iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D4154-01

(Specification)

Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics

Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics

SCOPE
1.1 This performance specification covers knitted and woven fabrics comprised of any textile fiber or mixture of fibers used in men's and boy's beachwear and sports shirts.  
1.2 This performance specification is not applicable to knitted and woven fabrics used for interlining and swimwear.  
1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.
1.4  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

Status
Historical
Publication Date
09-May-2001
ICS
61.020 - Clothes
Technical Committee
D13 - Textiles
Drafting Committee
D13.61 - Apparel
Current Stage
Ref Project

Relations

Replaces
ASTM D4154-95a - Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics
Effective Date
10-May-2001
Replaced By
ASTM D4154-01(2008) - Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics
Effective Date
01-Aug-2008
Referred By
ASTM D6321/D6321M-22 - Standard Practice for the Evaluation of Machine Washable T-Shirts
Effective Date
10-May-2001
Referred By
ASTM D4231-22 - Standard Practice for Evaluation of Launderable Woven Dress Shirts and Sports Shirts
Effective Date
10-May-2001

Buy Standard

ASTM D4154-01 - Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt FabricsASTM D4154-01 - Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics
PreviousNext
Technical specification
ASTM D4154-01 - Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics
English language
4 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D 4154 – 01
Standard Performance Specification for
Men’s and Boys’ Knitted and Woven Beachwear and Sports
1
Shirt Fabrics
This standard is issued under the fixed designation D 4154; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope D 3786 Test Method for Hydraulic Bursting Strength of
Knitted Goods and Nonwoven Fabrics: Diaphragm Burst-
1.1 This performance specification covers knitted and wo-
4
ing Strength Tester Method
ven fabrics comprised of any textile fiber or mixture of fibers
D 3787 Test Method for Bursting Strength of Knitted
used in men’s and boy’s beachwear and sports shirts.
4
Goods: Constant-Rate-of-Traverse (CRT) Ball Burst Test
1.2 This performance specification is not applicable to
D 5034 Test Method for Breaking Strength and Elongation
knitted and woven fabrics used for interlining and swimwear.
of Textile Fabrics (Grab Test)
1.3 These requirements apply to both the length and width
5
2.2 AATCC Test Methods:
directions for those properties where fabric direction is perti-
8 Colorfastness to Crocking: AATCC Crockmeter Method
nent.
15 Colorfastness to Perspiration
1.4 This standard does not purport to address all of the
16 Colorfastness to Light
safety concerns, if any, associated with its use. It is the
23 Colorfastness to Burnt Gas Fumes
responsibility of the user of this standard to establish appro-
61 Colorfastness to Washing, Domestic, and Laundering,
priate safety and health practices and determine the applica-
Commercial: Accelerated
bility of regulatory limitations prior to use.
96 Dimensional Changes in Laundering of Woven and
2. Referenced Documents Knitted Textiles Except Wool
2
116 Colorfastness to Crocking: RotaryVertical Crockmeter
2.1 ASTM Standards:
Method
D 123 Terminology Relating to Textiles
124 Appearance of Durable Press Fabrics After Repeated
D 434 Test Method for Resistance to Slippage of Yarns in
Home Launderings
Woven Fabrics Using a Standard Seam
132 Colorfastness to Drycleaning
D 1424 Test Method for Tear Resistance of Fabrics by
135 Dimensional Changes inAutomatic Home Launderings
Falling–Pendulum Type (Elmendorf) Apparatus
of Durable Press Woven of Knit Fabrics
D 2262 Test Method for Tearing Strength of Woven Fabrics
172 Colorfastness to Non-chlorine Bleach in Home Laun-
by the Tongue (Single Rip) Method (Constant Rate-of-
3
dering
Traverse Tensile Testing Machine)
188 Colorfastness to Chlorine Bleach in Home Laundering
D 2594 Test Methods for Stretch Properties of Knitted
Evaluation Procedure 1 Gray Scale for Color Change
Fabrics Having Low Power
Evaluation Procedure 2 Gray Scale for Staining
D 2724 Test Methods for Bonded, Fused, and Laminated
Evaluation Procedure 3 AATCC Chromatic Transference
Apparel Fabrics
Scale
D 2905 Practice for Statements on Number of Specimens
6
2.3 Federal Standard:
for Textiles
16 CFR, Chapter II—Consumer Product Safety Commis-
sion Subchapter D—Flammable Fabrics Act Regulations.
1
This specification is under the jurisdiction of ASTM Committee D13 on
Textiles and is the direct responsibility of Subcommittee D13.61 on Apparel.
Current edition approved May 10, 2001. Published July 2001. Originally
published as D 4154 – 82. Last previous edition D 4154 – 95a.
2 4
For referenced ASTM standards, visit the ASTM website, www.astm.org, or Discontinued; see 1997 Annual Book of ASTM Standards, Vol 07.02.
5
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM AATCC Technical Manual, available from theAmericanAssociation of Textile
Standards volume information, refer to the standard’s Document Summary page on Chemists and Colorists, P.O. Box 12215, Research Triangle Park, NC 27709.
6
the ASTM website. Available from Superintendent of Documents, Government Printing Office,
3
Discontinued; see 1994 Annual Book of ASTM Standards, Vol 07.01. Washington, DC 20402.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
D4154–01
8
7
in the manufacture of garments.
2.4 Military Standard:
MIL-STD-105D Sampling Procedures and Tables for In-
3.4 Definitions of terms used in a dictionary of common
spection by Attributes
terms are suitable for terms used in this performance specifi-
cation.
NOTE 1—Reference to test methods in this specification give only the
permanent part of the designation of ASTM, AATCC, or other test
4. Specification Requirements
methods. The current editions of each test method cited shall prevail.
4.1 The properties of fabrics of woven and knitted fabrics
3. Terminology
for m
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D3996-23(Specification)
Standard Performance Specification for Knit Swimwear Fabrics

