LII - Wood and wooden products

This European  Standard specifies how bending properties can be described and used to identify structural plywood. These bending properties are derived from medium sized test pieces in accordance with EN 789 and EN 1058. Note: A standard "Wood-based panels - Characteristic values for established products" isin course of preparation.

This European standard specifies a method for the determination of the resistance of fibreboards to axial withdrawal of screws.

This European Standard for cement-bonded particleboards specifies the requirements for particleboards bonded with Ordinary Portland Cement (OPC) for use in dry, humid and exterior conditions. Additional information on supplementary properties for certain applications is also given.

This European Standard specifies the requirements for softboards according to EN 316, with a density of more than 230 kg/m3.  The values listed in this standard relate to product properties but they are not characteristic values to be used in design calculations.

This European Standard gives definitions, a classification and specifies the requirements for Oriented Strand Boards (OSB). The values listed in this standard relate to product properties but they are not characteristic values to be used in design calculations. Note: Test methods for the determination of mechanical properties for structural purposes are given in EN 789. Determinationof characteristic values of mechanical properties and density for structural purposes is given in EN 1058. Information on supplementary properties is given in annex C.

This European Standard gives a definition and a classification for particleboards

This European standard specifies methods for determining the bonding quality of veneer plywood by shear testing. The relevant requirements are specified in EN 314-2.

This European Standard specifies the requirements for hardboards as defined in EN 316.  The values listed in this standard relate to product properties but they are not characteristic values to be used in design calculation.

This European Standard specifies the requirements for medium boards according to EN 316.  The values listed in this standard relate to product properties but they are not characteristic values to be used in design calculations.

This European Standard specifies the requirements for some properties which are common for all uncoated fibreboard types according to EN 316.

This European Standard specifies the requirements for heavy duty load-bearing boards for use in humid conditions. Note: These boards are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see ENV 1995-1-1 and/or performance standards). The values listed in this standard relate to product properties but they are not characteristic values to be used in design calculation. Additional information on supplementary properties for certain applications is also given. Particleboards in accordance with this standard may be referred to as P7-boards.

This European Standard specifies the requirements for load-bearing boards for use in humid conditions. Note: These boards are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing or I-beams (see ENV 1995-1-1 and/or performance standards). The values listed in this standard relate to product properties but they are not characteristic values to be used in design calculations. Additional information on supplementary properties for certain applications is also given. Particleboards in accordance with this standard may be referred to as P5-boards.

This European Standard specifies the requirements for general purpose boards foruse in dry contitions. Additional information on supplementary properties for certain applications is also given. Particleboards in accordance with this standard may be referred to as P2-boards. This standard does not give requirements for Oriented Strand Boards (OSB); these are set out in EN 300. This standard does not apply to extruded particleboards.

This European Standard specifies the requirements for boards for interior fitments (including furniture) for use in dry conditions. Additional information on supplementary properties for certain applications is also given. Particleboards in accordance with this standard may be referred to as P3-boards. This standard does not give requirements for Oriented Strand Boards (OSB); these are set out in EN 300. This standard does not apply to extruded particleboards.

This European standard specifies basic requirements for plywood for use in humid conditions. Information on additional properties for certain applications is also given.

This European Standard specifies basic requirements for plywood for use in exterior conditions. Additional information on supplementary properties for cer-tain applications is also given.

This European standard specifies the requirements for load-bearing boards for use in dry conditions. NOTE: These boards are intended for use in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing, and I-beams (see EN V 1995-1-1 and/or performance standards).

This European Standard specifies the requirements for some properties, which are common for all types of uncoated particleboards according to EN 312 parts 2 to 7.

This European standard specifies basic requirements for plywood for use in dry conditions. Information on additional properties for certain applications is also given.

This European Standard specifies the requirements for heavy duty load-bearing boards for use in dry conditions. NOTE: These boards have enhanced properties with those specified in EN 312-4. They may also be used in design and construction of load-bearing or stiffening building elements, e.g. walls, flooring, roofing and I-beams (see EN V 1995-1-1 and/or performance standards).

This European Standard defines tolerances for dimensions of plywood panels (lenght, width,thickness) and tolerances for squareness and edge straightness.

This European standard specifies a method for the determination of dimensional changes in fibreboards, due to climatic variations.

This European standard is one of a series defining methods for the determination of the behaviour of a panel under the influence of moisture. This standard defines a cyclic test in humid conditions and is applicable to fibreboards.

This European Standard specifies a method of assessing the surface soundness of uncoated particleboards.

This European Standard defines the principal terms concerning plywood.

This European standard gives the definition, classification and symbols for wood fibreboards

This European Standard gives a classification of plywood panels.