ISO/TC 180/SC 4 - Systems - Thermal performance, reliability and durability

This document specifies two procedures to check the performance of solar thermal collector fields. This document is applicable to glazed flat plate collectors, evacuated tube collectors and/or tracking, concentrating collectors used as collectors in fields. The check can be done on the thermal power output of the collector field and also be on the daily yield of the collector field. The document specifies for the two procedures how to compare a measured output with a calculated one. The document applies for all sizes of collector fields.

ISO 9459-4:2013 specifies a method of evaluating the annual energy performance of solar water heaters using a combination of test results for component performance and a mathematical model to determine an annual load cycle task performance under specified weather and load conditions. The procedure is applicable to solar water heaters with integral backup or preheating into a conventional storage or instantaneous water heater and to integral collector storage water heaters. System operating requirements specified in ISO 9459-4:2013 are for the purpose of determining an annual performance rating for domestic water heaters. There are no product design or operation requirements in ISO 9459-4:2013.

ISO 9459-5:2007 specifies a method for outdoor laboratory testing of solar domestic hot-water (SDHW) systems. The method may also be applied for in-situ tests, and also for indoor tests by specifying appropriate draw-off profiles and irradiance profiles for indoor measurements. The system performance is characterized by means of whole-system tests using a 'black-box' approach, i.e. no measurements on the system components or inside the system are necessary. Detailed instructions are given on the measurement procedure, on processing and analysis of the measurement data, and on presentation of the test report.

Describes test procedures for characterizing the performance of solar domestic water heating systems operated without auxiliary boosting and for predicting annual performance in any given climatic and operating conditions.Suitable for testing all types of systems including forced circulation, thermosiphon, freon-charged collektor systems.

Establishes a uniform indoor test method for rating solar domestic water heating systems for thermal performance. Applies only to solar water heating systems designed solely to heat potable water to be supplied for domestic water usage. The test procedures described are applicable to systems of solar storage capacity of 0,6 m^3 or less.

Gives test procedures for characterizing the performance of solar domestic water heating systems and for predicting annual performance under climatic conditions. Applies to solar domestic water heating systems designed to heat potable water. It is not applicable to concentrating systems.

Replaces the equation in note 6.

Gives recommendations for the design, installation and commissioning of solar heating systems for swimming pools, using direct circulation of pool water to the solar collectors. Does not include electrical safety requirements and does not deal with the pool filtration systems.