SIGNIFICANCE AND USE
5.1 Upon mutual agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification.  
5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller.  
5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D3996 except for the following characteristic(s).”  
5.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.  
5.4 The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods.
SCOPE
1.1 This performance specification covers circular and warp knitted fabrics for use in knit swimwear, composed of any textile fiber or mixture of textile fibers.  
1.2 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.  
1.3 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM D4118-23(Specification)
Standard Performance Specification for Woven Coverall, Dungaree, Overall, and Shop-Coat Fabrics

SIGNIFICANCE AND USE
5.1 Upon agreement between the purchaser and the supplier, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification.  
5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified upon agreement between the purchaser and the supplier.  
5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D4118 except for the following characteristic(s).”  
5.3 Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.  
5.4 The uses and significance of particular properties and methods are discussed in the appropriate sections of the specified methods.
SCOPE
1.1 This performance specification covers woven fabrics, composed of any textile fiber or mixture of textile fibers, to be used in the manufacture of coveralls, dungarees, overalls and shop coats.  
1.2 This performance specification recognizes two levels of wearing severity relative to performance requirements for these fabrics.  
1.3 This performance specification is not applicable to woven fabrics intended for use in the manufacture of industrial-protective clothing.  
1.4 These requirements apply to the length and width directions for those properties where fabric direction is pertinent.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM D4232-23(Specification)
Standard Performance Specification for Woven Career Apparel Fabrics: Dress and Vocational

SIGNIFICANCE AND USE
5.1 Upon mutual agreement between the purchaser and the supplier, woven fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification.  
5.2 It is recognized that where more critical requirements call for higher performance levels, for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. One or more of the requirements may be modified by mutual agreement between the purchaser and the supplier.  
5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D4232 except for the following characteristic(s).”  
5.3 Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.  
5.4 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods.
SCOPE
1.1 This performance specification covers the performance requirements for woven fabrics for career apparel: dress and vocational.  
1.2 This performance specification is not applicable to career apparel fabrics that do not patently fit the category of Career Dress Apparel. Performance specifications for such fabrics should be as agreed to between the purchaser and the seller. This performance specification is not applicable to overcoat or topcoat uniform fabrics.  
1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM D7268-23(Specification)
Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear

