iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 61252:2000/A2:2017

(Amendment)

Electroacoustics - Specifications for personal sound exposure meters (IEC 61252:1993/A2:2017)

Electroacoustics - Specifications for personal sound exposure meters (IEC 61252:1993/A2:2017)

Elektroakustik - Anforderungen an Personenschallexposimeter (IEC 61252:1993/A2:2017)

Electroacoustique - Spécifications des exposimètres acoustiques individuels (IEC 61252:1993/A2:2017)

Elektroakustika - Specifikacije za merilnike osebne izpostavljenosti zvoku - Dopolnilo A2 (IEC 61252:1993/A2:2017)

General Information

Status
Published
Publication Date
08-Aug-2017
ICS
13.140 - Noise with respect to human beings
17.140.50 - Electroacoustics
Technical Committee
I11 - Imaginarni 11
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
24-Jul-2017
Due Date
28-Sep-2017
Completion Date
09-Aug-2017
Ref Project
EN 61252:1995/A2:2017 - Electroacoustics - Specifications for personal sound exposure meters

Relations

Amends
SIST EN 61252:2000 - Electroacoustics - Specifications for personal sound exposure meters
Effective Date
02-Aug-2016

Buy Standard

EN 61252:2000/A2:2017EN 61252:2000/A2:2017
PreviousNext
Amendment
EN 61252:2000/A2:2017
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61252:2000/A2:2017
01-september-2017
Elektroakustika - Specifikacije za merilnike osebne izpostavljenosti zvoku -
Dopolnilo A2 (IEC 61252:1993/A2:2017)
Electroacoustics - Specifications for personal sound exposure meters (IEC
61252:1993/A2:2017)
Elektroakustik - Anforderungen an Personenschallexposimeter (IEC
61252:1993/A2:2017)
Electroacoustique - Spécifications des exposimètres acoustiques individuels (IEC
61252:1993/A2:2017)
Ta slovenski standard je istoveten z: EN 61252:1995/A2:2017
ICS:
13.140 Vpliv hrupa na ljudi Noise with respect to human
beings
17.140.50 Elektroakustika Electroacoustics
SIST EN 61252:2000/A2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61252:2000/A2:2017

---------------------- Page: 2 ----------------------

SIST EN 61252:2000/A2:2017


EUROPEAN STANDARD EN 61252:1995/A2

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2017
ICS 13.140; 17.140.50

English Version
Electroacoustics -
Specifications for personal sound exposure meters
(IEC 61252:1993/A2:2017)
Electroacoustique -  Elektroakustik -
Spécifications des exposimètres acoustiques individuels Anforderungen an Personenschallexposimeter
(IEC 61252:1993/A2:2017) (IEC 61252:1993/A2:2017)
This amendment A2 modifies the European Standard EN 61252:1995; it was approved by CENELEC on 2017-05-11. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61252:1995/A2:2017 E

---------------------- Page: 3 ----------------------

SIST EN 61252:2000/A2:2017
EN 61252:1995/A2:2017
European foreword
The text of document 29/910/CDV, future IEC 61252:1993/A2, prepared by IEC/TC 29
"Electroacoustics" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61252:1995/A2:2017.
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2018-02-11
national level by publication of an identical national
standard or by endorsement
• latest date by which the national standards conflicting with (dow) 2020-05-11
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 61252:1993/A2:2017 was approved by CE
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN IEC 60318-7:2023(Main)
Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of sound sources close to the ear (IEC 60318-7:2022)
EN IEC 60318-7:2022

This part of IEC 60318 describes a head and torso simulator, or manikin, intended for the measurement of sound sources placed close to the ear in the frequency range from 100 Hz to 16 000 Hz.
The manikin described in this part of IEC 60318 is intended for airborne acoustic measurements only. It is not suitable for measurements which depend upon vibration transmission paths such as bone conduction, or for measurements requiring the simulation of bone or tissue.
This document specifies the manikin in terms of both its geometrical dimensions and its acoustical properties. For conformance with this document, a manikin shall be compliant with both sets of specifications.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60318-8:2022(Main)
Electroacoustics - Simulators of human head and ear - Part 8: Acoustic coupler for highfrequency measurements of hearing aids and earphones coupled to the ear by means of ear inserts (IEC 60318-8:2022)
EN IEC 60318-8:2022

This part of IEC 60318 describes an acoustic coupler for loading a hearing aid or insert
earphone with a specified acoustic impedance when testing its acoustic performance, in the
frequency range up to 16 kHz. It is suitable for air-conduction hearing aids and earphones,
coupled to the ear by means of ear inserts, earmoulds or similar devices.
The acoustic coupler does not simulate the human ear. However, it has an effective volume of
only 0,4 cm3, which is small enough not to produce significant resonances in the coupler in the
frequency range below 16 kHz. Therefore, it will load the earphone with a known acoustic
impedance, which allows repeatable measurements with low uncertainty to be obtained on
earphones used in extended high-frequency audiometry.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60318-3:2015(Main)
Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry
EN 60318-3:2015

This part of IEC 60318 specifies an acoustic coupler for the measurement of supra-aural
audiometric earphones in the frequency range from 125 Hz to 8 000 Hz.
The sound pressure developed by an earphone is not, in general, the same in the coupler as
in a person's ear. However, the acoustic coupler can be used as an objective and
reproducible means of measuring the output of supra-aural earphones. It can be used for
specifying reference equivalent threshold sound pressure levels (RETSPL) for the calibration
of audiometers.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60318-4:2010
Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts (IEC 60318-4:2010)
EN 60318-4:2010

