Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC 62841-3-9:2020)

This part of IEC 62841 applies to transportable mitre saws intended to be used with a
toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals
except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might
simply be referred to as saw or tool.
This International Standard does not apply to mitre saws intended to cut other metals, such
as magnesium, steel and iron. This document does not apply to mitre saws with an automatic
feeding device.
NOTE 101 Transportable saws intended to cut ferrous metals will be covered by a future part of IEC 62841-3.
This document does not apply to saws designed for use with abrasive wheels.
NOTE 102 Transportable tools designed for use with abrasive wheels are covered by IEC 62841-3-10.
This document does not apply to tools combining the function of a mitre saw with the function
of a table saw.
NOTE 103 Transportable tools combining the function of a mitre saw with the function of a table saw are
covered by a future part of IEC 62841-3.

Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-9: Besondere Anforderungen für transportable Gehrungskappsägen (IEC 62841-3-9:2020)

Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses - Sécurité - Partie 3-9: Exigences particulières pour les scies à onglets transportables (IEC 62841-3-9:2020)

IEC 62841-3-9:2020 est disponible sous forme de IEC 62841-3-9:2020 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 62841-3-9:2020 s'applique aux scies à onglets transportables destinées à être utilisées avec une lame de scie dentée pour la coupe du bois et de matériaux analogues, de plastiques et de métaux non ferreux à l'exception du magnésium, la lame de scie ayant un diamètre ne dépassant pas 410 mm, celle-ci pouvant être simplement désignée ci-après comme scie ou outil. La présente Norme internationale ne s'applique pas aux scies à onglets utilisées pour couper d'autres métaux, tels que le magnésium, l'acier et le fer. Le présent document ne s'applique pas aux scies à onglets équipées d'un appareil d'alimentation automatique. Les scies transportables destinées à couper des métaux ferreux seront couvertes par une future partie de l’IEC 62841-3. Le présent document ne s'applique pas aux scies destinées à être utilisées avec un disque abrasif. Les outils portables conçus pour être utilisés avec un disque abrasif sont couverts par l’IEC 62841-3-10. Le présent document ne s'applique pas aux outils qui combinent la fonction de scie à onglets et la fonction de scie circulaire à table. Les outils portables qui combinent la fonction de scie à onglets et la fonction de scie circulaire à table sont couverts par une future partie de l’IEC 62841-3. Cette deuxième édition annule et remplace la première édition parue en 2014. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- Article 1: Domaine d'application: augmentation du diamètre maximal de la lame de scie à 410 mm;
- Le Corrigendum 1 et le Corrigendum 2 de la première édition ont été incorporés dans la présente deuxième édition.
La présente Partie 3-9 doit être utilisée conjointement avec l’IEC 62841-1:2014.
Mots-clés: outils portables, scies à onglets transportables

Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-9. del: Posebne zahteve za prenosne zajeralne žage (IEC 62841-3-9:2020)

General Information

Status
Published
Publication Date
08-Jul-2020
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jul-2020
Due Date
05-Sep-2020
Completion Date
09-Jul-2020

Relations

Buy Standard

Standard
EN IEC 62841-3-9:2020 - BARVE
English language
38 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62841-3-9:2020
01-september-2020
Nadomešča:
SIST EN 62841-3-9:2016
SIST EN 62841-3-9:2016/A11:2018
SIST EN 62841-3-9:2016/AC:2016
Elektromotorna ročna orodja, prenosna orodja ter stroji za trato in vrt - Varnost - 3-
9. del: Posebne zahteve za prenosne zajeralne žage (IEC 62841-3-9:2020)
Electric motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws (IEC
62841-3-9:2020)
Elektrische motorbetriebene handgeführte Werkzeuge, transportable Werkzeuge und
Rasen- und Gartenmaschinen - Sicherheit - Teil 3-9: Besondere Anforderungen für
transportable Gehrungskappsägen (IEC 62841-3-9:2020)
Outils électroportatifs à moteur, outils portables et machines pour jardins et pelouses -
Sécurité - Partie 3-9: Exigences particulières pour les scies à onglets transportables (IEC
62841-3-9:2020)
Ta slovenski standard je istoveten z: EN IEC 62841-3-9:2020
ICS:
25.080.60 Strojne žage Sawing machines
25.140.20 Električna orodja Electric tools
SIST EN IEC 62841-3-9:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62841-3-9:2020

