ASTM E2607-08

Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements

SIGNIFICANCE AND USE
This practice establishes a standard equipment control methodology to aid in fulfillment of shortages derived from production requirements or equipment failures.
This practice encourages an inclusive understanding and communication of the control and tracking of equipment, and enables meaningful discussion between parties with interest in the equipment.
This practice is intended to foster and enable additional standard practices related to or based on these terms and concepts.
SCOPE
1.1 This practice describes the process by which open production and failure related demand requirements are fulfilled using existing equipment components.
Note 1—Differing approval requirements are generally dictated by ownership issues. For example, approvals for cannibalization/reclamation of company-owned property may vary substantially from that required for customer-owned property. In all cases, the specific approach to approvals and the levels of approval required are prescribed by the entity with title to/ownership of the property. These requirements are internal to the owning entity. In general, company-owned property is handled in accordance with established practice specific to each individual entity while customer-owned property is handled based upon established practices specific to each entity or as specified within a contractual document.
1.2 This practice is intended to be applicable and appropriate for all equipment-holding entities.
1.3 This practice covers property categorized as equipment.
1.4 This practice can be applied on to an individual item of equipment, groupings of equipment, or to all, or a subset of an entity's equipment.
1.5 This practice clarifies and enables effective and efficient support of equipment in accordance with the provisions of Practice E 2279.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 14-Jun-2008
• ICS: 03.100.20 - Trade. Commercial function. Marketing
• ICS: 03.160 - Law. Administration
• Technical Committee: E53 - Asset Management
• Drafting Committee: E53.04 - Reutilization and Disposal

Relations

• Referred By: ASTM E2135-22 - Standard Terminology for Property and Asset Management
• Effective Date: 15-Jun-2008
• Referred By: ASTM E2675-22 - Standard Practice for Asset Management System Outcomes
• Effective Date: 15-Jun-2008
• Referred By: ASTM E2279-20 - Standard Practice for Establishing the Guiding Principles of Property Asset Management
• Effective Date: 15-Jun-2008

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E2607 − 08
StandardPractice for
Cannibalization/Reclamation of Serviceable Equipment
Components to Support Demand Requirements
This standard is issued under the fixed designation E2607; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope Property Management
1.1 This practice describes the process by which open
3. Terminology
production and failure related demand requirements are ful-
3.1 Definitions—For definitions relating to property and
filled using existing equipment components.
asset management, refer to Terminology E2135.
NOTE 1—Differing approval requirements are generally dictated by
3.1.1 acquisition—obtaining hardware, supplies, or services
ownership issues. For example, approvals for cannibalization/reclamation
through purchase, lease, or other means, including transfer or
of company-owned property may vary substantially from that required for
fabrication, whether the supplies or services are already in
customer-owned property. In all cases, the specific approach to approvals
and the levels of approval required are prescribed by the entity with title existence or must be created, developed, demonstrated, and
to/ownership of the property. These requirements are internal to the
evaluated.
owning entity. In general, company-owned property is handled in accor-
3.1.2 cannibalization—removal of serviceable components
dance with established practice specific to each individual entity while
customer-owned property is handled based upon established practices from one item of equipment in order to install them on another
specific to each entity or as specified within a contractual document.
item of equipment. The removal of components from one item
of equipment for the purpose of repairing other similar
1.2 This practice is intended to be applicable and appropri-
equipment.
ate for all equipment-holding entities.
3.1.3 component—a part of a mechanical or electrical com-
1.3 This practice covers property categorized as equipment.
plex.
1.4 This practice can be applied on to an individual item of
3.1.4 condition code—a symbol that signifies the physical
equipment, groupings of equipment, or to all, or a subset of an
operating condition of property.
entity’s equipment.
3.1.5 entity—agency, company, organization, or institution.
1.5 This practice clarifies and enables effective and efficient
3.1.6 equipment—non-expendable, tangible moveable prop-
support of equipment in accordance with the provisions of
erty needed for the performance of a task or useful in effecting
Practice E2279.
an obligation.
1.6 This standard does not purport to address all of the
3.1.7 excess equipment—equipment no longer required by
safety concerns, if any, associated with its use. It is the
the entity holding title.
responsibility of the user of this standard to establish appro-
priate safety and health practices and determine the applica-
3.1.8 reclamation—removal of serviceable components
bility of regulatory limitations prior to use.
from excess equipment.
3.1.9 repair—to restore to a sound or good state after wear,
2. Referenced Documents
partial destruction, or damage.
2.1 ASTM Standards:
3.1.10 screen—to review or compare property on hand
E2135 Terminology for Property and Asset Management
against a known or anticipated requirement.
E2279 Practice for Establishing the Guiding Principles of
4. Significance and Use
4.1 This practice establishes a standard equipment control
This practice is under the jurisdiction of ASTM Committee E53 on Property
Management Systems and is the direct responsibility of Subcommittee E53.04 on
methodology to aid in fulfillment of shortages derived from
Reutilization and Disposal.
production requirements or equipment failures.
Current edition approved June 15, 2008. Published July 2008. DOI: 10.1520/
E2607-08.
4.2 This practice encourages an inclusive understanding and
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
communication of the control and tracking of equipment, and
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
enables meaningful discussion between parties with interest in
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. the equipment.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
E2607 − 08
4.3 This practice is intended to foster and enable additional 5.2.7 Install cannibalized part on recipient item when re-
standard practices related to or based on these terms and placement part is obtained through acquisition channels.
concepts.
5.2.8 Reinstall cannibalized part on source candidate. If
source candidate ite
...