iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50077:1998

(Main)

Low-profile connector for implantable cardiac pacemakers

Low-profile connector for implantable cardiac pacemakers

This European standard specifies a connector assembly to be used to connect implantable pacemaker leads to implantable pulse generators. Essential dimensions and performance requirements are specified, together with appropriate test methods. However, this standard does not address all aspects of the functional compatibility and reliability of different leads and pulse generators assembled into a pacemaker system: in particular, this standard does not specify certain essential features, such as the means of fastening the connector assembly, or the materials of construction. WARNING The connector cavity specified in this standard is not to be used with an implantable device if that device is capable of introducing dangerous non-pacing signals (e.g. defibrillation signals) through an IS-1 connector. This European standard supplements EN 50061 only for those pacemaker components which are claimed by their labelling to be fitted with an IS-1 connector assembly part. It does not replace any requirement in EN 50061 regarding leads.

Kleiner Profilstecker für implantierbare Herzschrittmacher

Connecteur à bas profil pour stimulateurs cardiaques implantables

Low-profile connector for implantable cardiac pacemakers

General Information

Status
Published
Publication Date
31-Aug-1998
ICS
11.040.40 - Implants for surgery, prosthetics and orthotics
Technical Committee
IEMO - Electrical equipment in medical practice
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-1998
Due Date
01-Sep-1998
Completion Date
01-Sep-1998
Mandate
BC/CLC/02-89 - BC/CLC/02-89
Ref Project
EN 50077:1993 - Low-profile connector for implantable cardiac pacemakers

Buy Standard

EN 50077:1998EN 50077:1998
PreviousNext
Standard
EN 50077:1998
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50077:1998
01-september-1998
Low-profile connector for implantable cardiac pacemakers
Low-profile connector for implantable cardiac pacemakers
Kleiner Profilstecker für implantierbare Herzschrittmacher
Connecteur à bas profil pour stimulateurs cardiaques implantables
Ta slovenski standard je istoveten z: EN 50077:1993
ICS:
11.040.40 Implantanti za kirurgijo, Implants for surgery,
protetiko in ortetiko prosthetics and orthotics
SIST EN 50077:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50077:1998

---------------------- Page: 2 ----------------------

SIST EN 50077:1998

---------------------- Page: 3 ----------------------

SIST EN 50077:1998

---------------------- Page: 4 ----------------------

SIST EN 50077:1998

---------------------- Page: 5 ----------------------

SIST EN 50077:1998

------------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
oSIST prEN 50447:2005(Main)
Active implantable medical devices - Particular requirements for Heart-Lung Machines (HLM)
prEN 50447

D127/107: Project under Benchemark 6 * Extension of target date approved until 2007-09-12 (no more extension allowed) * TC 62 decision on 2006-10-24: prEN 50447 deleted from work programme due to lack of sustained interest from stakeholders

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14708-3:2023(Main)
Implants for surgery - Active implantable medical devices - Part 3: Implantable neurostimulators (ISO 14708-3:2017)
EN ISO 14708-3:2022

ISO 14708-3:2008 is applicable to active implantable medical devices intended for electrical stimulation of the central or peripheral nervous system.
ISO 14708-3:2008 is also applicable to all non-implantable parts and accessories of the devices.
The tests that are specified in ISO 14708-3:2008 are type tests intended to be carried out on a sample of a device to show compliance, and are not intended to be used for the routine testing of manufactured products.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 21917:2023(Main)
Anaesthetic and respiratory equipment - Voice prostheses (ISO 21917:2021)
EN ISO 21917:2022

This document specifies performance requirements for voice prostheses including requirements for marking, packaging and information to be provided by the manufacturer as well as test methods for the evaluation of physical characteristics of voice prostheses.
NOTE      There is guidance or rationale for this list item contained in A.2.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14708-5:2022(Main)
Implants for surgery - Active implantable medical devices - Part 5: Circulatory support devices (ISO 14708-5:2020)
EN ISO 14708-5:2022

ISO 14708-5:2010 specifies requirements for safety and performance of active implantable circulatory support devices. It is not applicable to extracorporeal perfusion devices, cardiomyoplasty, heart restraint devices and counter-pulsation devices, such as extra- or intra-aortic balloon pumps.
ISO 14708-5:2010 specifies type tests, animal studies and clinical evaluation requirements.

  • Standard
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14708-7:2022(Main)
Implants for surgery - Active implantable medical devices - Part 7: Particular requirements for cochlear and auditory brainstem implant systems (ISO 14708-7:2019)
EN ISO 14708-7:2022

This document specifies requirements that are applicable to those active implantable medical devices
that are intended to treat hearing impairment via electrical stimulation of the auditory pathways.
Devices which treat hearing impairment via means other than electrical stimulation are not covered by
this document.
The tests that are specified in this document are type tests and are to be carried out on samples of a
device to show compliance.
This document is also applicable to non-implantable parts and accessories of the devices (see NOTE).
The electrical characteristics of the implantable part are determined by either the appropriate method
detailed in this document or by any other method demonstrated to have an accuracy equal to, or better
than, the method specified. In the case of dispute, the method detailed in this document applies.
NOTE A device that is commonly referred to as an active implantable medical device can in fact be a single
device, a combination of devices, or a combination of a device or devices and one or more accessories. Not all of
these parts are required to be either partially or totally implantable, this document specifies those requirements
of non-implantable parts and accessories which could affect the safety or performance of the implantable part.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14708-2:2022(Main)
Implants for surgery - Active implantable medical devices - Part 2: Cardiac pacemakers (ISO 14708-2:2019)
EN ISO 14708-2:2022