---------------------- Page: 2 ----------------------
SIST EN IEC 62841-3-9:2020


EUROPEAN STANDARD EN IEC 62841-3-9

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2020
ICS 25.140.20 Supersedes EN 62841-3-9:2015 and all of its
amendments and corrigenda (if any)
English Version
Electric motor-operated hand-held tools, transportable tools and
lawn and garden machinery - Safety - Part 3-9: Particular
requirements for transportable mitre saws
(IEC 62841-3-9:2020)
Outils électroportatifs à moteur, outils portables et machines Elektrische motorbetriebene handgeführte Werkzeuge,
pour jardins et pelouses - Sécurité - Partie 3-9: Exigences transportable Werkzeuge und Rasen- und
particulières pour les scies à onglets transportables Gartenmaschinen - Sicherheit - Teil 3-9: Besondere
(IEC 62841-3-9:2020) Anforderungen für transportable Gehrungskappsägen
(IEC 62841-3-9:2020)
This European Standard was approved by CENELEC on 2020-03-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62841-3-9:2020 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62841-3-9:2020
EN IEC 62841-3-9:2020 (E)
European foreword
The text of document 116/430/FDIS, future edition 2 of IEC 62841-3-9, prepared by IEC/TC 116
"Safety of motor-operated electric tools" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62841-3-9:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-04-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-04-20
document have to be withdrawn

This document supersedes EN 62841-3-9:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of
EN IEC 62841-3-9:2020/A11:2020.
Endorsement notice
The text of the International Standard IEC 62841-3-9:2020 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62841-3-10 NOTE Harmonized as EN 62841-3-10

2

---------------------- Page: 4 ----------------------
SIST EN IEC 62841-3-9:2020




IEC 62841-3-9

®


Edition 2.0 2020-02




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE
colour

inside










Electric motor-operated hand-held tools, transportable tools and lawn

and garden machinery – Safety –

Part 3-9: Particular requirements for transportable mitre saws




Outils électroportatifs a moteur, outils portables et machines pour jardins

et pelouses – Sécurité –


Partie 3-9: Exigences particulières pour les scies à onglets transportables













INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE


INTERNATIONALE




ICS 25.140.20 ISBN 978-2-8322-7801-7




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------
SIST EN IEC 62841-3-9:2020
– 2 – IEC 62841-3-9:2020 © IEC 2020
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 General requirements . 11
5 General conditions for the tests . 11
6 Radiation, toxicity and similar hazards . 11
7 Classification . 11
8 Marking and instructions . 11
9 Protection against access to live parts . 14
10 Starting . 14
11 Input and current . 14
12 Heating . 15
13 Resistance to heat and fire . 15
14 Moisture resistance . 15
15 Resistance to rusting . 15
16 Overload protection of transformers and associated circuits . 15
17 Endurance . 15
18 Abnormal operation . 15
19 Mechanical hazards . 16
20 Mechanical strength . 22
21 Construction . 24
22 Internal wiring . 31
23 Components . 31
24 Supply connection and external flexible cords . 31
25 Terminals for external conductors . 32
26 Provision for earthing . 32
27 Screws and connections . 32
28 Creepage distances, clearances and distances through insulation . 32
Annexes . 33
Annex I (informative) Measurement of noise and vibration emissions . 33
Annex K (normative) Battery tools and battery packs . 34
Annex L (normative) Battery tools and battery packs provided with mains connection
or non-isolated sources . 35
Bibliography . 36

Figure 101 – Mitre saw with centre workpiece support . 7
Figure 102 – Mitre saw . 9
Figure 103 – Saw blade quadrants . 10
Figure 104 – Open guard construction . 18
Figure 105 – Position of saw blade and lower guard relative to saw table . 19

