ASTM B619/B619M-19
(Specification)Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe
ABSTRACT
This specification covers welded pipe of nickel and nickel-cobalt alloys (UNS N10001; UNS N10242; UNS N10665; UNS N12160; UNS N10624; UNS N10629; UNS N10675; UNS N10276; UNS N06455; UNS N06007; UNS N06975; UNS N08320; UNS 06002; UNS N06022; UNS N06035; UNS N06058; UNS N06059; UNS N06200; UNS N06985; UNS N06030; UNS R30556; UNS N08031; UNS N06230; UNS N06686; UNS N06210; and UNS R20033). Two classes of pipe are covered as Class I which is as welded and solution annealed or welded and sized and solution annealed; and Class II which is welded, cold worked, and solution annealed. All pipes shall be furnished in the solution annealed and descaled condition. The pipe shall be made from flat-rolled alloy by an automatic welding process with no addition of filler metal. Subsequent to welding and prior to final heat treatment, Class II pipes shall be cold worked either in both weld and base metal or in weld metal only. The material shall conform to the composition limits set by this specification. Tensile strength, yield strength and elongation of the material shall conform to the mechanical requirements. Tension test, flattening test, transverse guided bend test, and hydrostatic or nondestructive electric test shall be performed.
SCOPE
1.1 This specification2 covers welded pipe of nickel and nickel-cobalt alloys (UNS N10001; UNS N10242; UNS N10665; UNS N12160; UNS N10624; UNS N10629; UNS N10675; UNS N10276; UNS N06455; UNS N06007; UNS N06975; UNS N08320; UNS N06002; UNS N06022; UNS N06035; UNS N06044; UNS N06058; UNS N06059; UNS N06200; UNS N06235; UNS N10362; UNS N06985; UNS N06030; UNS R30556; UNS N08031; UNS N08034; UNS N06230; UNS N06686; UNS N06210; and UNS R20033)3 as shown in Table 1.
1.2 This specification covers pipe in Schedules 5S, 10S, 40S, and 80S through 8-in. nominal pipe size and larger as set forth in ANSI B36.19 (see Table 2).
1.3 Two classes of pipe are covered as follows:
1.3.1 Class I—As welded and solution annealed or welded and sized and solution annealed.
1.3.2 Class II—Welded, cold worked, and solution annealed.
1.4 All pipe shall be furnished in the solution annealed and descaled condition. When atmosphere control is used, descaling is not necessary.
1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Buy Standard
Standards Content (Sample)
This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation:B619/B619M −19
Standard Specification for
1
Welded Nickel and Nickel-Cobalt Alloy Pipe
This standard is issued under the fixed designation B619/B619M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* Safety Data Sheet (SDS) for this product/material as provided
2
by the manufacturer, to establish appropriate safety, health,
1.1 This specification covers welded pipe of nickel and
and environmental practices, and determine the applicability
nickel-cobalt alloys (UNS N10001; UNS N10242; UNS
of regulatory limitations prior to use.
N10665; UNS N12160; UNS N10624; UNS N10629; UNS
1.7 This international standard was developed in accor-
N10675; UNS N10276; UNS N06455; UNS N06007; UNS
dance with internationally recognized principles on standard-
N06975; UNS N08320; UNS N06002; UNS N06022; UNS
ization established in the Decision on Principles for the
N06035; UNS N06044; UNS N06058; UNS N06059; UNS
Development of International Standards, Guides and Recom-
N06200; UNS N06235; UNS N10362; UNS N06985; UNS
mendations issued by the World Trade Organization Technical
N06030; UNS R30556; UNS N08031; UNS N08034; UNS
3 Barriers to Trade (TBT) Committee.
N06230; UNS N06686; UNS N06210; and UNS R20033) as
shown in Table 1.
2. Referenced Documents
1.2 This specification covers pipe in Schedules 5S, 10S,
4
2.1 ASTM Standards:
40S, and 80S through 8-in. nominal pipe size and larger as set
B775 Specification for General Requirements for Nickel and
forth in ANSI B36.19 (see Table 2).
Nickel Alloy Welded Pipe
1.3 Two classes of pipe are covered as follows:
B899 Terminology Relating to Non-ferrous Metals and Al-
1.3.1 Class I—As welded and solution annealed or welded
loys
and sized and solution annealed.
