CEN/TC 139/WG 5 - Organic coatings on aluminium for architectural purposes
Standardization of the main characteristics of both liquid and powder stoved organic coatings as well as their resultant industrial finishes on aluminium alloys extrusions sheet and preformed sections for external architectural purposes including standardization of properties, test methods, minimum and process control (materials, applications and procedures).
Organic coatings on aluminium for architectural purposes
Standardization of the main characteristics of both liquid and powder stoved organic coatings as well as their resultant industrial finishes on aluminium alloys extrusions sheet and preformed sections for external architectural purposes including standardization of properties, test methods, minimum and process control (materials, applications and procedures).
General Information
This document specifies requirements and the corresponding methods of test relating to the organic coating of aluminium and aluminium alloy extrusions, sheet and preformed sections for architectural purposes, using coating powders. It also describes:
a) the pretreatment of the substrate prior to the coating process;
b) the coating powder;
c) the coating process;
d) the final product.
Each item is dealt with separately in this document so that any interested party can ensure compliance appropriate to its area of responsibility.
CAUTION - The procedures described in this standard are intended to be carried out by suitably trained and/or supervised personnel. The substances and procedures used in this method could be injurious to health if adequate precautions are not taken. Attention is drawn in the text to specific hazards. This document refers only to technical suitability and does not absolve the user from statutory obligations relating to health and safety.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This Part of EN 12206 specifies requirements and the corresponding methods of test relating to the organic coating of aluminium and aluminium alloy extrusions, sheet and preformed sections for architectural purposes, using exclusively coating powders. It also describes :
a) the pretreatment of the substrate prior to the coating process ;
b) the coating powder ;
c) the coating process ;
d) the final product.
Each item is dealt with separately in this Part of EN 12206 so that any interested party can ensure compliance appropriate to its area of responsibility.
CAUTION : The procedures describes in this standard are intended to be carried out by suitably trained and/or supervised personnel. The substances and procedures used in this method may be injurious to health if adequate precautions are not taken. Attention is drawn in the text to specific hazards. This standard refers only to its technical suitability and does not absolve the user from statutory obligations relating to health and safety.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard24 pagesGerman languagesale 10% offe-Library read for1 day