WG 12 - TC 23/WG 12
TC 23/WG 12
General Information
- Standard9 pagesEnglish and French languagesale 15% off
- Standard8 pagesEnglish and French languagesale 15% off
IEC TR 63044-2:2022(E) provides the environmental conditions for HBES/BACS devices, when declared in the manufacturer's documentation for use in one or more of the environment classes as defined in Clause 6 of this document.
- Technical report17 pagesEnglish languagesale 15% off
IEC 63044-4:2021 provides the functional safety requirements for HBES/BACS.
In addition, it defines functional safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
This document does not provide functional safety requirements for safety-related systems.
This document does not provide requirements on data protection and security.
- Standard62 pagesEnglish and French languagesale 15% off
IEC 63044-6:2021 specifies the requirements for planning and installation of HBES/BACS and the supporting infrastructure.
Radio frequency (RF) HBES/BACS are also considered.
Safety requirements are covered by IEC 60364 (all parts).
Information and communication technology (ICT) and broadcasting and communication technology (BCT) network installations are typically interfaced with HBES/BACS.
The requirements for ICT and BCT network installations are covered by ISO/IEC 14763-2.
This document does not cover HBES/BACS implementation with:
- optical fibre,
- power lines,
- power over Ethernet (PoE).
- Standard78 pagesEnglish and French languagesale 15% off
- Standard6 pagesEnglish languagesale 15% off
- Standard12 pagesEnglish and French languagesale 15% off
IEC 63044-5-2:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23.
This document specifies EMC requirements for HBES/BACS to be installed in residential, commercial and light-industrial environments, according to the definition given in IEC 61000-6-1.
This document is applicable (but not limited) to
operator stations and other human–system interface devices,
devices for management functions,
control devices, automation stations and application-specific controllers,
field devices and their interfaces,
cabling and interconnection of devices,
used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.
- Standard56 pagesEnglish and French languagesale 15% off
- Standard25 pagesEnglish and French languagesale 15% off
IEC 63044-5-1:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23.
This document provides general performance requirements and test set-ups. This document is applicable (but not limited) to
operator stations and other human–system interface devices,
devices for management functions,
control devices, automation stations and application-specific controllers,
field devices and their interfaces,
cabling and interconnection of devices,
used within a dedicated HBES/BACS network.
- Standard75 pagesEnglish and French languagesale 15% off
- Standard40 pagesEnglish and French languagesale 15% off
IEC 63044-1:2017 applies to all Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) and specifies the general requirements for these systems and products. This document is applicable (but not limited) to
operator stations and other human–system interface devices,
devices for management functions,
control devices, automation stations and application specific controllers,
field devices and their interfaces, and
cabling and interconnection of devices
used within a dedicated HBES/BACS network. This document provides an overview of the IEC 63044 series. To enable integration of a wide spectrum of applications, the IEC 63044 series covers
electrical safety,
functional safety,
environmental conditions,
EMC requirements, and
installation and cabling rules and topologies.
IEC 63044 is a series of product family standards.
- Standard20 pagesEnglish languagesale 15% off
- Standard39 pagesEnglish and French languagesale 15% off
- Standard21 pagesEnglish and French languagesale 15% off
IEC 63044-5-3:2017 is a product family standard that sets the minimum level of EMC performance for the HBES/BACS network in addition to the product EMC standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product EMC standard exists. In addition, it defines EMC requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
NOTE An example of other networks is a dedicated ICT network covered by CISPR 22 and 23.
This document specifies EMC requirements for HBES/BACS to be installed in industrial environments, according to the definition given in IEC 61000-6-2.
NOTE Industrial environment covers the office spaces that may be present in industrial premises. Industrial automation systems are outside the scope. This document is applicable (but not limited) to
operator stations and other human–system interface devices,
devices for management functions,
control devices, automation stations and application-specific controllers,
field devices and their interfaces,
cabling and interconnection of devices,
used within a dedicated HBES/BACS network. This publication is to be read in conjunction with IEC 63044-5-1:2017.
- Standard32 pagesEnglish and French languagesale 15% off
- Standard16 pagesEnglish and French languagesale 15% off
IEC 63044-3:2017 provides the electrical safety requirements related to the HBES/BACS network in addition to the product safety standards for HBES/BACS devices. It also applies to devices used within an HBES/BACS network for which no specific HBES/BACS product safety standard exists. In addition, it defines safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks.
NOTE An example of other networks is a dedicated ICT network covered by IEC 62949. This document is applicable to
operator stations and other human–system interface devices,
devices for management functions,
control devices, automation stations and application-specific controllers,
field devices and their interfaces, and
cabling and interconnection of devices
used within a dedicated HBES/BACS network. This document covers the following requirements and compliance criteria:
protection from hazards in the device;
protection from overvoltages on the network;
protection from touch current;
protection from hazards caused by different types of circuit;
protection of the communication wiring from overheating caused by excessive current.
- Standard36 pagesEnglish languagesale 15% off
- Standard38 pagesEnglish and French languagesale 15% off