---------------------- Page: 6 ----------------------
SIST EN IEC 62841-3-9:2020
IEC 62841-3-9:2020 © IEC 2020 – 3 –
Figure 106 – Test probe . 20
Figure 107 – Application of test probe . 20
Figure 108 – Workpiece support dimensions . 26
Figure 109 – Minimum extension of fence . 28
Figure 110 – Distance between fence and saw blade . 29
Figure 111 – Flange characteristics . 31

Table 4 – Required performance levels . 15
Table I.101 – Noise test conditions for mitre saws . 33

---------------------- Page: 7 ----------------------
SIST EN IEC 62841-3-9:2020
– 4 – IEC 62841-3-9:2020 © IEC 2020
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS,
TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY –
SAFETY –

Part 3-9: Particular requirements for transportable mitre saws

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62841-3-9 has been prepared by IEC technical committee 116:
Safety of motor-operated electric tools.
This second edition cancels and replaces the first edition published in 2014. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) Clause 1: Scope: increase of the maximum saw blade diameter to 410 mm;
b) Corrigendum 1 and Corrigendum 2 of the first edition have been incorporated in this
second edition.

---------------------- Page: 8 ----------------------
SIST EN IEC 62841-3-9:2020
IEC 62841-3-9:2020 © IEC 2020 – 5 –
The text of this International Standard is based on the following documents:
FDIS Report on voting
116/430/FDIS 116/442/RVD

Full information on the voting for the approval of this International Standard can be found in
the report on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This Part 3-9 is to be used in conjunction with the IEC 62841-1:2014.
This Part 3-9 supplements or modifies the corresponding clauses in IEC 62841-1, so as to
convert it into the IEC Standard: Particular requirements for transportable mitre saws.
Where a particular subclause of Part 1 is not mentioned in this Part 3-9, that subclause
applies as far as reasonable. Where this standard states “addition”, “modification” or
“replacement”, the relevant text in Part 1 is to be adapted accordingly.
The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
The terms defined in Clause 3 are printed in bold typeface.
Subclauses, notes and figures which are additional to those in Part 1 are numbered starting
from 101.
A list of all parts of the IEC 62841 series, under the general title: Electric motor-operated
hand-held tools, transportable tools and lawn and garden machinery – Safety, can be found
on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing
organizations may need a transitional period following publication of a new, amended or revised IEC publication in
which to make products in accordance with the new requirements and to equip themselves for conducting new or
revised tests.
It is the recommendation of the committee that the content of this publication be adopted for implementation
nationally not earlier than 36 months from the date of publication.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.

---------------------- Page: 9 ----------------------
SIST EN IEC 62841-3-9:2020
– 6 – IEC 62841-3-9:2020 © IEC 2020
ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS,
TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY –
SAFETY –

Part 3-9: Particular requirements for transportable mitre saws



1 Scope
This clause of Part 1 is applicable, except as follows:
Addition:
This part of IEC 62841 applies to transportable mitre saws intended to be used with a
toothed saw blade for cutting wood and analogous materials, plastics and nonferrous metals
except magnesium with a saw blade diameter not exceeding 410 mm, which hereinafter might
simply be referred to as saw or tool.
This International Standard does not apply to mitre saws intended to cut other metals, such
as magnesium, steel and iron. This document does not apply to mitre saws with an automatic
feeding device.
NOTE 101 Transportable saws intended to cut ferrous metals will be covered by a future part of IEC 62841-3.
This document does not apply to saws designed for use with abrasive wheels.
NOTE 102 Transportable tools designed for use with abrasive wheels are covered by IEC 62841-3-10.
This document does not apply to tools combining the function of a mitre saw with the function
of a table saw.
NOTE 103 Transportable tools combining the function of a mitre saw with the function of a table saw are
covered by a future part of IEC 62841-3.
2 Normative references
This clause of Part 1 is applicable, except as follows:
Addition:
ISO 180, Plastics – Determination of Izod impact strength
3 Terms and definitions
This clause of Part 1 is applicable, except as follows:
3.101
bevel angle
angular displacement of the saw blade plane with respect to the table top plane, the position
of the saw blade plane that is perpendicular to the table top being the 0° bevel position
3.102
compound angle
angular displacement of the saw blade plane having a bevel and mitre angle other than 0°

