EN 61784-1:2008

Industrial communication networks - Profiles - Part 1: Fieldbus profiles

It defines a set of protocol specific communication profiles based primarily on the IEC 61158 series, to be used in the design of devices involved in communications in factory manufacturing and process control. Each profile selects specifications for the communications protocol stack at a device. It contains a minimal set of required services at the Application Layer and specification of options in intermediate layers defined through references. If no Application Layer is included, then a minimal set of required services at the Data-link layer is specified. The appropriate references to the protocol specific types are given in each communication profile family or associated profiles. It includes the following significant technical changes from the previous edition: partition of IEC 61158 parts 3, 4 ,5, and 6 of the third edition into multiple parts numbered for example IEC 61158 6 1, 6 2, 6 3, ; deletion of the former Type 6 fieldbus in IEC 61158 series and CPF 7 for lack of market relevance; addition of new types of fieldbuses in IEC 61158 series leading to new CPF 8, 9, and 16.

Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile

Réseaux de communication industriels - Profils - Partie 1: Profils pour les bus de terrain

Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC 61784-1:2007)

General Information

• Status: Withdrawn
• Publication Date: 12-Jun-2008
• Withdrawal Date: 30-Apr-2011
• ICS: 35.100.20 - Data link layer
• ICS: 35.240.20 - IT applications in office work
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65C - IEC_SC_65C
• Parallel Committee: IEC/SC 65C - IEC_SC_65C
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Sep-2013
• Completion Date: 01-Sep-2013
• Ref Project: SIST EN 61784-1:2008 - Industrial communication networks - Profiles -- Part 1: Fieldbus profiles

Relations

• Replaces: EN 61784-1:2004 - Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems
• Effective Date: 28-Jan-2023
• Replaces: EN 61491:1998 - Electrical equipment of industrial machines - Serial data link for real-time communication between controls and drives
• Effective Date: 28-Jan-2023
• Replaced By: EN 61784-1:2010 - Industrial communication networks - Profiles - Part 1: Fieldbus profiles
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61784-1:2008
01-september-2008
1DGRPHãþD
SIST EN 61491:2001
SIST EN 61784-1:2004
Industrijska komunikacijska omrežja - Profili - 1. del: Profili procesnih vodil (IEC
61784-1:2007)
Industrial communication networks - Profiles - Part 1: Fieldbus profiles
Industrielle Kommunikationsnetze - Profile - Teil 1: Feldbusprofile
Réseaux de communication industriels - Profils - Partie 1: Profils pour les bus de terrain
Ta slovenski standard je istoveten z: EN 61784-1:2008
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN 61784-1:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61784-1:2008

---------------------- Page: 2 ----------------------

SIST EN 61784-1:2008

EUROPEAN STANDARD
EN 61784-1

NORME EUROPÉENNE
June 2008
EUROPÄISCHE NORM

ICS 35.240.50; 35.100.20 Supersedes EN 61491:1998 (partially) and EN 61784-1:2004


English version


Industrial communication networks -
Profiles -
Part 1: Fieldbus profiles
(IEC 61784-1:2007)


Réseaux de communication industriels -  Industrielle Kommunikationsnetze -
Profils - Profile -
Partie 1: Profils pour les bus de terrain Teil 1: Feldbusprofile
(CEI 61784-1:2007) (IEC 61784-1:2007)




This European Standard was approved by CENELEC on 2008-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61784-1:2008 E

---------------------- Page: 3 ----------------------

SIST EN 61784-1:2008
EN 61784-1:2008 - 2 -
Foreword
The text of document 65C/294/FDIS, future edition 2 of IEC 61784-1, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61784-1 on 2008-05-01.
This European Standard supersedes EN 61784-1:2004 + corrigendum December 2004.
This standard also partially replaces EN 61491:1998 which is at present being revised (to be issued as a
Technical Report).
EN 61784-1:2008 includes the following significant technical changes from EN 61784-1:2004:
– partition of EN 61158 Parts 3, 4 ,5, and 6 into multiple parts numbered for example EN 61158-6-1,
-6-2, -6-3, …;
– deletion of Type 6 fieldbus in EN 61158 series and CPF 7 for lack of market relevance;
– addition of new types of fieldbuses in EN 61158 series leading to new CPF 8, 9, and 16.
The following dates were fixed:

– latest date by which the EN has to be implemented

at national level by publication of an identical
(dop) 2009-02-01
national standard or by endorsement

– latest date by which the national standards conflicting
(dow) 2011-05-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61784-1:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60793 NOTE Harmonized in EN 60793 series (partially modified).
IEC 61131-3 NOTE Harmonized as EN 61131-3:2003 (not modified).
ISO/IEC 9506-1 NOTE Harmonized as EN ISO/IEC 29506-1:1993 (not modified).
ISO/IEC 9506-2 NOTE Harmonized as EN ISO/IEC 29506-2:1990 (not modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 61784-1:2008
- 3 - EN 61784-1:2008

Annex ZA
(no
...