This document specifies requirements that are applicable to those active implantable medical devices
intended to treat bradyarrhythmias and devices that provide therapies for cardiac resynchronization.
The tests that are specified in this document are type tests, and are to be carried out on samples of a
device to show compliance.
This document was designed for bradyarrhythmia pulse generators used with endocardial leads
or epicardial leads. At the time of this edition, the authors recognized the emergence of leadless
technologies for which adaptations of this part will be required. Such adaptations are left to the
discretion of manufacturers incorporating these technologies.
This document is also applicable to some non-implantable parts and accessories of the devices (see
Note 1).
The electrical characteristics of the implantable pulse generator or lead are determined either by the
appropriate method detailed in this particular standard or by any other method demonstrated to have
an accuracy equal to, or better than, the method specified. In case of dispute, the method detailed in
this particular standard applies.
Any features of an active implantable medical device intended to treat tachyarrhythmias are covered
by ISO 14708-6.
NOTE 1 The device that is commonly referred to as an active implantable medical device can in fact be
a single device, a combination of devices, or a combination of a device or devices and one or more accessories.
Not all of these parts are required to be either partially or totally implantable, but there is a need to specify
some requirements of non-implantable parts and accessories if they could affect the safety or performance of the
implantable device.
NOTE 2 In this document, terms printed in italics are used as defined in Clause 3. Where a defined term is
used as a qualifier in another term, it is not printed in italics unless the concept thus qualified is also defined

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14708-6:2022(Main)
Implants for surgery - Active implantable medical devices - Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) (ISO 14708-6:2019)
EN ISO 14708-6:2022

This document specifies requirements that are applicable to implantable cardioverter defibrillators and
CRT-Ds and the functions of active implantable medical devices intended to treat tachyarrhythmia.
The tests that are specified in ISO 14708 are type tests and are to be carried out on samples of a device
to show compliance.
This document was designed for tachyarrhythmia pulse generators used with either endocardial leads
or epicardial leads. At the time of this edition, the authors recognized the emergence of technologies
that do not use endocardial or epicardial leads for which adaptations of this part will be required. Such
adaptations are left to the discretion of manufacturers incorporating these technologies.
This document is also applicable to some non-implantable parts and accessories of the devices (see
Note 1).
The characteristics of the implantable pulse generator or lead shall be determined by either the
appropriate method detailed in this document or by any other method demonstrated to have accuracy
equal to, or better than, the method specified. In the case of dispute, the method detailed in this
document shall apply.
Any aspect of an active implantable medical device intended to treat bradyarrhythmias or cardiac
resynchronization is covered by ISO 14708-2.
NOTE 1 The device that is commonly referred to as an active implantable medical device can in fact be
a single device, a combination of devices, or a combination of a device or devices and one or more accessories.
Not all of these parts are required to be either partially or totally implantable, but there is a need to specify
some requirements of non-implantable parts and accessories if they could affect the safety or performance of the
implantable device.
NOTE 2 In this document, terms printed in italics are used as defined in Clause 3. Where a defined term is
used as a qualifier in another term, it is not printed in italics unless the concept thus qualified is also defined.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    82 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14708-4:2022(Main)
Implants for surgery - Active implantable medical devices - Part 4: Implantable infusion pump systems (ISO 14708-4:2022)
EN ISO 14708-4:2022

ISO 14708-4:2008 is applicable to active implantable medical devices intended to deliver medicinal substances to site-specific locations within the human body.
ISO 14708-4:2008 is also applicable to some non-implantable parts and accessories of the devices.
The tests that are specified in ISO 14708-4:2008 are type tests intended to be carried out on a sample of a device to show compliance, and are not intended to be used for the routine testing of manufactured products.

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 5832-6:2022(Main)
Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromium-molybdenum alloy (ISO 5832-6:2022)
EN ISO 5832-6:2022

This document specifies the characteristics of, and corresponding test methods for, wrought cobaltnickel chromium-molybdenum alloy for use in the manufacture of surgical implants.
NOTE The tensile properties of a sample obtained from a finished product made of this alloy do not
necessarily comply with those specified in this document

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9713:2022(Main)
Neurosurgical implants - Self-closing intracranial aneurysm clips (ISO 9713:2022)
EN ISO 9713:2022

This document establishes the characteristics of self-closing aneurysm clips intended for permanent
intracranial implantation and specifies requirements for their marking, packaging, sterilization and
for labelling and accompanying documentation. In addition, it gives a method for the measurement of
closing force.
This document is not applicable to malleable clips, or clips intended to be used during the course of
surgery and removed before wound closure (temporary clips).
NOTE In this document when not otherwise established, the term “implant” refers to the self-closing
intracranial aneurysm clips.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day