SIST EN 4466:2009

Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 400 MPa

This standard specifies the requirements relating to:
Steel FE-PM1506 (X5CrNiMoAl13-8-2)
Vacuum induction melted and consumable electrode remelted
Solution treated and precipitation treated
Forgings
a or D ≤ 150 mm
Rm ≥ 1 400 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM1506 (X5CrNiMoAl13-8-2) - Vakuuminduktionserschmolzen und mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Schmiedestücke - a oder D ≤ 150 mm - Rm ≥ 1 400 MPa

Diese Norm legt die Anforderungen an
Stahl FE PM1506 (X5CrNiMoAl13-8-2)
Vakuuminduktionserschmolzen und
mit selbstverzehrender Elektrode umgeschmolzen
Lösungsgeglüht und ausgehärtet
Schmiedestücke
a oder D ≤ 150 mm
Rm  ≥  1 400 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PM1506 (X5CrNiMoAl13-8-2) - Élaboré sous vide par induction et refondu à l'électrode consommable - Mis en solution vieilli - Pièces forgées et pièces matricées - a ou D ≤ 150 mm - Rm ≥ 1 400 MPa

Aeronavtika - Jeklo FE-PM1506 (X5CrNiMoAl13-8-2) - Izkovki a ali D ≤ 150 mm - Rm ≥ 1400 MPa, taljeni z vakuumsko indukcijo in pretaljeni s talilno elektrodo, žarjeni v topilu in utrjeni

General Information

• Status: Published
• Publication Date: 31-Mar-2009
• ICS: 49.025.10 - Steels
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 23-Mar-2009
• Due Date: 28-May-2009
• Completion Date: 01-Apr-2009
• Ref Project: EN 4466:2007 - Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D ≤ 150 mm - Rm ≥ 1 400 MPa

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4466:2009
01-maj-2009
$HURQDYWLND-HNOR)(30;&U1L0R$O,]NRYNLDDOL'”PP5P
•03DWDOMHQL]YDNXXPVNRLQGXNFLMRLQSUHWDOMHQLVWDOLOQRHOHNWURGRåDUMHQLY
WRSLOXLQXWUMHQL
$HURVSDFHVHULHV6WHHO)(30;&U1L0R$O9DFXXPLQGXFWLRQPHOWHG
DQGFRQVXPDEOHHOHFWURGHUHPHOWHG6ROXWLRQWUHDWHGDQGSUHFLSLWDWLRQWUHDWHG
)RUJLQJVDRU'”PP5P•03D
/XIWXQG5DXPIDKUW6WDKO)(30;&U1L0R$O
9DNXXPLQGXNWLRQVHUVFKPRO]HQXQGPLWVHOEVWYHU]HKUHQGHU(OHNWURGHXPJHVFKPRO]HQ
/|VXQJVJHJOKWXQGDXVJHODJHUW6FKPLHGHVWFNHDRGHU'”PP5P•
03D
6pULHDpURVSDWLDOH$FLHU)(30;&U1L0R$OeODERUpVRXVYLGHSDU
LQGXFWLRQHWUHIRQGXjO
pOHFWURGHFRQVRPPDEOH0LVHQVROXWLRQYLHLOOL3LqFHVIRUJpHV
HWSLqFHVPDWULFpHVDRX'”PP5P•03D
Ta slovenski standard je istoveten z: EN 4466:2007
ICS:
49.025.10 Jekla Steels
SIST EN 4466:2009 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4466:2009

---------------------- Page: 2 ----------------------

SIST EN 4466:2009


EUROPEAN STANDARD
EN 4466

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2007
ICS 49.025.10
English Version
Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) -
Vacuum induction melted and consumable electrode remelted -
Solution treated and precipitation treated - Forgings - a or D ≤
150 mm - Rm ≥ 1 400 MPa
Série aérospatiale - Acier FE-PM1506 (X5CrNiMoAl13-8-2) Luft- und Raumfahrt - Stahl FE-PM1506 (X5CrNiMoAl13-8-
- Élaboré sous vide par induction et refondu à l'électrode
2) - Vakuuminduktionserschmolzen und mit
consommable - Mis en solution vieilli - Pièces forgées et selbstverzehrender Elektrode umgeschmolzen -
pièces matricées - a ou D ≤ 150 mm - Rm ≥ 1 400 MPa Lösungsgeglüht und ausgelagert - Schmiedestücke - a
oder D ≤ 150 mm - Rm ≥ 1 400 MPa
This European Standard was approved by CEN on 15 February 2007.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4466:2007: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4466:2009
EN 4466:2007 (E)
Foreword
This document (EN 4466:2007) has been prepared by the Aerospace and Defence Industries Association of
Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2008, and conflicting national standards shall be withdrawn at
the latest by January 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Fra
...