ASTM D1408-65(1990)
(Practice)Practice for Measurement and Calibration of Spherical and Spheroidal Tanks (Available as Separate Reprint Only) (Withdrawn 1995)
Practice for Measurement and Calibration of Spherical and Spheroidal Tanks (Available as Separate Reprint Only) (Withdrawn 1995)
General Information
Standards Content (Sample)
ASTM Dl1408 65 W 0759530 0073873 b M
An American National Standard
Designation: D 1408 - 65 (Reapproved 1990)
clS/b
Standard: 2552
-___
Standard Practice for
Measurement and Calibration of Spherical and Spheroidal
t
Tanks’
Thispradice has heett approwd by IIIC sponsoring cottmitrws and accepted by he cooperalittg societies itt accordance wit/t established
procedares.
This practice describes procedures for calibrating spherical tanks (Part 1) and spheroidal tanks (Part 2) which are used as
liquid containers.
NOTE-other calibration standards are as follows:
API Standard: 2550-ASTM Methods D 1220, Measurement and Calibration of Upright Cylindrical Tanks,
API Standard: 2551-ASTM Methods D 1410, Measurement and Calibration of Stationary Horizontal Tanks,
API Standard: 2553-ASTM Methods D 1407, Measurement and Calibration of Barge Tanks.
API Standard: 2554-ASTM Methods D 1409, Measurement and Calibration of Tank
...
This May Also Interest You
SIGNIFICANCE AND USE
4.1 Pumping, filtering, and tank filling of petroleum products, particularly refined distillates, can cause the generation and accumulation of electrostatic charges and can result in static discharges capable of causing fires and explosions. This guide provides an overview of the factors involved in the generation of such electrostatic charges. Methods are described for the alleviation of the problem, and cited authoritative references contain more details.
4.2 This guide is not intended to provide operating or safety rules for the handling of petroleum products to avoid electrostatic hazards.
SCOPE
1.1 This guide describes how static electricity may be generated in petroleum fuel systems, the types of equipment conducive to charge generation, and methods for the safe dissipation of such charges. This guide is intended to increase awareness of potential operating problems and hazards resulting from electrostatic charge accumulation.
1.2 This guide is not intended to provide specific solutions but indicates available techniques the user may wish to investigate to alleviate electrostatic charges. This guide does not cover the effects of stray currents or of lightning, either of which can also produce sparks leading to fires or explosions.
1.3 This guide is not intended to address detailed safety practices associated with static electricity in petroleum product systems.
1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide8 pagesEnglish languagesale 15% off
- Guide8 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
4.1 Pumping, filtering, and tank filling of petroleum products, particularly refined distillates, can cause the generation and accumulation of electrostatic charges and can result in static discharges capable of causing fires and explosions. This guide provides an overview of the factors involved in the generation of such electrostatic charges. Methods are described for the alleviation of the problem, and cited authoritative references contain more details.
4.2 This guide is not intended to provide operating or safety rules for the handling of petroleum products to avoid electrostatic hazards.
SCOPE
1.1 This guide describes how static electricity may be generated in petroleum fuel systems, the types of equipment conducive to charge generation, and methods for the safe dissipation of such charges. This guide is intended to increase awareness of potential operating problems and hazards resulting from electrostatic charge accumulation.
1.2 This guide is not intended to provide specific solutions but indicates available techniques the user may wish to investigate to alleviate electrostatic charges. This guide does not cover the effects of stray currents or of lightning, either of which can also produce sparks leading to fires or explosions.
1.3 This guide is not intended to address detailed safety practices associated with static electricity in petroleum product systems.
1.4 The values in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
- Guide8 pagesEnglish languagesale 15% off
- Guide8 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
Pumping, filtering, and tank filling of petroleum products, particularly refined distillates, can cause the generation and accumulation of electrostatic charges and can result in static discharges capable of causing fires and explosions. This guide provides an overview of the factors involved in the generation of such electrostatic charges. Methods are described for the alleviation of the problem, and cited authoritative references contain more details.
This guide is not intended to provide operating or safety rules for the handling of petroleum products to avoid electrostatic hazards.
SCOPE
1.1 This guide describes how static electricity may be generated in petroleum fuel systems, the types of equipment conducive to charge generation and methods for the safe dissipation of such charges. The guide is intended to increase awareness of potential operating problems and hazards resulting from electrostatic charge accumulation.
1.2 This guide is not intended to provide specific solutions but indicates available techniques the user may wish to investigate to alleviate electrostatic charges. The guide does not cover the effects of stray currents or of lightning, either of which can also produce sparks leading to fires or explosions.
1.3 This guide is not intended to address detailed safety practices associated with static electricity in petroleum product systems.
1.4 The values in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
- Guide8 pagesEnglish languagesale 15% off
SCOPE
1.1 This guide describes how static electricity may be generated in petroleum fuel systems, the types of equipment conducive to charge generation and methods for the safe dissipation of such charges. The guide is intended to increase awareness of potential operating problems and hazards resulting from electrostatic charge accumulation.
