, and it has not been found necessary to specify additional requirements such as circumference or mass of the ball. kSIST FprEN 12235:2013
FprEN 12235:2013 (E) 5
Table 1 — Properties of balls Type of ball Drop height
(m) R
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.