ASTM E1188-23

Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator

SIGNIFICANCE AND USE
2.1 This practice is intended for use by any technical investigator when investigating an incident that can be reasonably expected to be the subject of litigation. The intent is to obtain sufficient information and physical items to identify evidence associated with the incident and to preserve it for analysis.  
2.2 The quality of evidence may change with time, therefore, special effort should be taken to capture and preserve evidence in an expeditious manner. This practice sets forth guidelines for the collection and preservation of evidence for further analysis.  
2.3 Evidence that has been collected and preserved is identified with, and traceable to, the incident. This practice sets forth guidelines for such procedures.
SCOPE
1.1 This practice covers guidelines for the collection and preservation of information and physical items by any technical investigator pertaining to an incident that can be reasonably expected to be the subject of litigation.  
1.2 This practice describes generally accepted professional principles and operations, although the facts and issues of each situation require consideration, and frequently involve matters not expressly dealt with herein. Deviations from this practice should be based on specific articulable circumstances.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Published
• Publication Date: 31-Aug-2023
• ICS: 19.020 - Test conditions and procedures in general
• Technical Committee: E30 - Forensic Sciences
• Drafting Committee: E30.11 - Interdisciplinary Forensic Science Standards

Relations

• Replaces: ASTM E1188-11(2017) - Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
• Effective Date: 01-Sep-2023
• Referred By: ASTM E1843-20 - Standard Guide for Sexual Violence Investigation, Examination, and Evidence Collection Protocol
• Effective Date: 01-Sep-2023
• Referred By: ASTM E2128-20 - Standard Guide for Evaluating Water Leakage of Building Walls
• Effective Date: 01-Sep-2023
• Referred By: ASTM E1459-13(2018) - Standard Guide for Physical Evidence Labeling and Related Documentation
• Effective Date: 01-Sep-2023
• Referred By: ASTM F561-19 - Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
• Effective Date: 01-Sep-2023
• Referred By: ASTM E860-22 - Standard Practice for Examining and Preparing Items That Are or May Become Involved in Criminal or Civil Litigation
• Effective Date: 01-Sep-2023
• Referred By: ASTM E2733-23 - Standard Guide for Investigation of the Source and Cause of Releases from Underground Storage Tank Systems
• Effective Date: 01-Sep-2023
• Referred By: ASTM G145-08(2023) - Standard Guide for Studying Fire Incidents in Oxygen Systems
• Effective Date: 01-Sep-2023
• Referred By: ASTM E3272-23 - Standard Guide for Collection of Soils and Other Geological Evidence for Criminal Forensic Applications
• Effective Date: 01-Sep-2023
• Referred By: ASTM E3193-21 - Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
• Effective Date: 01-Sep-2023
• Referred By: ASTM E1492-11(2017) - Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
• Effective Date: 01-Sep-2023