E527 Practice for Numbering Metals and Alloys in the
1.3.2 Class II—Welded, cold worked, and solution an-
Unified Numbering System (UNS)
nealed.
5
2.2 ANSI Standards:
1.4 All pipe shall be furnished in the solution annealed and
B36.19 Stainless Steel Pipe
descaled condition. When atmosphere control is used, descal-
B2.1 Pipe Threads
ing is not necessary.
6
2.3 ASME Boiler and Pressure Vessel Code
1.5 The values stated in either SI units or inch-pound units
Section IX Welding and Brazing Qualifications
are to be regarded separately as standard. The values stated in
each system are not necessarily exact equivalents; therefore, to
3. Terminology
ensure conformance with the standard, each system shall be
3.1 For definitions of terms used in this standard refer to
used independently of the other, and values from the two
Terminology B899.
systems shall not be combined.
1.6 This standard does not purport to address all of the
4. General Requirement
safety concerns, if any, associated with its use. It is the
4.1 Material furnished under this specification shall con-
responsibility of the user of this standard to become familiar
form to the applicable requirements of Specification B775
with all hazards including those identified in the appropriate
unless otherwise provided herein.
1
This specification is under the jurisdiction of ASTM Committee B02 on
4
Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee For referenced ASTM standards, visit the ASTM website, www.astm.org, or
B02.07 on Refined Nickel and Cobalt and Their Alloys. contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Current edition approved Nov. 1, 2019. Published November 2019. Originally Standards volume information, refer to the standard’s Document Summary page on
approved in 1981. Last previous edition approved in 2017 as B619/B619M – 17b. the ASTM website.
5
DOI: 10.1520/B0619_B0619M-19. Available fromAmerican National Standards Institute (ANSI), 25 W. 43rd St.,
2
For ASME Boiler and Pressure Vessel Code applications see related Specifi- 4th Floor, New York, NY 10036, http://www.ansi.org.
6
cation SB-619 in Section II of that Code. Available from American Society of Mechanical Engineers (ASME), ASME
3
New designation established in accordance with Practice E527 and SAE J1086, International Headquarters, Three Park Ave., New York, NY 10016-5990, http://
Practice for Numbering Metals and Alloys (UNS). www.asme.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
B619/B6
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: B619/B619M − 17b B619/B619M − 19
Standard Specification for
1
Welded Nickel and Nickel-Cobalt Alloy Pipe
This standard is issued under the fixed designation B619/B619M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope*
2
1.1 This specification covers welded pipe of nickel and nickel-cobalt alloys (UNS N10001; UNS N10242; UNS N10665; UNS
N12160; UNS N10624; UNS N10629; UNS N10675; UNS N10276; UNS N06455; UNS N06007; UNS N06975; UNS N08320;
UNS N06002; UNS N06022; UNS N06035; UNS N06044; UNS N06058; UNS N06059; UNS N06200; UNS N06235; UNS
N10362; UNS N06985; UNS N06030; UNS R30556; UNS N08031; UNS N08034; UNS N06230; UNS N06686; UNS N06210;
3
and UNS R20033) as shown in Table 1.
1.2 This specification covers pipe in Schedules 5S, 10S, 40S, and 80S through 8-in. nominal pipe size and larger as set forth
in ANSI B36.19 (see Table 2).
1.3 Two classes of pipe are covered as follows:
1.3.1 Class I—As welded and solution annealed or welded and sized and solution annealed.
1.3.2 Class II—Welded, cold worked, and solution annealed.
1.4 All pipe shall be furnished in the solution annealed and descaled condition. When atmosphere control is used, descaling is
not necessary.
1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each
system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used
independently of the other, and values from the two systems shall not be combined.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet
(SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental
practices, and determine the applicability of regulatory limitations prior to use.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents
4
2.1 ASTM Standards:
B775 Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe
B899 Terminology Relating to Non-ferrous Metals and Alloys
E527 Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
5
2.2 ANSI Standards:
B36.19 Stainless Steel Pipe
B2.1 Pipe Threads
6
2.3 ASME Boiler and Pressure Vessel Code
Section IX Welding and Brazing Qualifications
1
This specification is under the jurisdiction of ASTM Committee B02 on Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee B02.07 on Refined
Nickel and Cobalt and Their Alloys.