This part of IEC 60318 describes an occluded-ear simulator intended for the measurement of insert earphones in the frequency range from 100 Hz to 10 000 Hz. It is suitable for air conduction hearing aids and earphones, coupled to the ear by means of ear inserts e.g. ear moulds or similar devices. The occluded-ear simulator is also suitable as the basis for an extension intended to simulate the complete ear canal and the outer ear (for instance in head simulators). The occluded-ear simulator simulates the acoustic transfer impedance for the occluded normal adult human ear. However, it does not simulate the leakage between an earmould and a human ear canal; therefore, the results obtained with the occluded-ear simulator may deviate from the performance of an insert earphone on a real ear, especially at low frequencies. Moreover, large performance variations among individual ears will occur which should be considered when using the ear simulator. Above 10 kHz the device does not simulate a human ear, but can be used as an acoustic coupler at additional frequencies up to 16 kHz. Below 100 Hz, the device has not been verified to simulate a human ear, but can be used as an acoustic coupler at additional frequencies down to 20 Hz.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60318-1:2010(Main)
Electroacoustics - Simulators of human head and ear - Part 1: Ear simulator for the calibration of supra-aural and circumaural earphones (IEC 60318-1:2009)
EN 60318-1:2009

This part of IEC 60318 specifies an ear simulator for the measurement of supra-aural and circumaural earphones (used for example in audiometry and telephonometry) applied to the ear without acoustical leakage, in the frequency range from 20 Hz to 10 kHz. The same device can be used as an acoustic coupler at additional frequencies up to 16 kHz.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60318-5:2007(Main)
Electroacoustics - Simulators of human head and ear -- Part 5: 2 cm³ coupler for the measurement of hearing aids and earphones coupled to the ear by means of ear inserts
EN 60318-5:2006

This part of IEC 60318 describes an acoustic coupler for loading an earphone or hearing aid with a specified acoustic impedance when determining its physical performance characteristics, in the frequency range 125 Hz to 8 kHz. It is suitable for air conduction hearing aids and earphones, coupled to the ear by means of ear inserts e.g. ear moulds or similar devices. The sound pressure developed by an earphone is not, in general, the same in the coupler as in a person's ear. However, it can be used as a simple and ready means for the exchange of specifications and of physical data on hearing aids and for the calibration of specified insert earphones used in audiometry.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60318-7:2023(Main)
Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of sound sources close to the ear (IEC 60318-7:2022)
EN IEC 60318-7:2022

This part of IEC 60318 describes a head and torso simulator, or manikin, intended for the measurement of sound sources placed close to the ear in the frequency range from 100 Hz to 16 000 Hz.
The manikin described in this part of IEC 60318 is intended for airborne acoustic measurements only. It is not suitable for measurements which depend upon vibration transmission paths such as bone conduction, or for measurements requiring the simulation of bone or tissue.
This document specifies the manikin in terms of both its geometrical dimensions and its acoustical properties. For conformance with this document, a manikin shall be compliant with both sets of specifications.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60318-8:2022(Main)
Electroacoustics - Simulators of human head and ear - Part 8: Acoustic coupler for highfrequency measurements of hearing aids and earphones coupled to the ear by means of ear inserts (IEC 60318-8:2022)
EN IEC 60318-8:2022

This part of IEC 60318 describes an acoustic coupler for loading a hearing aid or insert
earphone with a specified acoustic impedance when testing its acoustic performance, in the
frequency range up to 16 kHz. It is suitable for air-conduction hearing aids and earphones,
coupled to the ear by means of ear inserts, earmoulds or similar devices.
The acoustic coupler does not simulate the human ear. However, it has an effective volume of
only 0,4 cm3, which is small enough not to produce significant resonances in the coupler in the
frequency range below 16 kHz. Therefore, it will load the earphone with a known acoustic
impedance, which allows repeatable measurements with low uncertainty to be obtained on
earphones used in extended high-frequency audiometry.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60318-3:2015(Main)
Electroacoustics - Simulators of human head and ear - Part 3: Acoustic coupler for the calibration of supra-aural earphones used in audiometry
EN 60318-3:2015

This part of IEC 60318 specifies an acoustic coupler for the measurement of supra-aural
audiometric earphones in the frequency range from 125 Hz to 8 000 Hz.
The sound pressure developed by an earphone is not, in general, the same in the coupler as
in a person's ear. However, the acoustic coupler can be used as an objective and
reproducible means of measuring the output of supra-aural earphones. It can be used for
specifying reference equivalent threshold sound pressure levels (RETSPL) for the calibration
of audiometers.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60318-4:2010
Electroacoustics - Simulators of human head and ear - Part 4: Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear inserts (IEC 60318-4:2010)
EN 60318-4:2010

This part of IEC 60318 describes an occluded-ear simulator intended for the measurement of insert earphones in the frequency range from 100 Hz to 10 000 Hz. It is suitable for air conduction hearing aids and earphones, coupled to the ear by means of ear inserts e.g. ear moulds or similar devices. The occluded-ear simulator is also suitable as the basis for an extension intended to simulate the complete ear canal and the outer ear (for instance in head simulators). The occluded-ear simulator simulates the acoustic transfer impedance for the occluded normal adult human ear. However, it does not simulate the leakage between an earmould and a human ear canal; therefore, the results obtained with the occluded-ear simulator may deviate from the performance of an insert earphone on a real ear, especially at low frequencies. Moreover, large performance variations among individual ears will occur which should be considered when using the ear simulator. Above 10 kHz the device does not simulate a human ear, but can be used as an acoustic coupler at additional frequencies up to 16 kHz. Below 100 Hz, the device has not been verified to simulate a human ear, but can be used as an acoustic coupler at additional frequencies down to 20 Hz.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day