iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 16122-3:2015

(Main)

Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops (ISO 16122-3:2015)

Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops (ISO 16122-3:2015)

ISO 16122-3:2015, when used together with ISO 16122-1, specifies the requirements and test methods for the inspection of sprayers for bushes and trees, when in use. The requirements relate mainly to the condition of the sprayer with respect to its potential risk for the environment and its performance to achieve a good application. Requirements for the protection of inspectors during an inspection are given in ISO 16122-1.

Land- und Forstmaschinen - Kontrolle von in Gebrauch befindlichen Pflanzenschutzgeräten - Teil 3: Geräte für Raumkulturen (ISO 16122-3:2015)

Diese Internationale Norm legt in Verbindung mit ISO 16122 1 die Anforderungen an und Prüfverfahren für die Kontrolle von in Gebrauch befindlichen Sprühgeräten für Raumkulturen fest.
Die Anforderungen beziehen sich in erster Linie auf den Gerätezustand in Hinblick auf mögliche Risiken für die Umwelt und das Leistungsvermögen zur Erreichung einer guten Anwendung.
ANMERKUNG   Anforderungen in Bezug auf die Sicherheit des Prüfers während der Kontrolle sind in ISO 16122-1 enthalten.

Matériel agricole et forestier - Contrôle des pulvérisateurs en service - Partie 3: Pulvérisateurs pour cultures arbustives et arboricoles (ISO 16122-3:2015)

l'ISO 16122-3:2015, lorsqu'elle est utilisée conjointement avec l'ISO 16122-1, spécifie les exigences et les méthodes d'essai relatives au contrôle des pulvérisateurs pour cultures arbustives et arboricoles en service. Les exigences concernent principalement l'état de l'équipement eu égard à son risque potentiel pour l'environnement et sa performance pour obtenir une bonne application. Les exigences relatives à la protection des inspecteurs pendant le contrôle sont données dans l'ISO 16122-1.

Kmetijski in gozdarski stroji - Kontrola škropilnikov v uporabi - 3. del: Navpični jamborni škropilniki in podobne naprave (ISO 16122-3:2015)

General Information

Status
Published
Publication Date
17-Mar-2015
Withdrawal Date
29-Sep-2015
ICS
65.060.40 - Plant care equipment
Technical Committee
CEN/TC 144 - Tractors and machinery for agriculture and forestry
Drafting Committee
CEN/TC 144/WG 3 - Mobile machines and trailers
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Mar-2015
Due Date
05-Apr-2015
Completion Date
18-Mar-2015
Directive
2009/128/EC - Directive 2009/128/EC of the European Parliament and of the Council of 21 october 2009 establsihing a framework for Community action to achieve the sustainable use of pesticides
Mandate
M/435 - Mandate to CEN, CENELEC and ETSI for the development of a standards on inspection of pesticide application equipment in use,
Ref Project
SIST EN ISO 16122-3:2015 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops (ISO 16122-3:2015)

Relations

Replaces
EN 13790-2:2003 - Agricultural machinery - Sprayers - Inspection of sprayers in use - Part 2: Air-assisted sprayers for bush and tree crops
Effective Date
11-Apr-2012

Buy Standard

EN ISO 16122-3:2015EN ISO 16122-3:2015
PreviousNext
Standard
EN ISO 16122-3:2015
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 16122-3:2015
01-junij-2015
1DGRPHãþD
SIST EN 13790-2:2004
.PHWLMVNLLQJR]GDUVNLVWURML.RQWURODãNURSLOQLNRYYXSRUDELGHO1DYSLþQL
MDPERUQLãNURSLOQLNLLQSRGREQHQDSUDYH ,62
Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for
bush and tree crops (ISO 16122-3:2015)
Land- und Forstmaschinen - Kontrolle von in Gebrauch befindlichen
Pflanzenschutzgeräten - Teil 3: Geräte mit vertikalem Gestänge, Sprühgeräte und
ähnliche Geräte (ISO 16122-3:2015)
Matériel agricole et forestier - Contrôle des pulvérisateurs en service - Partie 3:
Pulvérisateurs à rampe verticale, nébulisateurs et similaires (ISO 16122-3:2015)
Ta slovenski standard je istoveten z: EN ISO 16122-3:2015
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
SIST EN ISO 16122-3:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 16122-3:2015

