iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D6368-05

(Specification)

Standard Specification for Vapor-Degreasing Grade and General Grade normal-Propyl Bromide

Standard Specification for Vapor-Degreasing Grade and General Grade <bdit>normal</bdit>-Propyl Bromide

SCOPE
1.1 This specification covers vapor-degreasing grade and general solvent grade normal-propyl bromide (nPB). High-purity grades of nPB are available but should not be evaluated by this specification.
1.2 Blends and azeotropic mixtures of  nPB for vapor-degreasing and general solvent grades should be blended from nPB meeting this specification.
Note 1—Practices D 3844 and D 4276 and MNL2 ²provide additional important information on vapor degreasing and solvent properties.

General Information

Status
Historical
Publication Date
31-May-2005
ICS
71.080.20 - Halogenated hydrocarbons
Technical Committee
D26 - Halogenated Organic Solvents and Fire Extinguishing Agents
Drafting Committee
D26.02 - Vapor Degreasing
Current Stage
Ref Project

Relations

Replaces
ASTM D6368-02 - Standard Specification for Vapor-Degreasing Grade and General Grade <i>normal</i>-Propyl Bromide
Effective Date
01-Jun-2005
Replaced By
ASTM D6368-06 - Standard Specification for Vapor-Degreasing Solvents Based on <bdit>normal</bdit>-Propyl Bromide and Technical Grade <bdit>normal</bdit>-Propyl Bromide
Effective Date
01-Jun-2006
Referred By
ASTM D2172/D2172M-17e1 - Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures
Effective Date
01-Jun-2005
Referred By
ASTM D7553-15(2021) - Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
Effective Date
01-Jun-2005
Referred By
ASTM D1856-21 - Standard Test Method for Recovery of Asphalt from Solution by Abson Method
Effective Date
01-Jun-2005
Referred By
ASTM D5404/D5404M-21 - Standard Practice for Recovery of Asphalt Binder from Solution Using the Rotary Evaporator
Effective Date
01-Jun-2005

Buy Standard

ASTM D6368-05 - Standard Specification for Vapor-Degreasing Grade and General Grade <bdit>normal</bdit>-Propyl BromideASTM D6368-05 - Standard Specification for Vapor-Degreasing Grade and General Grade <bdit>normal</bdit>-Propyl Bromide
PreviousNext
Technical specification
ASTM D6368-05 - Standard Specification for Vapor-Degreasing Grade and General Grade <bdit>normal</bdit>-Propyl Bromide
English language
2 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
An American National Standard
Designation: D 6368 – 05
Standard Specification for
Vapor-Degreasing Grade and General Grade normal-Propyl
1
Bromide
This standard is issued under the fixed designation D 6368; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope Solvents and Their Admixtures
D 3741 Test Method for Appearance of Admixtures Con-
1.1 This specification covers vapor-degreasing grade and
taining Halogenated Organic Solvents
general solvent grade normal-propyl bromide (nPB). High-
D 3844 Practice for Labeling Halogenated Hydrocarbon
purity grades of nPB are available but should not be evaluated
Solvent Containers
by this specification.
D 4276 Practice for Confined Area Entry
1.2 Blends and azeotropic mixtures of nPB for vapor-
D 4755 Test Method for Free Halogens in Halogenated
degreasing and general solvent grades should be blended from
Organic Solvents and Their Admixtures
nPB meeting this specification.
D 6505 Test Method for Assay of normal-Propyl Bromide
2
NOTE 1—Practices D 3844 and D 4276 and MNL2 provide additional
Content
important information on vapor degreasing and solvent properties.
4
2.2 Other Documents:
29 CFR 1919.1200 Department of Labor, OSHA Regula-
2. Referenced Documents
4
tions on Hazard Communications
3
2.1 ASTM Standards:
49 CFR 100 to 199 Department of Transportation Hazard-
D 1078 Test Method for Distillation Range of Volatile
ous Materials Regulations
Organic Liquids
D 2108 Test Method for Color of Halogenated Organic
3. Properties
Solvents and Their Admixtures (Platinum-Cobalt Scale)
3.1 Vapor degreasing grade and general solvent grade
D 2109 Test Methods for Nonvolatile Matter in Haloge-
normal-propyl bromide shall conform to the requirements
nated Organic Solvents and Their Admixtures
prescribed in Table 1. The metal corrosion tests described in
D 2111 Test Methods for Specific Gravity of Halogenated
Test Method D 2251 (test at reflux temperature only) shall be
Organic Solvents and Their Admixtures
performed with aluminum (Al 1100). It is recommended, but
D 2251 Test Method for Metal Corrosion by Halogenated
not a requirement of this specification, that this test also be
Organic Solvents and Their Admixtures
carried out by the end user on all metal alloys expected to
D 2942 Test Method for Total Acid Acceptance of Haloge-
contact the solvent during the intended storage and use.
nated Organic Solvents (Nonreflux Method)
D 2989 Test Method for Acidity-Alkalinity of Halogenated
4. Packaging
Organic Solvents and Their Admixtures
4.1 Industrial or commercial quantities shall be packaged
D 3401 Test Methods for Water in Halogenated Organic
and labeled in accordance with DOTregulations as found in 49
CFR 100 to 199 and state and local regulations, and with
OSHA Regulations found in 29 CFR 1910.1200.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D5960-03(2023)(Specification)
Standard Specification for Technical Grade Ethylene Dichloride

