kSIST FprEN 14037-3:2013

Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 3: Rating method and evaluation of radiant thermal output of ceiling mounted radiant panels

This European Standard describes the procedure to determine the rated thermal output (D) and the mean surface temperature (trp).

An der Decke frei abgehängte Heiz- und Kühlflächen für Wasser mit einer Temperatur unter 120°C - Teil 3: Wärmetechnische Umrechnungen, Bewertungsmethoden und Festlegung der Strahlungs-Wärmeleistung für Deckenstrahlplatten

Diese Europäische Norm legt das Verfahren zur Ermittlung der Nennwärmeleistung (D) und der mittleren Oberflächentemperatur (trp) fest.
Deckenstrahlplatten geben die Wärmeleistung überwiegend durch Strahlung ab.
Die Prüfverfahren zur Bestimmung der Wärmeleistung von Deckenstrahlplatten, wie in prEN 14037-2 beschrieben, geben zuverlässige Ergebnisse für den Vergleich verschiedener Produkte. Diese unterscheiden sich aber von den Werten unter den Betriebsbedingungen in der Anwendung.

Panneaux rayonnants de plafond alimentés en eau à une température inférieure à 120°C - Partie 3: Méthode de conversion de la puissance thermique et évaluation de la puissance thermique radiative

Stropne sevalne plošče za ogrevanje in hlajenje površin za vodo s temperaturo pod 120°C - 3. del: Metoda razvrščanja in vrednotenja sevalne toplotne moči stropnih sevalnih plošč

General Information

• Status: Not Published
• Public Enquiry End Date: 28-Feb-2012
• ICS: 91.140.10 - Central heating systems
• Technical Committee: OGS - Heating for buildings
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 27-Sep-2016
• Due Date: 02-Oct-2016
• Completion Date: 27-Sep-2016
• Ref Project: EN 14037-3:2013 - Free hanging heating and cooling surfaces for water with a temperature below 120 °C - Part 3: Rating method and evaluation of radiant thermal output of ceiling mounted radiant panels

Relations

• Revised: SIST EN 14037-3:2004 - Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 3: Rating method and evaluation of radiant thermal output
• Effective Date: 19-Jan-2023
• Revised: SIST EN 14037-3:2004 - Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 3: Rating method and evaluation of radiant thermal output
• Effective Date: 18-Jan-2023
• Revised: SIST EN 14037-3:2004 - Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 3: Rating method and evaluation of radiant thermal output
• Effective Date: 08-Jun-2022
• Revised: SIST EN 14037-3:2017 - Free hanging heating and cooling surfaces for water with a temperature below 120°C - Part 3: Prefabricated ceiling mounted radiant panels for space heating - Rating method and evaluation of radiant thermal output
• Effective Date: 01-Apr-2017
• Revised: SIST EN 14037-3:2004 - Ceiling mounted radiant panels supplied with water at temperature below 120 °C - Part 3: Rating method and evaluation of radiant thermal output
• Effective Date: 01-Feb-2017

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 14037-3:2012
01-januar-2012
6WURSQHVHYDOQHSORãþH]DRJUHYDQMHLQKODMHQMHSRYUãLQ]DYRGRVWHPSHUDWXUR
SRGƒ&GHO0HWRGDUD]YUãþDQMDLQYUHGQRWHQMDVHYDOQHWRSORWQHPRþL
VWURSQLKVHYDOQLKSORãþ
Free hanging heating and cooling surfaces for water with a temperature below 120°C -
Part 3: Rating method and evaluation of radiant thermal output of ceiling mounted radiant
panels
An der Decke frei abgehängte Heiz- und Kühlflächen für Wasser mit einer Temperatur
unter 120°C - Teil 3: Wärmetechnische Umrechnungen, Bewertungsmethoden und
Festlegung der Strahlungs-Wärmeleistung für Deckenstrahlplatten
Panneaux rayonnants de plafond alimentés en eau à une température inférieure à 120°C
- Partie 3: Méthode de conversion de la puissance thermique et évaluation de la
puissance thermique radiative
Ta slovenski standard je istoveten z: prEN 14037-3
ICS:
91.140.10 Sistemi centralnega Central heating systems
ogrevanja
oSIST prEN 14037-3:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 14037-3:2012
oSIST prEN 14037-3:2012
EUROPEAN STANDARD
DRAFT
prEN 14037-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2011
ICS 91.140.10 Will supersede EN 14037-3:2003
English Version
Free hanging heating and cooling surfaces for water with a
temperature below 120°C - Part 3: Rating method and
evaluation of radiant thermal output of ceiling mounted radiant
panels
Panneaux rayonnants de plafond alimentés en eau à une An der Decke frei abgehängte Heiz- und Kühlflächen für
température inférieure à 120 °C - Partie 3: Méthode de
Wasser mit einer Temperatur unter 120 °C - Teil 3:
conversion de la puissance thermique et évaluation de la Wärmetechnische Umrechnungen, Bewertungsmethoden
puissance thermique radiative und Festlegung der Strahlungs-Wärmeleistung für
Deckenstrahlplatten
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 130.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14037-3:2011: E
worldwide for CEN national Members.

oSIST prEN 14037-3:2012
prEN 14037-3:2011 (E)
Contents
Foreword . 3
Introduction . 4
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Testing of the mean surface temperature and the emissivity of the panel . 5
4.1 Determination of the mean surface temperature of the active length . 5
4.2 Determination of the emissivity . 6
5 Thermal output conversion – Determination of the rated thermal output . 6
6 Evaluation of the thermal radiant output of a tested panel . 6
Bibliography . 7

oSIST prEN 14037-3:2012
prEN 14037-3:2011 (E)
Foreword
This document (prEN 14037-3:2011) has been prepared by Technical Committee CEN/TC 130 “Space heating
appliances without integral heat sources”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 14037-3:2003.
The main changes are:
- the title has been changed,
- some editorial updates have been added.
oSIST prEN 14037-3:2012
prEN 14037-3:2011 (E)
Introduction
This European Standard results from the recognition that the ceiling mounted heating and cooling surfaces falling
into the field of application hereinafter stated are traded of the basis of their thermal and cooling output. For evalu-
ating and comparing different ceiling mounted radiant panels it is therefore necessary to refer to a single stipulated
value.
T
...