ASTM D3666-09a
(Specification)Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
ABSTRACT
This specification covers the minimum requirements for field and laboratory personnel, for establishing and maintaining a quality system, and establishes minimum qualifications for agencies engaged in the testing and inspection of road and paving materials. This specification can be used as a basis to evaluate testing or inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of road and paving materials. Criteria are provided for evaluating the capability of an agency to properly perform designated tests on road and paving materials, and for establishing guidelines pertaining to an agency's organization, personnel, facilities, and quality system.
SIGNIFICANCE AND USE
This specification provides the basic minimum criteria for use in evaluating the qualifications of testing or inspection agencies, or both, for road and paving materials. The criteria may be supplemented by more specific criteria and requirements. An individual user can also use it to judge the qualification of an agency.
The intent of this specification is to provide a consensus basis for evaluating a testing or inspection agency, or both, with respect to that agency's capability to objectively and competently provide the specific services needed by the user.
This specification can be used as a basis for accreditation.
SCOPE
1.1 This specification covers the minimum requirements for field and laboratory personnel, for establishing and maintaining a quality system, and establishes minimum qualifications for agencies engaged in the testing and inspection of road and paving materials.
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on road and paving materials, and for establishing guidelines pertaining to an agency's organization, personnel, facilities, and quality system. This specification may be supplemented by more specific criteria, such as that in Specification E329, and requirements for particular projects.
1.3 This specification can be used as a basis to evaluate testing or inspection agencies, or both, and is intended for use for the qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of road and paving materials.
1.4 Accreditation is required to comply with this standard. (See 8.1.5.)
1.5 The users of the accredited agency must review the agency's scope of accreditation to ensure the agency has been accredited for its technical competence to perform the tasks requested by the user.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D3666 – 09a
Standard Specification for
Minimum Requirements for Agencies Testing and Inspecting
1
Road and Paving Materials
This standard is issued under the fixed designation D3666; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope tion applies, as appropriate, to all test methods under the
jurisdiction of Committee D04.
1.1 This specification covers the minimum requirements for
2
2.2 ASTM Standards:
fieldandlaboratorypersonnel,forestablishingandmaintaining
D5 Test Method for Penetration of Bituminous Materials
a quality system, and establishes minimum qualifications for
D8 Terminology Relating to Materials for Roads and Pave-
agencies engaged in the testing and inspection of road and
3
ments
paving materials.
D36 Test Method for Softening Point of Bitumen (Ring-
1.2 Criteria are provided for evaluating the capability of an
and-Ball Apparatus)
agencytoproperlyperformdesignatedtestsonroadandpaving
D70 Test Method for Density of Semi-Solid Bituminous
materials, and for establishing guidelines pertaining to an
Materials (Pycnometer Method)
agency’sorganization,personnel,facilities,andqualitysystem.
D92 Test Method for Flash and Fire Points by Cleveland
This specification may be supplemented by more specific
Open Cup Tester
criteria, such as that in Specification E329, and requirements
D113 Test Method for Ductility of Bituminous Materials
for particular projects.
D139 Test Method for Float Test for Bituminous Materials
1.3 This specification can be used as a basis to evaluate
D244 Test Methods and Practices for Emulsified Asphalts
testing or inspection agencies, or both, and is intended for use
D1074 Test Method for Compressive Strength of Bitumi-
for the qualifying or accrediting, or both, of testing or
nous Mixtures
inspection agencies, public or private, engaged in the testing
D1075 Test Method for Effect of Water on Compressive
and inspection of road and paving materials.
Strength of Compacted Bituminous Mixtures
1.4 Accreditation is required to comply with this standard.
D1560 Test Methods for Resistance to Deformation and
(See 8.1.5.)
Cohesion of Bituminous Mixtures by Means of Hveem
1.5 The users of the accredited agency must review the
Apparatus
agency’s scope of accreditation to ensure the agency has been
D1561 Practice for Preparation of Bituminous Mixture Test
accredited for its technical competence to perform the tasks
Specimens by Means of California Kneading Compactor
requested by the user.