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: E1188 − 23 An American National Standard
Standard Practice for
Collection and Preservation of Information and Physical
1
Items by a Technical Investigator
This standard is issued under the fixed designation E1188; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope evidence in an expeditious manner. This practice sets forth
guidelines for the collection and preservation of evidence for
1.1 This practice covers guidelines for the collection and
further analysis.
preservation of information and physical items by any techni-
cal investigator pertaining to an incident that can be reasonably
2.3 Evidence that has been collected and preserved is
expected to be the subject of litigation.
identified with, and traceable to, the incident. This practice sets
forth guidelines for such procedures.
1.2 This practice describes generally accepted professional
principles and operations, although the facts and issues of each
3. Procedure
situation require consideration, and frequently involve matters
not expressly dealt with herein. Deviations from this practice
3.1 Documentary Information—Collect information related
should be based on specific articulable circumstances.
to events and conditions occurring before, during, or after the
incident. Documentary information may be held by any entity
1.3 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the associated with the incident. Make a broad search to identify
documents and, where possible, collect them. Obtain state-
responsibility of the user of this standard to establish appro-
priate safety, health, and environmental practices and deter- ments as early as feasible from all individuals associated with
the incident and the recovery activity.
mine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accor-
3.2 Physical Evidence:
dance with internationally recognized principles on standard-
3.2.1 Plan the investigation to protect physical evidence
ization established in the Decision on Principles for the
significant to the incident. The plan should consider the
Development of International Standards, Guides and Recom-
possibility of identity loss, physical loss, or the deterioration or
mendations issued by the World Trade Organization Technical
destruction of information due to environmental effects or the
Barriers to Trade (TBT) Committee.
recovery and collection activities. For each item considered to
be significant to the incident, document, collect and preserve
2. Significance and Use
physical items and their information content as soon as
2.1 This practice is intended for use by any technical
possible.
investigator when investigating an incident that can be reason-
3.2.2 Document conditions that prevent or interfere with the
ably expected to be the subject of litigation. The intent is to
preservation of any potential evidence in the state in which it
obtain sufficient information and physical items to identify
was found. This might include hazardous or accessibility
evidence associated with the incident and to preserve it for
conditions, weather conditions, or other existing complica-
analysis.
tions.
2.2 The quality of evidence may change with time,
3.2.3 Assign a unique identifier to each item collected and
therefore, special effort should be taken to capture and preserve
include this information in a label securely attached to the item
or as documentation on the item’s container and enter the
1
identifying information on a log sheet together with a brief
This practice is under the jurisdiction of ASTM Committee E30 on Forensic
Sciences and is the direct responsibility of Subcommittee E30.11 on Interdisciplin-
description of the item. The evidence documentation should
ary Forensic Science Standards.
also clearly include any specific details necessary for preser-
Current edition approved Sept. 1, 2023. Published November 2023. Originally
vation of the item, such as temperature control or special
approved in 1987. Last previous edition approved in 2017 as E1188 – 11 (2017).
handling instructions.
DOI: 10.1520/E1188-23.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E1188 − 23
3.3 Photographic Documentation: 3.4.1.2 Location where the evidence was found,
3.3.1
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: E1188 − 11 (Reapproved 2017) E1188 − 23 An American National Standard
Standard Practice for
Collection and Preservation of Information and Physical
1
Items by a Technical Investigator
This standard is issued under the fixed designation E1188; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice covers guidelines for the collection and preservation of information and physical items by any technical
investigator pertaining to an incident that can be reasonably expected to be the subject of litigation.
1.2 This practice recommendsdescribes generally accepted professional principles and operations, although the facts and issues of
each situation require consideration, and frequently involve matters not expressly dealt with herein. Deviations from this practice
should be based on specific articulable circumstances.
1.3 This practice offers a set of instructions for performing one or more specific operations. This standard cannot replace
knowledge, skill or ability acquired through appropriate education, training, and experience and should be used in conjunction with
sound professional judgment.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and healthsafety, health, and environmental practices and determine
the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Significance and Use
2.1 This practice is intended for use by any technical investigator when investigating an incident that can be reasonably expected
to be the subject of litigation. The intent is to obtain sufficient information and physical items to discoveridentify evidence
associated with the incident and to preserve it for analysis.
2.2 The quality of evidence may change with time, therefore, special effort should be taken to capture and preserve evidence in
an expeditious manner. This practice sets forth guidelines for the collection and preservation of evidence for further analysis.
2.3 Evidence that has been collected and preserved shall be is identified with, and be traceable to, the incident. This practice sets
forth guidelines for such procedures.
1
This practice is under the jurisdiction of ASTM Committee E30 on Forensic Sciences and is the direct responsibility of Subcommittee E30.11 on Interdisciplinary
Forensic Science Standards.
Current edition approved March 15, 2017Sept. 1, 2023. Published March 2017November 2023. Originally approved in 1987. Last previous edition approved in 20112017
as E1188 – 11.E1188 – 11 (2017). DOI: 10.1520/E1188-11R17.10.1520/E1188-23.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E1188 − 23
3. Procedure
3.1 Documentary Information—Collect information related to events and conditions occurring before, during, or after the incident.
Documentary information may be held by any entity associated with the incident. Make a broad search to identify documents and,
where possible, collect them. Obtain statements as early as feasible from all individuals associated with the incident and the
recovery activity.
3.2 Physical Evidence:
3.2.1 Plan the investigation to protect physical evidence significant to the incident. The plan should consider the possibility of
identity loss, physical loss, or the deterioration or destruction of information due to environmental effects or the recovery and
collection activities. For each item considered to be significant to the incident, document, collect and preserve physical items and
their information content as soon as possible.
3.2.2 Document conditions that prevent or interfere with the preservation of any potential evidence in the state in which it was
found. This might include hazardous or accessibility conditions, weather conditions, or other existing complications.
3.2.3 Assig
...