Agricultural and forestry machinery - Inspection of sprayers and liquid fertilizer distributors in use - Part 1: General (ISO/DIS 16122-1:2011)

This International Standard applies to all types of machinery for pesticide application applicators used in agriculture, horticulture, forestry and other areas.
ISO 16122 specifies the requirements and test methods for the inspection of machines in use.
It relates mainly to the condition of the machine with respect to its potential risk for the environment and its performance to achieve a good application.
This part of ISO 16122 defines the general requirements to be fulfilled. The specific requirements to the different types of machines are defined in the relevant specific parts. The scope of each specific part is defined in Annex A, normative.
It also includes minimum safety requirements dealing with the operator’s safety during inspection.

Land- und Forstmaschinen - Kontrolle von in Gebrauch befindlichen Pflanzenschutzgeräten zum Ausbringen von Pflanzenschutzmitteln und flüssigen Düngemitteln - Teil 1: Allgemeines (ISO/DIS 16122-1:2011)

Diese Internationale Norm gilt für alle Arten von Pflanzenschutzgeräten zum Ausbringen von Pflanzenschutzmitteln
und flüssigen Düngemitteln, die in der Landwirtschaft, dem Gartenbau, der Forstwirtschaft und anderen
Bereichen verwendet werden. Diese werden im vorliegenden Teil als „Geräte“ bezeichnet.
ISO 16122 legt die Anforderungen und Prüfverfahren für die Sichtkontrolle von in Gebrauch befindlichen Geräten
fest.
Dieser Teil legt auch Mindestanforderungen an die Vorbereitung des Gerätes für die Prüfung fest.
Dieser Teil befasst sich in erster Linie mit dem Gerätezustand hinsichtlich des potenziellen Risikos für die
Umwelt und der Funktionsfähigkeit zum Erzielen einer anwendungsgerechten Leistung.
Dieser Teil von ISO 16122 legt die zu erfüllenden allgemeinen Anforderungen fest. Die besonderen Anforderungen
an die verschiedenen Gerätearten sind in den entsprechenden besonderen Teilen festgelegt. Der Anwendungsbereich
jedes besonderen Teils ist in Anhang A festgelegt.
Dieser Teil enthält auch Mindestanforderungen hinsichtlich der Sicherheit des Prüfpersonals (ausführender
Prüfer) während der Gerätekontrolle.

Matériel agricole et forestier - Contrôle des pulvérisateurs et distributeurs d'engrais liquides en service - Partie 1: Généralités (ISO/DIS 16122-1:2011)

Kmetijski in gozdarski stroji - Kontrola pršilnikov in škropilnikov tekočih gnojil v uporabi - 1. del: Splošno (ISO/DIS 16122-1:2011)

General Information

Status
Not Published
Public Enquiry End Date
24-Sep-2011
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
29-Oct-2013
Due Date
03-Nov-2013
Completion Date
29-Oct-2013

Buy Standard

Draft
prEN ISO 16122-1:2011
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16122-1:2011
01-september-2011
.PHWLMVNLLQJR]GDUVNLVWURML.RQWURODSUãLOQLNRYLQãNURSLOQLNRYWHNRþLKJQRMLOY
XSRUDELGHO6SORãQR ,62',6
Agricultural and forestry machinery - Inspection of sprayers and liquid fertilizer
distributors in use - Part 1: General (ISO/DIS 16122-1:2011)
Land- und Forstmaschinen - Kontrolle von in Gebrauch befindlichen
Pflanzenschutzgeräten zum Ausbringen von Pflanzenschutzmitteln und flüssigen
Düngemitteln - Teil 1: Allgemeines (ISO/DIS 16122-1:2011)
Matériel agricole et forestier - Contrôle des pulvérisateurs et distributeurs d'engrais
liquides en service - Partie 1: Généralités (ISO/DIS 16122-1:2011)
Ta slovenski standard je istoveten z: prEN ISO 16122-1
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
oSIST prEN ISO 16122-1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16122-1:2011