D1754 TestMethodforEffectsofHeatandAironAsphaltic
1.6 This standard does not purport to address all of the
Materials (Thin-Film Oven Test)
safety concerns, if any, associated with its use. It is the
D1856 Test Method for Recovery ofAsphalt From Solution
responsibility of the user of this standard to establish appro-
by Abson Method
priate safety and health practices and determine the applica-
D2170 Test Method for Kinematic Viscosity of Asphalts
bility of regulatory limitations prior to use.
(Bitumens)
2. Referenced Documents D2171 Test Method for Viscosity of Asphalts by Vacuum
Capillary Viscometer
2.1 The following referenced documents are those that are
D2872 Test Method for Effect of Heat andAir on a Moving
specifically mentioned in this specification. These referenced
Film of Asphalt (Rolling Thin-Film Oven Test)
documents are not meant to be all inclusive, as this specifica-
1 2
This specification is under the jurisdiction of ASTM Committee D04 on Road For referenced ASTM standards, visit the ASTM website, www.astm.org, or
and Paving Materials and is the direct responsibility of Subcommittee D04.95 on contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Quality Control, Inspection and Testing Agencies. Standards volume information, refer to the standard’s Document Summary page on
Current edition approved Dec. 1, 2009. Published January 2010. Originally the ASTM website.
3
approved in 1978. Last previous edition approved in 2009 as D3666 – 09. DOI: Withdrawn. The last approved version of this historical standard is referenced
10.1520/D3666-09A. on www.astm.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
D3666 – 09a
D3143 TestMethodforFlashPointofCutbackAsphaltwith national or international standards, through an unbroken chain
Tag Open-Cup Apparatus of comparisons all having stated uncertainties.
D5506 Practice for Organizations Engaged in the Certifica-
3.
...
This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:D3666–09 Designation: D3666 – 09a
Standard Specification for
Minimum Requirements for Agencies Testing and Inspecting
1
Road and Paving Materials
This standard is issued under the fixed designation D3666; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope
1.1 This specification covers the minimum requirements for field and laboratory personnel, for establishing and maintaining a
quality system, and establishes minimum qualifications for agencies engaged in the testing and inspection of road and paving
materials.
1.2 Criteria are provided for evaluating the capability of an agency to properly perform designated tests on road and paving
materials, and for establishing guidelines pertaining to an agency’s organization, personnel, facilities, and quality system. This
specification may be supplemented by more specific criteria, such as that in Specification E329, and requirements for particular
projects.
1.3 This specification can be used as a basis to evaluate testing or inspection agencies, or both, and is intended for use for the
qualifying or accrediting, or both, of testing or inspection agencies, public or private, engaged in the testing and inspection of road
and paving materials.
1.4 Accreditation is required to comply with this standard. (See 8.1.5.)
1.5 Theusersoftheaccreditedagencymustreviewtheagency’sscopeofaccreditationtoensuretheagencyhasbeenaccredited
for its technical competence to perform the tasks requested by the user.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
2.1 The following referenced documents are those that are specifically mentioned in this specification. These referenced
documents are not meant to be all inclusive, as this specification applies, as appropriate, to all test methods under the jurisdiction
of Committee D04.
2
2.2 ASTM Standards:
D5 Test Method for Penetration of Bituminous Materials
D8 Terminology Relating to Materials for Roads and Pavements
D36 Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
D70 Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D113 Test Method for Ductility of Bituminous Materials
D139 Test Method for Float Test for Bituminous Materials
D244 Test Methods and Practices for Emulsified Asphalts
D1074 Test Method for Compressive Strength of Bituminous Mixtures
D1075 Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
D1560 Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
D1561 Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
1
This specification is under the jurisdiction ofASTM Committee D04 on Road and Paving Materials and is the direct responsibility of Subcommittee D04.95 on Quality
Control, Inspection and Testing Agencies.
´1
Current edition approved June 1, 2009. Published July 2009. Originally approved in 1978. Last previous edition approved in 2007 as D3666–07 . DOI:
10.1520/D3666-09.
Current edition approved Dec. 1, 2009. Published January 2010. Originally approved in 1978. Last previous edition approved in 2009 as D3666 – 09. DOI:
10.1520/D3666-09A.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
D3666 – 09a
D1754 Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
D1856 Test Method for Recovery of Asphalt From Solution by Abson Method
D2170 Test Method for Kinematic Viscosity of Asphalts (Bitumens)
D2171 Test Method for Viscosity of Asphalts by Vacuum Cap
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.