ASTM E2114-05a

Standard Terminology for Sustainability Relative to the Performance of Buildings

SCOPE
1.1 This terminology consists of terms and definitions pertaining to sustainable development; and, in particular to sustainability relative to the performance of buildings.
1.2 The purpose of this terminology is to provide meanings and explanations of terms applicable to sustainable development. In the interest of common understanding and standardization, consistent word usage is encouraged to help eliminate the major barrier to effective technical communication.
1.3 It is recommended that terms used only within an individual standard, and having a meaning unique to that standard, be defined or explained in the terminology section of that individual standard.
1.4 Certain standard definitions herein are adopted from other sources. Each is an exact copy. The source is identified at the right margin following the definition, and is listed in Section 2.
1.5 Terms are listed in alphabetical sequence. Compound terms appear in the natural spoken order.

General Information

• Status: Historical
• Publication Date: 31-May-2005
• ICS: 01.040.91 - Construction materials and building (Vocabularies)
• ICS: 91.040.01 - Buildings in general
• Technical Committee: E60 - Sustainability
• Drafting Committee: E60.01 - Buildings and Construction

Relations

• Replaces: ASTM E2114-05 - Standard Terminology for Sustainability Relative to the Performance of Buildings
• Effective Date: 01-Jun-2005
• Replaced By: ASTM E2114-06 - Standard Terminology for Sustainability Relative to the Performance of Buildings
• Effective Date: 15-Feb-2006
• Referred By: ASTM E3341-22 - Standard Guide for General Principles of Resilience
• Effective Date: 01-Jun-2005
• Referred By: ASTM E2400/E2400M-19 - Standard Guide for Selection, Installation, and Maintenance of Plants for Vegetative (Green) Roof Systems
• Effective Date: 01-Jun-2005
• Referred By: ASTM E3073-22 - Standard Guide for Development of Waste Management Plan for Construction, Deconstruction, or Demolition Projects
• Effective Date: 01-Jun-2005
• Referred By: ASTM E1971-19 - Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
• Effective Date: 01-Jun-2005
• Referred By: ASTM E2397/E2397M-19 - Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
• Effective Date: 01-Jun-2005
• Referred By: ASTM E2725-19 - Standard Guide for Basic Assessment and Management of Greenhouse Gases
• Effective Date: 01-Jun-2005
• Referred By: ASTM E2844-23 - Standard Specification for Demonstrating That a Building’s Location Provides Access to Public Transit
• Effective Date: 01-Jun-2005
• Referred By: ASTM E2635-22 - Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation
• Effective Date: 01-Jun-2005
• Referred By: ASTM E3027-18a - Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products
• Effective Date: 01-Jun-2005
• Referred By: ASTM E3136-18 - Standard Guide for Climate Resiliency in Water Resources
• Effective Date: 01-Jun-2005
• Referred By: ASTM E1765-16(2023) - Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes
• Effective Date: 01-Jun-2005
• Referred By: ASTM E2398/E2398M-19 - Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems
• Effective Date: 01-Jun-2005
• Referred By: ASTM E2788/E2788M-18 - Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems
• Effective Date: 01-Jun-2005

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation:E2114–05a
Standard Terminology for
1
Sustainability Relative to the Performance of Buildings
This standard is issued under the fixed designation E 2114; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope* alternative agricultural products, n—bio-based industrial
2
products (non-food, non-feed) manufactured from agricul-
1.1 This terminology consists of terms and definitions
tural materials and animal by-products.
pertaining to sustainable development; and, in particular to
alternative energy, n—see renewable energy.
sustainability relative to the performance of buildings.
bioaccumulation, n—the net accumulation of a substance by
1.2 The purpose of this terminology is to provide meanings
an organism as a result of uptake from all environmental
and explanations of terms applicable to sustainable develop-
sources. (E 943)
ment. In the interest of common understanding and standard-
biobased products, n—products fabricated from alternative
ization, consistent word usage is encouraged to help eliminate
agricultural materials and forestry materials, or both.
the major barrier to effective technical communication.
biodegradable, adj—capable of decomposing under natural
1.3 It is recommended that terms used only within an
conditions into elements found in nature.
individual standard, and having a meaning unique to that
biodiversity, n—the variability among living organisms from
standard, be defined or explained in the terminology section of
all sources including: terrestrial, marine, and other aquatic
that individual standard.
ecosystems and the ecological complexes of which they are
1.4 Certain standard definitions herein are adopted from
apart;thisincludesdiversitywithinspecies,betweenspecies
other sources. Each is an exact copy.The source is identified at
and of ecosystems.
the right margin following the definition, and is listed in
biological control agents, n—living organisms used to elimi-
Section 2.
nate or regulate the population of other living organisms.
1.5 Terms are listed in alphabetical sequence. Compound
biological diversity, n—see biodiversity.
terms appear in the natural spoken order.
biomagnification, n—the increase in tissue concentration of
2. Referenced Documents
poorly depurated materials in organisms along a series of
3
predator-preyassociations,primarilythroughthemechanism
2.1 ASTM Standards:
of dietary accumulation.
D 1356 Terminology Relating to Sampling and Analysis of
biomass, n—(1) All living material in a given area. (2) Any
Atmospheres
material which is or was a living organism or excreted from
E 631 Terminology of Building Construction
a microorganism.
E 833 Terminology of Building Economics
E 943 Terminology Relating to Biological Effects and En-
DISCUSSION—It often refers to vegetation.
vironmental Fate
4
building, n—(1) A shelter comprising a partially or totally
2.2 ISO Standard:
enclosed space(s), erected by means of planned forces of
14040 Life Cycle Assessment—Principles and Framework
forming and combining materials. (2) The act or process of
3. Terminology construction. (E 631)
building performance, n—the behavior in service of con-
3.1 Definitions:
struction as a whole, or of the building components.
(E 631)
1
This terminology is under the jurisdiction of ASTM Committee E06 on
building related illness, BRI, n—diagnosableillnessofwhich
Performance of Buildings and is the direct responsibility of Subcommittee E06.71
cause and symptoms can be directly attributed to a specific
on Sustainability.
pollutant source within a building (for example, Legion-
Current edition approved June 1, 2005. Published June 2005. Originally
naire’s disease, hypersensitivity, pneumonitis). BRI differs
approved in 2000. Last previous edition approved in 2005 as E 2114 – 05.
2
Boldfaced terms are defined in this terminology.
from sick building syndrome (SBS) conditions because the
3
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
symptoms of the disease persist alter leaving the building,
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
unlike SBS where the occupant experiences relief shortly
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. after leaving the building.
4
Available fromAmerican National Standards Institute (ANSI), 25 W. 43rd St.,
4th Floor, New York, NY 10036.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
...