---------------------- Page: 10 ----------------------
SIST EN IEC 62841-3-9:2020
IEC 62841-3-9:2020 © IEC 2020 – 7 –
3.103
cutting edge zone
outer 20 % of the radius of the saw blade
3.104
D
specified diameter of the saw blade
3.105
fence
device to position the workpiece and absorb the horizontal forces from the saw blade during
the cutting process
3.105.1
centre workpiece support
device that has a face supporting the workpiece in conjunction with the fence
Note 1 to entry: See Figure 101.

Key
1 saw blade
2 fences
3 centre workpiece support
Figure 101 – Mitre saw with centre workpiece support
3.106
fully down position
position of the saw unit after adjustment of the saw in accordance with 8.14.2 a) 107) and
any depth-of-cut stop as in 8.14.2 a) 108) disengaged or adjusted in order to produce the
lowest position of the saw unit

---------------------- Page: 11 ----------------------
SIST EN IEC 62841-3-9:2020
– 8 – IEC 62841-3-9:2020 © IEC 2020
3.107
horizontal cutting capacity
largest dimension perpendicular from the plane of the fence (width) of a workpiece with
rectangular cross section that can be completely cut through with a single pass of the saw
blade
Note 1 to entry: Subclause 5.101 provides a measurement procedure for horizontal cutting capacity.
3.108
kerf width
distance between two parallel planes that are touching the opposing sides of at least three
saw blade tooth tips
3.109
kerf plate
portion of the table top on both sides of the saw blade intersect line with the table top for the
purpose of minimizing the tearing of the wood fibres by the saw blade
Note 1 to entry: Depending on the design, the kerf plate is adjustable, replaceable or an integral part of the table
top.
3.110
mitre angle
angular displacement of the plane of the fence with respect to the cutting line, the position of
the saw blade plane that is perpendicular to the plane of the fence being the 0° mitre position
3.111
mitre saw
saw consisting of a table top and a fence which support and position the workpiece, and a
saw unit, projecting over the table top
Note 1 to entry: Cutting is achieved by moving the saw unit through a plunging action or a combination of
plunging and sliding actions. The workpiece does not move with respect to the table top or fence during cutting.
The saw unit can be adjustable to cut at a bevel angle, a mitre angle or both angles to create a compound angle
cut. See Figure 102.

---------------------- Page: 12 ----------------------
SIST EN IEC 62841-3-9:2020
IEC 62841-3-9:2020 © IEC 2020 – 9 –


Key
1 fence
2 upper guard
3 lower guard
4 table base
5 turn table
Figure 102 – Mitre saw
3.112
quadrants
with the saw unit in the fully down position, parts of the saw blade defined by two lines
intersecting the centre of the saw blade, where one line is parallel to the table top and the
other line is perpendicular to the first line
Note 1 to entry: The quadrants remain fixed in relation to the saw unit as it moves between the rest position
and the fully down position (see Figure 103):
– quadrant “A” is above the line parallel to the table top and away from the operator’s position;
– quadrant “B” is above the line parallel to the table top and closer to the operator’s position;
– quadrant “C” is below the line parallel to the table top and closer to the operator’s position;
– quadrant “D” is below the line parallel to the table top and away from the operator’s position.