ABSTRACT
This specification covers technical grade ethylene dichloride. Technical grade ethylene dichloride shall conform to the requirements prescribed. The color, ethylene dichloride content, specific gravity, acidity, and water content shall be tested to meet the requirements prescribed.
SCOPE
1.1 This specification covers technical grade ethylene dichloride.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D5395-03(2023)(Specification)
Standard Specification for Reclaimed Methylene Chloride

ABSTRACT
This specification covers reclaimed methylene chloride used in various industries for noncritical applications. Tests for specific gravity, acidity, water content, appearance, color, nonvolatile residue, chloride content, assay, and 1,1,1-trichloroethane content shall be performed and shall conform to the requirements specified.
SCOPE
1.1 This specification covers the grade of methylene chloride typically needed in various industries for noncritical applications, such as in paint stripping formulations. It may be used as a reference document by purchasers or by persons establishing in-house methylene chloride recovery programs.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D6368-06(2023)(Specification)
Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide

ABSTRACT
This specification covers solvents based on stabilized normal-propyl bromide (nPB) for use in vapor degreasing. The standard also includes a separate specification for technicalgraden-propyl bromide. Blends and azeotropic mixtures of stabilized nPB for vapor-degreasing shall be blended from nPB meeting the specification for technical-grade nPB. Vapor-degreasing solvents based on stabilized normalpropyl bromide shall conform to the requirements of different properties such as boiling point, acidity, water content, appearance, color, free halogen, nonvolatile residue, acid acceptance, and aluminum corrosion at reflux. Blends and azeotropic mixtures of stabilized nPB with other materials for use in vapor degreasing shall be prepared from technical-grade nPB which shall conform also to requirements of different properties such as: specific gravity, boiling point, acidity, water content, appearance, color, free halogen, nonvolatile residue, normal-propyl bromide content, and iso-propyl bromide content.
SCOPE
1.1 This standard covers solvents based on stabilized normal-propyl bromide (nPB) for use in vapor degreasing. The standard also includes a separate specification for technical-grade n-propyl bromide.  
1.2 Blends and azeotropic mixtures of stabilized nPB for vapor-degreasing shall be blended from nPB meeting the specification for technical-grade nPB.
Note 1: Guide D3844, Practice D4276, and MNL22 provide additional important information on vapor degreasing and solvent properties.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2109-01(2022)(Test Method)
Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures

SIGNIFICANCE AND USE
3.1 Nonvolatile matter in solvents can adversely affect their cleaning properties. These test methods can be used to control soil contamination in the boiling solvent, which if allowed to become too high, can decrease the stability of the solvent.  
3.2 These test methods can be used to establish manufacturing and purchasing specifications.
SCOPE
1.1 These test methods cover the determination of nonvolatile matter in halogenated organic solvents and admixtures.  
1.2 Five test methods are covered, as follows:  
1.2.1 Test Method A—For halogenated organic solvents or admixtures having less than 50 ppm nonvolatile matter; or where precision better than ±10 ppm is required.  
1.2.2 Test Method B—For halogenated organic solvents or admixtures having more than 50 ppm nonvolatile matter or where precision of ±0.001 % (10 ppm) is satisfactory.  
1.2.3 Test Method C—For low-boiling halogenated organic solvents or their admixtures (for example, methylene chloride, trichlorotrifluoroethane) that may superheat and cause bumping while evaporating to dryness with steam. A precision of greater than ±10 ppm can be attained.  
1.2.4 Test Method D—For rapid measurement of nonvolatile matter in halogenated organic solvents and their admixtures and where precision better than ±10 ppm is required.  
1.2.5 Test Method E—For halogenated organic solvents or admixtures and where precision better than ±10 ppm is required.  
1.3 The values stated in SI units are to be regarded as standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D6505-00(2022)(Test Method)
Standard Test Method for Assay of normal-Propyl Bromide Content