ABSTRACT
This specification covers the evaluation of specific performance characteristics of importance in seamless knit garments, including camisoles, panties, slips, girdles and swimwear. Different tests shall be conducted in order to determine the following properties of seamless knit garments: bursting strength, colorfastness to laundering, colorfastness to drycleaning, colorfastness to crocking, colorfastness to light, colorfastness to perspiration, colorfastness to intimates, colorfastness to sea water, colorfastness to chlorinated pool water, colorfastness to chlorine and non-chlorine bleach, dimensional change, stretch, flammability, garnet twist, and fiber content.
SIGNIFICANCE AND USE
4.1 Upon mutual agreement between the purchaser and the supplier, seamless knit garments intended for this end use should meet all of the requirements listed in Table 1 of this specification. (A) See Note 4.  
4.2 It is recognized that, for purposes of fashion or aesthetics, the ultimate consumer of articles made from these fabrics may find acceptable products that do not conform to all of the requirements listed in Table 1. Therefore, one or more of the requirements in Table 1 may be modified by mutual agreement between the purchaser and the supplier.  
4.2.1 In such cases, any references to the specifications should specify that: “This product meets ASTM specifications XXXX except for the following characteristic(s).”  
4.3 Where no pre-purchase agreement has been reached between the purchaser and supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 4.2, ultimate consumer demands dictate varying performance parameters for a particular product.  
4.4 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods.
SCOPE
1.1 This specification covers the evaluation of specific performance characteristics of importance in seamless knit garments, including camisoles, panties, slips, girdles and swimwear.  
1.2 The following safety hazards caveat pertains only to the test methods described in this performance specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM D3995-23(Specification)
Standard Performance Specification for Knitted Career Apparel Fabrics: Dress and Vocational

SIGNIFICANCE AND USE
5.1 Upon mutual agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification.  
5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the seller.  
5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D3995 except for the following characteristic(s).”  
5.3 Where no pre-purchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.  
5.4 The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods.
SCOPE
1.1 This performance specification covers the minimum performance requirements for knitted fabrics for dress and vocational career apparel composed of any textile fiber or mixtures of textile fibers.  
1.2 This performance specification is not applicable to career apparel fabrics such as those used in protective clothing, that do not patently fit the categories Career Apparel or Career Apparel, Dress (see Terminology D7022 for these terms). Minimum performance specifications for such fabrics should be as agreed between the purchaser and the seller.  
1.3 These requirements apply to the length and width directions for those factors where each fabric direction is pertinent.  
1.4 The following precautionary statement pertains only to the test methods portion, Section 7, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM D7020-22(Specification)
Standard Performance Specification for Woven Blouse, Dress, Dress Shirt & Sport Shirt Fabrics

ABSTRACT
This performance specification covers fabrics for woven blouses, dresses, dress shirts, and sport shirts. It is not however applicable to woven fabrics used for interlinings. These requirements apply to the length and width directions for those properties where fabric direction is pertinent. The fabrics shall meet the following performance requirements: breaking strength which shall be determined using a constant rate of extension tensile testing machine; resistance to yarn slippage; tearing strength; dimensional change during pressing and finishing, after laundering, or after dry cleaning; colorfastness to laundering and dry cleaning; shade change due to sodium hypochlorite bleaching or non-chlorine bleaching, burnt gas fumes, dry and wet crocking, perspiration, and xenon-arc light; fabric smoothness after pressing, laundering, and dry cleaning; and flammability.
SIGNIFICANCE AND USE
4.1 Fabrics intended for this end-use should meet all of the requirements listed in Table 1.  (A) There is more than one method that can be used to measure breaking strength, tearing strength and colorfastness. These methods cannot be used interchangeably since there may be no overall correlation between them (see Note 2 and Note 3).(B) See Note 5.  
4.2 It should be recognized that fabrics can be produced utilizing an almost infinite number of combinations of construction variables (e.g., type of fibers, percentage of fibers, yarn twist, yarn number, warp and pick count, chemical and mechanical finishes). Additionally, fashion or aesthetics dictate that the ultimate consumer may find acceptable articles made from fabrics that do not conform to all of the requirements in Table 1.  
4.2.1 Hence, no single performance specification can possibly apply to all the various fabrics that could be utilized for this end-use.  
4.3 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods.
SCOPE
1.1 This performance specification covers fabrics for woven blouses, dresses, dress shirts, and sport shirts.  
1.2 This performance specification is not applicable to woven fabrics used for interlinings.  
1.3 These requirements apply to the length and width directions for those properties where fabric direction is pertinent.  
1.4 When a fabric requires special treatment, specific methods will be described as they are developed for that material, and such special tests will have precedence over these general requirements.  
1.5 The following precautionary caveat pertains only to the test methods described in this performance specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM D3994-22(Specification)
Standard Performance Specification for Woven Swimwear Fabrics