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16122-1:2011


EUROPEAN STANDARD
DRAFT
prEN ISO 16122-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2011
ICS 65.060.40
English Version
Agricultural and forestry machinery - Inspection of sprayers and
liquid fertilizer distributors in use - Part 1: General (ISO/DIS
16122-1:2011)
Matériel agricole et forestier - Contrôle des pulvérisateurs Land- und Forstmaschinen - Kontrolle von in Gebrauch
et distributeurs d'engrais liquides en service - Partie 1: befindlichen Pflanzenschutzgeräten zum Ausbringen von
Généralités (ISO/DIS 16122-1:2011) Pflanzenschutzmitteln und flüssigen Düngemitteln - Teil 1:
Allgemeines (ISO/DIS 16122-1:2011)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 144.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 16122-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16122-1:2011
prEN ISO 16122-1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16122-1:2011
prEN ISO 16122-1:2011 (E)
Foreword
This document (prEN ISO 16122-1:2011) has been prepared by Technical Committee CEN/TC 144 “Tractors
and machinery for agriculture and forestry", the secretariat of which is held by AFNOR, in collaboration with
Technical Committee ISO/TC 23 "Tractors and machinery for agriculture and forestry".
This document is currently submitted to the parallel Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 16122-1:2011

---------------------- Page: 6 ----------------------
oSIST prEN ISO 16122-1:2011

DRAFT INTERNATIONAL STANDARD ISO/DIS 16122-1
ISO/TC 23/SC 6 Secretariat: AFNOR
Voting begins on Voting terminates on

2011-04-19 2011-09-19
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION  •  МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ  •  ORGANISATION INTERNATIONALE DE NORMALISATION

Agricultural and forestry machinery — Inspection of sprayers
and liquid fertilizer distributors in use —
Part 1:
General
Matériel agricole et forestier — Contrôle des pulvérisateurs et distributeurs d'engrais liquides en service —
Partie 1: Généralités
ICS 65.060.40





ISO/CEN PARALLEL PROCESSING
This draft has been developed within the European Committee for Standardization (CEN), and
processed under the CEN-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.

To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.


THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
©  International Organization for Standardization, 2011

---------------------- Page: 7 ----------------------
oSIST prEN ISO 16122-1:2011
ISO/DIS 16122-1

Copyright notice
This ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permitted
under the applicable laws of the user’s country, neither this ISO draft nor any extract from it may be
reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic,
photocopying, recording or otherwise, without prior written permission being secured.
Requests for permission to reproduce should be addressed to either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Reproduction may be subject to royalty payments or a licensing agreement.
Violators may be prosecuted.

ii © ISO 2011 – All rights reserved

---------------------- Page: 8 ----------------------
oSIST prEN ISO 16122-1:2011
ISO/DIS 16122-1
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Terms and definition .1
3 Criteria for classification of equipment.1
4 Requirements.2
4.1 General .2
4.2 Place for inspection .2
4.3 Pre-inspection.2
4.3.1 General .2
4.3.2 Cleaning .2
4.3.3 Power transmission parts .2
4.3.4 Moving parts .3
4.3.5 Pipes and hoses for hydraulic transmission.3
4.3.6 Structural parts and framework .3
4.3.7 Safety valve (optional test).3
4.3.8 Lockable foldable parts .3
5 Inspection.3
6 Test report.3
Annex A (normative) Specific types of equipment to be inspected using ISO 16122 .4
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EC Directive 2009/128/EC.7
Bibliography.8

© ISO 2011 – All rights reserved iii

---------------------- Page: 9 ----------------------
oSIST prEN ISO 16122-1:2011
ISO/DIS 16122-1
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be repr esented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of techni cal committees is to prep are International Standards. Draft International Standa rds
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the p ossibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 16122-1 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 6, and by Techni cal Committee CEN/TC 144, Tractors and machinery for
agriculture and forestry in collaboration.
ISO 16122 consists of the following parts, under the general title Agricultural and forestry machines —
Inspection of sprayers and liquid fertilizer dist
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.