---------------------- Page: 13 ----------------------
SIST EN IEC 62841-3-9:2020
– 10 – IEC 62841-3-9:2020 © IEC 2020

a) Saw unit in fully down position

b) Saw unit in rest position
Figure 103 – Saw blade quadrants
3.113
rest position
position of a saw unit in its uppermost position from the table top and, for mitre saws with a
sliding action, at the maximum sliding position towards the fence
3.114
saw unit
device with an affixed saw blade, capable of performing a cutting action
3.115
table top
horizontal surface that is in contact with and supports the workpiece and typically consists of
a turn table, a table base on each side of the turn table and workpiece support extension(s)
Note 1 to entry: See Figure 102.
3.116
turn table
workpiece supporting device that facilitates the mitre angle adjustment
3.117
vertical cutting capacity
largest height dimension above the table top (thickness) of a workpiece with rectangular
cross section having a width dimension equal to the horizontal cutting capacity, that can be
completely cut through with a single pass of the saw blade

---------------------- Page: 14 ----------------------
SIST EN IEC 62841-3-9:2020
IEC 62841-3-9:2020 © IEC 2020 – 11 –
4 General requirements
This clause of Part 1 is applicable, except as follows:
4.101 Throughout the remaining part of this document, unless otherwise explicitly stated,
whenever a requirement or a reference is made to
– “saw blade”:
this shall equally apply to any “saw blade” as specified in accordance with 8.14.2 a);
– “force” as a multiple of D:
the force shall be expressed in newtons (N) and the saw blade diameter D shall be
expressed in millimetres (mm).
5 General conditions for the tests
This clause of Part 1 is applicable, except as follows:
5.17 Addition:
The mass of the tool shall include the fences and required workpiece clamp(s) in accordance
with 21.103 and 21.104. Further parts such as carrying means that are required in accordance
with the instructions for the safe use of the tool shall be included in the mass.
5.101 Procedure to determine the horizontal cutting capacity
The mitre saw is fitted with a (2 ± 0,2) mm thick steel disc of diameter D in place of the saw
blade and is set to 0° bevel angle. The saw unit is at its fully down position and, for a
mitre saw with a sliding function, the saw unit is at its maximum extended horizontal position
from the fence. The mitre saw is set for the mitre angle for which the horizontal cutting
capacity measurement is desired.
Horizontal cutting capacity:
The horizontal cutting capacity is the perpendicular distance measured in the plane of the
table top from the fence to the intersect point of the steel disc periphery in quadrant “C” with
the plane of the table top.
6 Radiation, toxicity and similar hazards
This clause of Part 1 is applicable.
7 Classification
This clause of Part 1 is applicable.
8 Marking and instructions
This clause of Part 1 is applicable, except as follows:
8.1 Addition:
Mitre saws shall be marked with:
– rated no-load speed of the output spindle.

---------------------- Page: 15 ----------------------
SIST EN IEC 62841-3-9:2020
– 12 – IEC 62841-3-9:2020 © IEC 2020
8.3 Addition:
Mitre saws shall be marked with the saw blade diameter(s). The marked value(s) shall not be
larger than D and shall not be less than 0,96 D.
Mitre saws shall be marked with the direction of rotation of the spindle, indicated in a visible
location on the tool in the vicinity of the saw blade, such as on the saw blade guard, by an
arrow raised or recessed or by any other means no less visible and indelible.
The table top on each side of the saw blade shall be marked with a sign as follows:

This symbol needs not be in accordance with the colour requirements of ISO 3864-2.
8.14.1 Addition:
The additional safety instructions as specified in 8.14.1.101 shall be given. This part may be
printed separately from the “General Power Tool Safety Warnings”.
8.14.1.101 Safety instructions for mitre saws
a) Mitre saws are intended to cut wood or wood-like products, they cannot be used
with abrasive cut-off wheels for cutting ferrous material such as bars, rods, studs,
etc. Abrasive dust causes moving parts such as the lower guard to jam. Sparks from
abrasive cutting will burn the lower guard, the kerf insert and other plastic parts.
b) Use clamps to support the workpiece whenever possible. If supporting the
workpiece by hand, you must always keep your hand at least 100 mm from either
side of the saw blade. Do not use this saw to cut pieces that are too small to be
securely clamped or held by hand. If your hand is placed too close to the saw blade,
there is an increased risk of injury from blade contact.
c) The workpiece must be stationary and clamped or held against both the fence and
the table. Do not feed the workpiece into the
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.