SIGNIFICANCE AND USE
5.1 Upon mutual agreement between the purchaser and the supplier, woven fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification.  
5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the supplier.  
5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D3994, except for the following characteristic(s).”  
5.3 Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.  
5.4 The significance and use of particular properties and test methods are discussed in the appropriate sections of the specified test methods.
SCOPE
1.1 This performance specification covers woven fabrics for use in men's, women's and children's swimwear, composed of any textile fiber or mixture of textile fibers.  
1.2 These requirements apply to the length and width directions for those properties where fabric direction is pertinent.  
1.3 The following safety hazards caveat pertains only to the test method described in this specification:  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM D3562-22(Specification)
Standard Performance Specification for Woven Drycleanable Coat Fabrics

SIGNIFICANCE AND USE
4.1 Upon mutual agreement between the purchaser and the seller, woven fabrics intended for this end use should meet all of the requirements listed in Table 1 of this specification. (A) See Note 6.  
4.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1; therefore, one or more of the requirements may be modified by mutual agreement between the purchaser and the seller.  
4.2.1 In such cases, any references to the specification shall specify that: This fabric meets Performance Specification D3562 except for the following characteristic(s).  
4.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 4.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.  
4.4 The significance and uses of particular properties and test methods are discussed in the appropriate sections of the specified test methods.
SCOPE
1.1 This performance specification covers woven drycleanable topcoats, overcoats, and dress coat outer fabrics composed of any textile fiber or mixture of textile fibers.  
1.2 This performance specification is not applicable to woven fabrics used for linings, interlinings, rainwear garments, and all-purpose, water-repellent garments nor is this performance specification applicable to bonded or laminated fabrics.  
1.3 These requirements apply to both the length and width directions for those properties where each fabric direction is pertinent.  
1.4 When a fabric requires special treatment, specific methods will be described as they are developed for that material, and such special tests will have precedence over these general requirements.  
1.5 The following precautionary caveat pertains only to the test method portion, Section 7, of this performance specification:This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off
ASTM
ASTM D4154-22(Specification)
Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics

SIGNIFICANCE AND USE
5.1 Upon mutual agreement between the purchaser and the supplier, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification.  
5.2 It is recognized that for purposes of fashion or aesthetics, the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the supplier.  
5.2.1 In such cases, any references to the specification shall specify that: This fabric meets ASTM Specification D4154 except for the following characteristic(s).”  
5.3 Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.  
5.4 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods.
SCOPE
1.1 This performance specification covers knitted and woven fabrics comprised of any textile fiber or mixture of fibers used in men's and boy's beachwear and sports shirts.  
1.2 This performance specification is not applicable to knitted and woven fabrics used for interlining and swimwear.  
1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM D4119-22(Specification)
Standard Performance Specification for Men's and Boys' Knitted Dress Shirt Fabrics

SIGNIFICANCE AND USE
5.1 Upon agreement between the purchaser and the seller, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification.  
5.2 It is recognized that for purposes of fashion or aesthetics the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified upon agreement between the purchaser and the seller.  
5.2.1 In such cases, any references to the specification shall specify that: “This fabric meets ASTM Specification D4119 except for the following characteristic(s).”  
5.3 Where no prepurchase agreement has been reached between the purchaser and the seller, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric.  
5.4 The uses and significance of particular properties and methods are discussed in the appropriate sections of the specified methods.
SCOPE
1.1 This performance specification covers knitted fabrics comprised of any textile fiber or mixture of fibers, used in men's and boy's dress shirts.  
1.2 This performance specification is not applicable to knitted fabrics used for interlinings.  
1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    3 pages
    English language
    sale 15% off
  • Technical specification
    3 pages
    English language
    sale 15% off