SIST EN 14037-3:2004
(Main)Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 3: Rating method and evaluation of radiant thermal output
Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 3: Rating method and evaluation of radiant thermal output
Definition of the test method for determining the thermal output of prefabricated ceiling mounted radiant panels fed with water at temperature below 120°C supplied from a remote source.
Deckenstrahlplatten für Wasser mit einer Temperatur unter 120 °C - Teil 3: Wärmetechnische Umrechnungen, Bewertungsmethoden und Festlegung der Strahlungs-Wärmeleistung
Panneaux rayonnants de plafond alimentés en eau a une température inférieure a 120 °C - Partie 3 : Méthode d'évaluation et calcul de la puissance thermique radiative
La présente Norme européenne décrit un mode opératoire pour la détermination de la puissance thermique finale (FD) et de la température moyenne de surface (trp).
Les panneaux rayonnants de plafond échangent leur énergie principalement par rayonnement.
Les méthodes d'essai pour la détermination de la puissance thermique d'un panneau rayonnant de plafond, décrites dans la partie 2 de la présente Norme européenne, fournissent des résultats fiables pour la comparaison de différents produits, mais ces résultats minimisent la puissance obtenue dans les conditions réelles d'utilisation.
Stropne sevalne plošče za vodo pri temperaturi pod 120 °C - 3. del: Metoda vrednotenja in ocena sevalne toplotne oddaje
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Deckenstrahlplatten für Wasser mit einer Temperatur unter 120 °C - Teil 3: Wärmetechnische Umrechnungen, Bewertungsmethoden und Festlegung der Strahlungs-WärmeleistungPanneaux rayonnants de plafond alimentés en eau a une température inférieure a 120 °C - Partie 3 : Méthode d'évaluation et calcul de la puissance thermique radiativeCeiling mounted radiant panels supplied with water at temperature below 120 °C - Part 3: Rating method and evaluation of radiant thermal output91.140.10Sistemi centralnega ogrevanjaCentral heating systemsICS:Ta slovenski standard je istoveten z:EN 14037-3:2003SIST EN 14037-3:2004en,fr,de01-januar-2004SIST EN 14037-3:2004SLOVENSKI
STANDARD
SIST EN 14037-3:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14037-3April 2003ICS 91.140.10English versionCeiling mounted radiant panels supplied with water attemperature below 120 °C - Part 3: Rating method andevaluation of radiant thermal outputPanneaux rayonnants de plafond alimentés en eau à unetempérature inférieure à 120 °C - Partie 3: Méthode deconversion de la puissance thermique et évaluation de lapuissance radiativeDeckenstrahlplatten für Wasser mit einer Temperatur unter120 °C - Teil 3: Wärmetechnische Umrechnungen,Bewertungsmethoden und Festlegung der Strahlungs-WärmeleistungThis European Standard was approved by CEN on 20 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14037-3:2003 ESIST EN 14037-3:2004
EN 14037-3:2003 (E)2ContentsPageForeword.3Introduction.41Scope.42Normative references.43Terms and definitions.44Testing of the mean surface temperature and the emissivity of the panel.45Thermal output conversion – Determination of the rated thermal output.66Evaluation of the thermal radiant output of a tested panel.6Annex A (normative)
Determination of the surface temperature - Test report.7Bibliography.8SIST EN 14037-3:2004
EN 14037-3:2003 (E)3ForewordThis document EN 14037-3:2003 has been prepared by Technical Committee CEN /TC 130, "Space heatingappliances without integral heat sources", the secretariat of which is held by UNI.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latestby October 2003.Annex A is normative.This document includes a Bibliography.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 14037-3:2004
EN 14037-3:2003 (E)4IntroductionThis European standard results from the recognition that the ceiling mounted radiant panels falling into the field ofapplication hereinafter stated, are traded on the basis of their thermal output. To evaluate and compare differentceiling mounted radiant panels it is therefore necessary to refer to a single stipulated value.This European Standard of ceiling mounted radiant panels consists of the following parts:¾ Part 1: Technical specifications and requirements¾ Part 2: Test method for thermal output¾ Part 3: Rating method and evaluation of radiant thermal output1 ScopeThis European Standard describes the procedure to determine the rated thermal output (FD) and the mean surfacetemperature (trp).Ceiling mounted radiant panels exchange heat mainly by radiation.The test methods for determining the thermal output of ceiling mounted radiant panels, as described in the part 2 ofthis European Standard, give reliable results for comparing different products, but these results understate theoutput obtained under real operating conditions.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublic
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.