---------------------- Page: 2 ----------------------

SIST EN ISO 16122-3:2015

EUROPEAN STANDARD
EN ISO 16122-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2015
ICS 65.060.40 Supersedes EN 13790-2:2003
English Version
Agricultural and forestry machinery - Inspection of sprayers in
use - Part 3: Sprayers for bush and tree crops (ISO 16122-
3:2015)
Matériel agricole et forestier - Contrôle des pulvérisateurs Land- und Forstmaschinen - Kontrolle von in Gebrauch
en service - Partie 3: Pulvérisateurs pour cultures befindlichen Pflanzenschutzgeräten - Teil 3: Geräte mit
arbustives et arboricoles (ISO 16122-3:2015) vertikalem Gestänge, Sprühgeräte und ähnliche Geräte
(ISO 16122-3:2015)
This European Standard was approved by CEN on 13 September 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16122-3:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 16122-3:2015
EN ISO 16122-3:2015 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2009/128/EC .4
2

---------------------- Page: 4 ----------------------

SIST EN ISO 16122-3:2015
EN ISO 16122-3:2015 (E)
Foreword
This document (EN ISO 16122-3:2015) has been prepared by Technical Committee ISO/TC 23 “Tractors and
machinery for agriculture and forestry“ in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2015, and conflicting national standards shall be
withdrawn at the latest by September 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13790-2:2003.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 16119-5:2023(Main)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 5: Aerial spray systems (ISO 16119-5:2023)
SIST EN ISO 16119-5:2024

This document specifies requirements and the means for their verification for the design and performance of aerial fixed wing and rotary aircraft spray systems for agriculture, forestry, turf, and vegetation control in transport access ways (such as gas and electric lines) with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer.
It is intended to be used with ISO 16119-1:2013, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this document are different from those stated in ISO 16119-1:2013, the requirements of this document take precedence over the requirements of ISO 16119-1:2013 for machines within the scope of this document.
This document does cover safety of aerial spray equipment not covered by ISO 4254 series.
This document is not applicable to sprayers manufactured before the date of its publication, or unmanned aerial vehicles (such as drones).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4254-6:2020/A11:2021(Amendment)
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)
SIST EN ISO 4254-6:2020/A11:2022

2021-10-01: This A11 includes revised Annex ZA to EN ISO 4254-6:2020, both WIs will be presented to  EC for citation

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 28139:2021(Main)
Equipment for crop protection - Knapsack combustion engine-driven airblast sprayers - Safety and environmental requirements and test methods (ISO 28139:2019)
SIST EN ISO 28139:2021

This document specifies safety requirements and their verification, environmental requirements and related test methods, and minimum performance limits, for the design and construction of knapsack combustion engine-driven airblast sprayers as defined in 3.9.
It describes methods for the elimination or reduction of hazards arising from their use. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
It addresses general operating parameters as well as the potential deposition of spray droplets under specified controlled conditions.
This document deals with all significant hazards, hazardous situations and events, excepting those arising from vibration transmitted to the back of the operator.
It is applicable to knapsack combustion engine-driven airblast sprayers when they are used as intended and under the conditions foreseeable by the manufacturer (see Table A.1).
It is not applicable to:
—          hydraulic pressure sprayers;
—          thermal sprayers;
—          cold foggers;
—          sprayers adapted for the application of dry material.
It is not applicable to knapsack combustion engine-driven airblast sprayers manufactured before the date of its publication. The requirements of this document applies to products manufactured 18 months after publication.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16122-5:2020(Main)
Agricultural and forestry machines - Inspection of sprayers in use - Part 5: Aerial spray systems (ISO 16122-5:2020)
SIST EN ISO 16122-5:2021

This document specifies the requirements, test methods and verification of the inspection of aerial fixed wing and rotary aircraft spray systems for agriculture, forestry, turf, and vegetation control in transport access ways (such as gas and electric lines), with regard to minimizing the potential risk of environmental contamination during use.
This document applies only to manned aerial aircraft. It does not cover aircraft safety and design criteria for air worthiness, aircraft registration, pilot or operator requirements, all of which are specified separately by countries or regions.
This document relates mainly to the condition of the equipment with respect to its potential risk for the environment and its performance to achieve good applications.
The general requirements of ISO 16122-1 apply where appropriate, including for the protection of inspectors during an inspection.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4254-6:2020(Main)
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)
SIST EN ISO 4254-6:2020