SIGNIFICANCE AND USE
3.1 This test method provides an analysis in weight percent of the normal-propyl bromide concentration of virgin, formulated, or reclaimed normal-propyl bromide: compounds that co-elute with normal-propyl bromide or normal-heptane (internal standard) may interfere with this test method.
SCOPE
1.1 This test method provides a basis for the determination of the normal-propyl bromide (weight %) in the presence of stabilizers and impurities, in virgin or reclaimed normal-propyl bromide (nPB). The application range is from 50 wt % to 100 wt %.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2989-01(2022)(Test Method)
Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures

SIGNIFICANCE AND USE
4.1 This test method can be used to establish manufacturing and purchasing specifications. It can also be used to determine the condition of solvents in use.
SCOPE
1.1 This test method covers the determination of acidity in halogenated organic solvents and admixtures thereof. The alkalinity may be determined utilizing Test Methods D2106, by substituting the end point measured at pH 7 by bromothymol blue or pH meter.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D2110-00(2022)(Test Method)
Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures

SIGNIFICANCE AND USE
3.1 The pH of halogenated solvents varies according to the nature of stabilizers in the particular solvent. Solvents with alkaline stabilizers (amine-types) generally have pHs in the 7 to 11 range, whereas solvents containing neutral stabilizers (epoxide-types) generally have pHs in the 5 to 7 range.  
3.2 Virgin and reclaimed solvents should have pHs within these ranges, dependent upon the claimed method of stabilization. These values should be within the accepted limits as proposed by the producers of the original virgin solvent.  
3.3 A lowering of pH from the above values, on receipt or use, is cause for concern. In this event, solvents having epoxide stabilizers should be tested for acid acceptance; solvent having alkaline stabilizers should be tested for alkalinity.
SCOPE
1.1 This test method covers the measurement of the pH of water extractions of halogenated organic solvents and admixtures thereof. This test method is applicable for the determination of the pH of water extractions of virgin, reclaimed, or used solvents.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    2 pages
    English language
    sale 15% off
ASTM
ASTM D4079-00(2022)(Specification)
Standard Specification for Vapor-Degreasing Grade Methylene Chloride

ABSTRACT
This specification covers vapor-degreasing grade methylene chloride. Vapor-degreasing grade methylene chloride shall be subjected to different tests so as to determine properties such as specific gravity, distillation range at initial boiling point, distillation range at dry point, acidity, water content, appearance, color, nonvolatile residue, and acid acceptance.
SCOPE
1.1 This specification covers vapor-degreasing grade methylene chloride.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
Note 1: Guide D3844, Practice D4276, and MNL22 provide additional important information on vapor degreasing and solvent properties.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM D2106-07(2022)(Test Method)
Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents

SIGNIFICANCE AND USE
4.1 This test method is useful for the determination of the amount of acid acceptance contributed by amines or bases as compared to other acid-accepting compounds.
SCOPE
1.1 These test methods, where applicable, cover the determination of the acid acceptance of halogenated organic solvents due to the presence therein of an organic amine titratable by standard acid. These test methods are suitable for samples of 0.001 to 0.02 weight percent (10 ppm to 200 ppm) alkalinity as NaOH. Two test methods are covered as follows:  
1.1.1 Test Method A—pH Method, and  
1.1.2 Test Method B—Indicator Method.  
1.1.3 Test Method C—GC Method.  
1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D3401-97(2022)(Test Method)
Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures

SIGNIFICANCE AND USE
4.1 High water concentrations can have a detrimental effect on many uses of halogenated solvents.  
4.1.1 Water can cause corrosion and spotting when solvents are used for metal cleaning.  
4.1.2 Water can reduce the shelf life of aerosol formulations.  
4.1.3 Water can inhibit desired reactions when solvents are used in formulations.
SCOPE
1.1 These test methods describe the use of the Karl Fischer (KF) titration for determination of water in halogenated organic solvents and mixtures thereof. Water concentrations from 2 ppm to 1000 ppm can be determined in these solvents. Two test methods are covered as follows:  
1.1.1 Test Method A, Water Determination Using a Coulometric KF Titrator—The coulometric test method is known for its high degree of sensitivity (typically 2O) and should be the test method of choice if water concentrations are typically below 50 ppm or if only small amounts of sample are available for water determinations. This test method requires the use of equipment specifically designed for coulometric titrations.  
1.1.2 Test Method B, Water Determination Using a Volumetric KF Titrator—The volumetric test method is a more traditional approach to KF water determinations. Although titrators are specifically designed for KF volumetric determinations, many automatic titrators on the market can be adapted to perform KF titrations.  
1.2 Either of these test methods can be used to determine typical water concentrations (15 ppm to 500 ppm) found in halogenated solvents.  
1.3 These test methods recommend the use of commercially available Karl Fischer titrators and reagents.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Sections 11 and 15.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    5 pages
    English language
    sale 15% off