1.2 This guide is not intended to provide specific solutions but indicates available techniques the user may wish to investigate to alleviate electrostatic charges. The guide does not cover the effects of stray currents or of lightning, either of which can also produce sparks leading to fires or explosions.
1.3 This guide is not intended to address detailed safety practices associated with static electricity in petroleum product systems.
1.4 The values in SI units are to be regarded as the standard. The values in parentheses are for information only.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
- Guide8 pagesEnglish languagesale 15% off
ABSTRACT
This specification covers the material, design, structural performance, and manufacturing practice requirements for monolithic or sectional corrugated high density polyethylene (HDPE) grease interceptor tanks that are placed between commercial food service (kitchen) drains and sanitary sewer interceptors to minimize the impact of commercial food service effluent containing grease, oils, soap scum and other typical commercial food service wastes on the sanitary sewer system. This specification also covers pipe and fittings for horizontally laid corrugated HDPE grease interceptor tanks. Tanks shall be tested for leakage by performing either vacuum testing or water-pressure testing. All bell and spigot joints shall also be tested as specified.
SCOPE
1.1 This specification covers material, design, structural performance, and manufacturing practice requirements for monolithic or sectional corrugated polyethylene grease interceptor tanks with volumes equal to or greater than 333 gal (1260 L).
1.2 The corrugated high density polyethylene (HDPE) grease interceptor tanks are placed between commercial food service (kitchen) drains and sanitary sewer interceptors to minimize the impact of commercial food service effluent containing grease, oils, soap scum and other typical commercial food service wastes on the sanitary sewer system. Typical sources of commercial kitchen effluent are scullery sinks, pot and pan sinks, dishwashers, soup kettles and floor drains where grease containing materials may exist.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This specification covers pipe and fittings for horizontally laid corrugated HDPE grease interceptor tanks as illustrated in Fig. 1.
FIG. 1 Standard Corrugated HDPE Grease Interceptor
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification4 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
5.1 The general design geometry herein defined applies to both a separate adaptor accessory mating two booms of different geometry as well as boom end connectors (see Terminology F818).
5.2 Interconnectibility is intended to facilitate mating of oil spill response booms of various sizes, strengths, design, and manufacture.
5.3 The use of this general design geometry in no way guarantees the effective performance of the linked boom sections, since each boom’s design and the environmental conditions at each incident govern overall performance.
SCOPE
1.1 This specification covers design criteria requirements, design geometry, material characteristics, and desirable features for oil spill response boom slide connections. These criteria are intended to define minimum mating characteristics and are not intended to be restricted to a specific configuration.
1.2 The specification defines the geometry required to mate with typical Universal slide connectors or Specification F962 connectors with web thickness up to 0.3 in. Some very heavy-duty or PVC connectors may exceed this dimension and not be compatible.
1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification5 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
4.1 This guide is an educational tool for tank owners, operators, and other users and is not intended for use in certifying compliance with the Federal technical standards for underground storage tanks.
4.2 The intent of this guide is to provide an overview of the general requirements. This guide is intended for users who are generally familiar with the requirements of 40 CFR Part 280. The user is advised that this guide does not contain the level of detail necessary to make the determination of whether specific equipment or services meet the detailed technical performance requirements of 40 CFR Part 280.
4.3 This guide does not cover state and local requirements, that can be more stringent than the federal rules. Owners and operators are responsible for meeting federal, state, and, in some circumstances, local requirements. It is recommended that owners and operators familiarize themselves with these requirements as well.
4.4 Owners or operators may use the sample checklist in Appendix X1 to assist them in determining operational conformance or they may develop their own checklist based upon this guide.
4.5 This guide and accompanying appendixes are not intended to be used by state or local UST program authorities as a regulatory or administrative requirement for owners or operators. Use of this guide and appendixes by owners and operators is intended to be a voluntary educational tool for the purposes described in 4.1.
SCOPE
1.1 This guide covers information for evaluating tank systems for operational conformance with the Federal technical standards (including the financial responsibility requirements) for underground storage tanks (USTs) found at 40 Code of Federal Register (CFR) Part 280.
1.2 This guide does not address the corrective action requirements of 40 CFR Part 280.
1.3 To the extent that a tank system is excluded or deferred from the federal regulations under Subpart A of 40 CFR Part 280, it is not covered by this guide.
1.4 Local regulations may be more stringent than federal regulation and the reader should refer to the implementing agency to determine compliance.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide12 pagesEnglish languagesale 15% off
- Guide12 pagesEnglish languagesale 15% off
ABSTRACT
This specification covers design requirements, manufacturing practices, and performance requirements for monolithic or sectional precast concrete grease interceptor tanks. This standard describes precast concrete tanks installed to separate fats, oils, grease, soap scum, and other typical kitchen wastes associated with the food service industry. The different materials and manufacturing practices of precast concrete grease interceptor tanks are presented in details. Structural design of grease interceptor tanks shall be by calculation or by performance. The different structural design requirement of grease interceptor tanks includes; concrete strength, reinforcing steel placement, and openings. The different physical design requirements of grease interceptor tanks includes; capacity, shape, compartments, inlet and outlet pipes, baffles and outlet devices, and top slab openings. Testing for watertightness shall be performed using either vacuum testing or hydrostatic testing.
