43.060.50 - Electrical and electronic equipment. Control systems

This document specifies measurement methods for the drive monitoring system that is
specified in IEC TS 63033-1:2017.

This document provides human machine interface (HMI) design specifications for keyless ignition systems that use key code carrying device for passenger cars (including sport utility vehicles and light trucks) and commercial vehicles (including heavy trucks and buses), independent of vehicle propulsion system. HMI specifications for the electrical key functions include actuation in normal conditions, emergencies, low battery, and avoidance of inadvertent actuations, alerts and specific non-standa...view more

This part of IEC 63033 specifies recording methods of the drive monitoring system that is
specified in IEC TS 63033-1 in order to view the recorded video file with free eye point
technology.

This document defines the durability test methods of a starter relay for passenger vehicles (12 V) with a stop and start system. It uses a simulated electrical load to represent the starter solenoid.

This document defines requirements and recommendations for starter motor durability testing of 12 V start systems for internal combustion engines. This includes test methods, test procedures and capabilities of test benches.

ISO 17447-1:2015 specifies the main properties and dimensions of metal-sheath-type glow-plugs, including the terminals and the dimensions of their cylinder head housings, for use with diesel (compression ignition) engines.

ISO 17447-2:2015 specifies the main properties and dimensions of ceramic-sheath-type glow-plugs, including the terminals and the dimensions of their cylinder head housings, for use with diesel (compression ignition) engines.

ISO 17447-3:2015 specifies general requirements and test methods for sheath-type glow-plugs. Detailed test condition(s) and/or requirement(s) are agreed between the glow-plug manufacturers and the engine manufacturer. It is applicable to glow-plugs conforming to ISO 17447‑1 and ISO 17447‑2, used in diesel (compression ignition) engines.

ISO 8856:2014 lays down test methods and general requirements for the determination of the electrical characteristics of DC starter motors intended to start internal combustion engines of road vehicles.

ISO 28741:2013 specifies the main properties and dimensions of spark-plugs, including the terminals and the dimensions of their cylinder head housings, for use with spark-ignition engines. ISO 28741:2013 does not cover screened and waterproof spark-plugs.

IEC/TR 62343-6-2:2013(E) clarifies dynamic module interfaces, which should be standardized, based on the surveys. Annex A is a summary of survey responses by region and Annex B provides survey results specific to the optical channel monitor (OCM). The object of this technical report is to propose a software and hardware interface standard of dynamic modules. The dynamic modules addressed are defined in the IEC 62343 series. This second edition cancels and replaces the first edition published in ...view more

ISO 8854:2012 specifies test methods and general requirements for the determination of the electrical characteristic data of alternators for road vehicles. It applies to alternators, cooled according to the supplier's instructions, mounted on internal combustion engines.

ISO 11565:2006 specifies the test methods and requirements for the mechanical and electrical performance of spark-plugs for use with spark ignition engines.

ISO 6856:2005 specifies test methods and general requirements for unscreened high-voltage ignition cable assemblies, and is applicable to all such assemblies used in road vehicle applications.

ISO 3808 specifies the classes, types and dimensions of, and test methods and requirements for, the unscreened high-voltage ignition cables used in spark-ignited engines for road vehicles.

Scope This part of ISO 11748 provides an application example of the guidelines and specifications for technical documentation given in ISO 11748-1 and ISO 11748-2. The example is based on the standard generalized markup language (SGML), which is specified in ISO 8879.

This Technical Report describes the heat-rating methods of spark-plugs used with spark-ignition engines.

This part of ISO 11748 gives guidelines for the content and structure of technical documentation for on-board electronic control systems used in road vehicles. It provides a checklist of technical data elements to be considered when creating technical documentation. The actual set of technical data elements to be exchanged between project partners is settled by the documentation agreement described in ISO 11748-2. Any decision on which information is relevant, mandatory or optional will be speci...view more