ASTM C1671-15
(Practice)Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging
SIGNIFICANCE AND USE
4.1 For criticality control of nuclear fuel in dry storage and transportation, the most commonly used neutron absorber materials are borated stainless steel alloys, borated aluminum alloys, and boron carbide aluminum alloy composites. The boron used in these neutron absorber materials may be natural or enriched in the nuclide 10B. The boron is usually incorporated either as an intermetallic phase (for example, AlB2, TiB2, CrB2, etc.) in an aluminum alloy or stainless steel, or as a stable chemical compound particulate such as boron carbide (B4C), typically in an aluminum MMC or cermet.
4.2 While other neutron absorbers continue to be investigated, 10B has been most widely used in these applications, and it is the only thermal neutron absorber addressed in this standard.
4.3 In service, many neutron absorber materials are inaccessible and not amenable to a surveillance program. These neutron absorber materials are often expected to perform over an extended period.
4.4 Qualification and acceptance procedures demonstrate that the neutron absorber material has the necessary characteristics to perform its design functions during the service lifetime.
4.5 The criticality control function of neutron absorber materials in dry cask storage systems and transportation packagings is only significant in the presence of a moderator, such as during loading of fuel under water, or water ingress resulting from hypothetical accident conditions.
4.6 The expected users of this standard include designers, neutron absorber material suppliers and purchasers, government agencies, consultants and utility owners. Typical use of the practice is to summarize practices which provide input for design specification, material qualification, and production acceptance. Adherence to this standard does not guarantee regulatory approval; a government regulatory authority may require different tests or additional tests, and may impose limits or restrictions on the use of a neutron absorbe...
SCOPE
1.1 This practice provides procedures for qualification and acceptance of neutron absorber materials used to provide criticality control by absorbing thermal neutrons in systems designed for nuclear fuel storage, transportation, or both.
1.2 This practice is limited to neutron absorber materials consisting of metal alloys, metal matrix composites (MMCs), and cermets, clad or unclad, containing the neutron absorber boron-10 (10B).
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:C1671 −15
Standard Practice for
Qualification and Acceptance of Boron Based Metallic
Neutron Absorbers for Nuclear Criticality Control for Dry
1
Cask Storage Systems and Transportation Packaging
This standard is issued under the fixed designation C1671; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope E1461 Test Method for Thermal Diffusivity by the Flash
Method
1.1 This practice provides procedures for qualification and
acceptance of neutron absorber materials used to provide
3. Terminology
criticality control by absorbing thermal neutrons in systems
designed for nuclear fuel storage, transportation, or both. 3.1 Definitions:
3.1.1 acceptance test, n—for a neutron absorber material,
1.2 This practice is limited to neutron absorber materials
quality control, tests, and inspections conducted to determine
consisting of metal alloys, metal matrix composites (MMCs),
whether a specific production lot meets selected specified
and cermets, clad or unclad, containing the neutron absorber
10
material properties, characteristics, or both, so that the lot can
boron-10 ( B).
be accepted.
1.3 This standard does not purport to address all of the
3.1.2 areal density, n—for neutron absorber materials with
safety concerns, if any, associated with its use. It is the
flat parallel surfaces, the density of the neutron absorber times
responsibility of the user of this standard to establish appro-
2
the thickness of the material (g/cm ).
priate safety and health practices and determine the applica-
bility of regulatory limitations prior to use.
3.1.3 durability, n—the ability of neutron absorber materials
to withstand service conditions without physical changes that
2. Referenced Documents
would render them unable to perform their design functions.
2
2.1 ASTM Standards:
3.1.4 lot, n—aquantityofaproductormaterialaccumulated
B557 Test Methods for Tension Testing Wrought and Cast
under conditions that are considered uniform for sampling
Aluminum- and Magnesium-Alloy Products
purposes. E456
B557M Test Methods for Tension Testing Wrought and Cast
3.1.5 moderator, n—a material used to reduce neutron
Aluminum- and Magnesium-Alloy Products (Metric)
energy by scattering without appreciable capture.
C791 Test Methods for Chemical, Mass Spectrometric, and
Spectrochemical Analysis of Nuclear-Grade Boron Car-
3.1.6 neutron absorber, n—anuclidethathasalargethermal
bide
neutron absorption cross section (also known as a neutron
E8 Test Methods for Tension Testing of Metallic Materials
poison).