SCOPE
1.1 This specification covers design requirements, manufacturing practices, and performance requirements for monolithic or sectional precast concrete grease interceptor tanks.
1.2 This specification describes precast concrete tanks installed to separate fats, oils, grease, soap scum, and other typical kitchen wastes associated with the food service industry.
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Technical specification5 pagesEnglish languagesale 15% off
- Technical specification5 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
4.1 Environmentally sound management of underground storage tank systems involves a broad range of preventative maintenance activities directed toward preventing accidental releases of regulated substances, and effectively detecting and responding to such releases when, and if, they do occur. Numerous technical guidelines are presently available addressing specific procedures for release prevention and response for underground tank systems, including guidelines for tank system design, installation, operation and maintenance, leak detection, spill control, periodic equipment inspections, corrective action for affected environmental media, tank system closure, and operator training. This guide presents an overview, identifying key management considerations and referring the user to other related ASTM standards and industry guidelines for more detailed information.
4.2 Tank System Design and Installation—The first step in environmentally sound management of tank systems is to design and install the tank system so as to minimize the potential for release of regulated substances to the environment. This guide addresses key considerations related to the types of tank systems to be used, compatibility of regulated substances to construction materials, types of spill containment and overfill prevention devices, corrosion protection, leak detection proper installation practices, and system operation.
4.3 Preventative Maintenance—Even for properly designed and installed tank systems, practical measures are needed to detect and terminate leaks and respond to releases in a timely manner so as to minimize regulated substance losses and associated environmental effects. This guide reviews general considerations including release detection measures, possible indicators of a release, appropriate record-keeping procedures, tank system inspection, equipment testing, response planning and release control measures. Some preventative maintenance activities are recommended while ot...
SCOPE
1.1 The framework discussed in this guide is limited to facilities with underground storage tanks (USTs) storing regulated substances at ambient temperature and atmospheric pressure. This guide is not intended to provide detailed technical specifications for implementation of the approaches described in this document, nor to be used as an enforcement tool, but rather to identify the important information used for environmental management of underground tank systems. The term “must” is used where United States federal requirements apply. References to ASTM standards and other industry guidelines have been provided to address implementation of the approaches discussed in this guide. Many states and some local agencies have adopted rules that place additional responsibilities on the owners/operators of UST systems. Refer to state and local regulations that may contain additional requirements. It is not possible to identify all considerations or combinations of conditions pertinent to a unique underground storage tank system.
1.2 This guide addresses principal considerations related to the prevention of, and response to environmental releases from tank systems and is organized in the sections listed below:
Section 1:
Scope
Section 2:
Lists relevant ASTM Standards and other industry or regulatory guidance documents
Section 3:
Defines the key terminology used in this guide
Section 4:
Describes the significance and use of this guide
Section 5:
Tank System Design and Installation
Section 6:
Preventive Maintenance and Inspection Plan
Section 7:
Fueling Procedure
Section 8:
Dispensing Activities
Section 9:
Release Response Plan
Section 10:
Corrective Action for Affected Environmental Media
Section 11:
Tank System Closure
Section 12:
UST Management Practice and Operator Training
Appendix X1:
Recurring Release Det...
- Guide19 pagesEnglish languagesale 15% off
- Guide19 pagesEnglish languagesale 15% off
SIGNIFICANCE AND USE
4.1 This guide is an educational tool for tank owners, operators, and other users and is not intended for use in certifying compliance with the Federal technical standards for underground storage tanks.
4.2 The intent of this guide is to provide an overview of the general requirements. This guide is intended for users who are generally familiar with the requirements of 40 CFR Part 280. The user is advised that this guide does not contain the level of detail necessary to make the determination of whether specific equipment or services meet the detailed technical performance requirements of 40 CFR Part 280.
4.3 This guide does not cover state and local requirements, that can be more stringent than the federal rules. Owners and operators are responsible for meeting federal, state, and, in some circumstances, local requirements. It is recommended that owners and operators familiarize themselves with these requirements as well.
4.4 Owners or operators may use the sample checklist in Appendix X1 to assist them in determining operational conformance or they may develop their own checklist based upon this guide.
4.5 This guide and accompanying appendixes are not intended to be used by state or local UST program authorities as a regulatory or administrative requirement for owners or operators. Use of this guide and appendixes by owners and operators is intended to be a voluntary educational tool for the purposes described in 4.1.
SCOPE
1.1 This guide covers information for evaluating tank systems for operational conformance with the Federal technical standards (including the financial responsibility requirements) for underground storage tanks (USTs) found at 40 Code of Federal Register (CFR) Part 280.
1.2 This guide does not address the corrective action requirements of 40 CFR Part 280.
1.3 To the extent that a tank system is excluded or deferred from the federal regulations under Subpart A of 40 CFR Part 280, it is not covered by this guide.
1.4 Local regulations may be more stringent than federal regulation and the reader should refer to the implementing agency to determine compliance.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Guide12 pagesEnglish languagesale 15% off
- Guide12 pagesEnglish languagesale 15% off
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.