This document, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed and self-propelled agricultural sprayers for use with plant protection products (PPP) and liquid fertilizer application, as placed on the market by the manufacturer and designed for a single operator only. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in ISO 4254-1, the requirements of this document take precedence over the requirements of ISO 4254-1 for machines that have been designed and built according to the provisions of this document.
This document, taken together with ISO 4254-1, deals with significant hazards, hazardous situations and events relevant to sprayers and liquid fertilizer distributors when they are used as intended and under the conditions foreseeable by the manufacturer (see Annex A), excepting the hazards arising from:
—          protection of the driver against spray when spraying (see Foreword);
—          automatically actuated height adjustment systems;
—          the environment, other than noise;
—          moving parts for power transmission except strength requirements for guards and barriers.
This document is not applicable to sprayers and liquid fertilizer distributors which are manufactured before the date of publication of this document.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16122-1:2015(Main)
Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General (ISO 16122-1:2015)
SIST EN ISO 16122-1:2015

ISO 16122-1:2015 defines the general requirements to be fulfilled for the inspection of all types of sprayers for plant protection products used in agriculture, horticulture, forestry and other areas, except knapsack sprayers (see ISO 19932?1 and ISO 19932?2).
The specific requirements for the different types of sprayers are defined in the relevant specific parts of ISO 16122. When used in conjunction with the relevant sprayer specific part, ISO 16122-1:2015 specifies the requirements and test methods for the in use inspection of sprayers. The requirements relate mainly to the condition of the sprayer with respect to potential risks for the environment and its performance to achieve a good application.
ISO 16122-1:2015 also includes minimum requirements for the preparation of the sprayer for the inspection and the minimum safety requirements with respect to the safety of the inspector (test operator) during the inspection.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16122-4:2015(Main)
Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers (ISO 16122-4:2015)
SIST EN ISO 16122-4:2015

ISO 16122-4:2015, when used together with ISO 16122‑1, specifies the requirements and test methods for the inspection of fixed and semi-mobile sprayers, when in use.
The requirements relate mainly to the condition of the sprayer with respect to its potential risk for the environment and its performance to achieve good application.
It does not apply to application equipment for spatial treatment (e.g. foggers).
Note that requirements for the protection of inspectors during an inspection are given in ISO 16122‑1.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16122-2:2015(Main)
Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers (ISO 16122-2:2015)
SIST EN ISO 16122-2:2015

ISO 16122-2:2015, when used together with ISO 16122-1, specifies the requirements and test methods for the inspection of horizontal boom sprayers, when in use. The requirements relate mainly to the condition of the sprayer with respect to its potential risk for the environment and its performance to achieve good application. Requirements for the protection of inspectors during an inspection are given in ISO 16122 1.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16119-4:2014(Main)
Agricultural and forestry machinery - Environmental requirements for sprayers - Part 4: Fixed and semi-mobile sprayers (ISO 16119-4:2014)
SIST EN ISO 16119-4:2015

ISO 16119-4:2014 specifies requirements and the means for their verification for the design and performance of fixed and semi-mobile sprayers, as defined in 3.1 and 3.2, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer.
This type of spraying system is generally a combination of separate elements (main tank, pump and application unit) that can be assembled in fixed installations (fixed sprayers) or with moving parts (semi-mobile sprayers).
ISO 16119-4:2014 does not apply to application equipment for space/spatial treatments.
ISO 16119-4:2014 is intended to be used with ISO 16119‑1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of ISO 16119-4:2014 are different from those stated in ISO 16119‑1, the requirements of ISO 16119-4:2014 take precedence over the requirements of ISO 16119‑1 for machines within the scope of ISO 16119-4:2014. ISO 16119-4:2014 does not cover safety aspects (see ISO 4254‑6).
ISO 16119-4:2014 is not applicable to sprayers manufactured before the date of its publication.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19932-1:2013(Main)
Equipment for crop protection - Knapsack sprayers - Part 1: Safety and environmental requirements (ISO 19932-1:2013)
SIST EN ISO 19932-1:2013

ISO 19932-1:2013 specifies the safety and environmental requirements and their means of verification for the design and construction of knapsack sprayers carried on the back or shoulder of the operator for use with plant protection products. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack sprayers driven by an engine or electric motor using hydraulic pressure atomisation of the spray liquid, with a nominal volume of more than 3 l, for their intended use primarily in agriculture and horticulture.
It does not apply to knapsack mistblowers according to ISO 28139.
ISO 19932-1:2013 deals with all significant hazards, hazardous situations and hazardous events relevant to knapsack sprayers when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, excepting the hazards arising from: static electricity; explosion or fire from chemicals for spraying; and insufficient structural integrity.
ISO 19932-1:2013 is not applicable to knapsack sprayers which are manufactured before the date of its publication.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day