E21 TestMethodsforElevatedTemperatureTensionTestsof
3.1.7 neutron-absorber material, n—a compound, alloy,
Metallic Materials
composite or other material that contains a neutron absorber.
E456 Terminology Relating to Quality and Statistics
3.1.8 neutron attenuation test, n—for neutron absorber
E1225 Test Method for Thermal Conductivity of Solids
materials, a process in which a material is placed in a thermal
Using the Guarded-Comparative-Longitudinal Heat Flow
neutron beam, and the number of neutrons transmitted through
Technique
the material in a specified period of time is counted. The
neutron count can be converted to areal density by performing
1
This practice is under the jurisdiction of ASTM Committee C26 on Nuclear
the same test on a series of appropriate calibration standards
Fuel Cycle and is the direct responsibility of Subcommittee C26.03 on Neutron
and comparing the results.
Absorber Materials Specifications.
Current edition approved Jan. 1, 2015. Published January 2015. Originally
3.1.9 neutron cross section, [barn], n—a measure of the
approved in 2007. Last previous edition approved in 2007 as C1671-07. DOI:
probability that a neutron will interact with a nucleus in the
10.1520/C1671-15.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or absorbing medium and is a function of the neutron energy.
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
3.1.10 open porosity, n—the volume fraction of all pores,
Standards volume information, refer to the standard’s Document Summary page on
the ASTM website. voids, and channels within a solid mass that are interconnected
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
C1671−15
with each other and communicate with the external surface, such as during loading of fuel under water, or water ingress
and thus are measurable by gas or liquid penetration. C242, resulting from hypothetical accident conditions.
C21
4.6 Th
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: C1671 − 07 C1671 − 15
Standard Practice for
Qualification and Acceptance of Boron Based Metallic
Neutron Absorbers for Nuclear Criticality Control for Dry
1
Cask Storage Systems and Transportation Packaging
This standard is issued under the fixed designation C1671; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice provides procedures for qualification and acceptance of neutron absorber materials used to provide criticality
control by absorbing thermal neutrons in systems designed for nuclear fuel storage, transportation, or both.
1.2 This practice is limited to neutron absorber materials consisting of metal alloys, metal matrix composites (MMCs), and
10
cermets, clad or unclad, containing the neutron absorber boron-10 ( B).
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
2
2.1 ASTM Standards:
B557 Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B557M Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
C791 Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide
E8 Test Methods for Tension Testing of Metallic Materials
E21 Test Methods for Elevated Temperature Tension Tests of Metallic Materials
E456 Terminology Relating to Quality and Statistics
E1225 Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
E1461 Test Method for Thermal Diffusivity by the Flash Method
3. Terminology
3.1 Definitions:
3.1.1 acceptance test, n—for a neutron absorber material, quality control, tests, and inspections conducted to determine whether
a specific production lot meets selected specified material properties, characteristics, or both, so that the lot can be accepted.
3.1.2 areal density, n—for neutron absorber materials with flat parallel surfaces, the density of the neutron absorber times the
2
thickness of the material (g/cm ).
3.1.3 durability, n—the ability of neutron absorber materials to withstand service conditions without physical changes that
would render them unable to perform their design functions.
3.1.4 lot, n—a quantity of a product or material accumulated under conditions that are considered uniform for sampling
purposes. E456
3.1.5 moderator, n—a material used to reduce neutron energy by scattering without appreciable capture.
3.1.6 neutron absorber, n—a nuclide that has a large thermal neutron absorption cross section (also known as a neutron poison).
3.1.7 neutron-absorber material, n—a compound, alloy, composite or other material that contains a neutron absorber.
1
This practice is under the jurisdiction of ASTM Committee C26 on Nuclear Fuel Cycle and is the direct responsibility of Subcommittee C26.03 on Neutron Absorber
Materials Specifications.
Current edition approved July 15, 2007Jan. 1, 2015. Published August 2007January 2015. Originally approved in 2007. Last previous edition approved in 2007 as
C1671-07. DOI: 10.1520/C1671-07.10.1520/C1671-15.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
C1671 − 15
3.1.8 neutron attenuation test, n—for neutron absorber materials, a process in which a material is placed in a thermal neutron
beam, and the number of neutrons transmitted through the material in a specified period of time is counted. The neutron count can
be converted to areal density by performing the same test on a series of appropriate calibration standards and comparing the results.
3.1.9 neutron cross section, [barn], n—a measure of the probability that a neutron will interact with a nucleus in the absorbing
medium and is a function of the neutron energy.
3.1.10 open
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.