Current edition approved Nov. 1, 2017Nov. 1, 2019. Published Nobember 2017November 2019. Originally approved in 1981. Last previous edition approved in 2017 as
B619/B619M – 17a.B619/B619M – 17b. DOI: 10.1520/B0619_B0619M-17b.10.1520/B0619_B0619M-19.
2
For ASME Boiler and Pressure Vessel Code applications see related Specification SB-619 in Section II of that Code.
3
New designation established in accordance with Practice E527 and SAE J1086, Practice for Numbering Metals and Alloys (UNS).
4
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
5
Available from American National Standards Institute (ANSI), 25 W. 43rd St., 4th Floor, New York, NY 10036, http://www.ansi.org.
6
Available from American Society of Mechanical Engineers (ASME), ASME International Headquarters, Three Park Ave., New York, NY 10016-5990, http://
www.asme.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
B619/B619M − 19
2
TABLE 1 Chemical Requirements
Composition Limits, %
Cb
Si
...
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: B619/B619M − 19
Standard Specification for
1
Welded Nickel and Nickel-Cobalt Alloy Pipe
This standard is issued under the fixed designation B619/B619M; the number immediately following the designation indicates the year
of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval.
A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope* Safety Data Sheet (SDS) for this product/material as provided
2 by the manufacturer, to establish appropriate safety, health,
1.1 This specification covers welded pipe of nickel and
and environmental practices, and determine the applicability
nickel-cobalt alloys (UNS N10001; UNS N10242; UNS
of regulatory limitations prior to use.
N10665; UNS N12160; UNS N10624; UNS N10629; UNS
1.7 This international standard was developed in accor-
N10675; UNS N10276; UNS N06455; UNS N06007; UNS
dance with internationally recognized principles on standard-
N06975; UNS N08320; UNS N06002; UNS N06022; UNS
ization established in the Decision on Principles for the
N06035; UNS N06044; UNS N06058; UNS N06059; UNS
Development of International Standards, Guides and Recom-
N06200; UNS N06235; UNS N10362; UNS N06985; UNS
mendations issued by the World Trade Organization Technical
N06030; UNS R30556; UNS N08031; UNS N08034; UNS
3 Barriers to Trade (TBT) Committee.
N06230; UNS N06686; UNS N06210; and UNS R20033) as
shown in Table 1.
2. Referenced Documents
1.2 This specification covers pipe in Schedules 5S, 10S,
4
2.1 ASTM Standards:
40S, and 80S through 8-in. nominal pipe size and larger as set
B775 Specification for General Requirements for Nickel and
forth in ANSI B36.19 (see Table 2).
Nickel Alloy Welded Pipe
1.3 Two classes of pipe are covered as follows:
B899 Terminology Relating to Non-ferrous Metals and Al-
1.3.1 Class I—As welded and solution annealed or welded
loys
and sized and solution annealed.
E527 Practice for Numbering Metals and Alloys in the
1.3.2 Class II—Welded, cold worked, and solution an-
Unified Numbering System (UNS)
nealed.
5
2.2 ANSI Standards:
1.4 All pipe shall be furnished in the solution annealed and
B36.19 Stainless Steel Pipe
descaled condition. When atmosphere control is used, descal-
B2.1 Pipe Threads
ing is not necessary.
6
2.3 ASME Boiler and Pressure Vessel Code
1.5 The values stated in either SI units or inch-pound units
Section IX Welding and Brazing Qualifications
are to be regarded separately as standard. The values stated in
each system are not necessarily exact equivalents; therefore, to
3. Terminology
ensure conformance with the standard, each system shall be
3.1 For definitions of terms used in this standard refer to
used independently of the other, and values from the two
Terminology B899.
systems shall not be combined.
1.6 This standard does not purport to address all of the
4. General Requirement
safety concerns, if any, associated with its use. It is the
4.1 Material furnished under this specification shall con-
responsibility of the user of this standard to become familiar
form to the applicable requirements of Specification B775
with all hazards including those identified in the appropriate
unless otherwise provided herein.
1
This specification is under the jurisdiction of ASTM Committee B02 on
4
Nonferrous Metals and Alloys and is the direct responsibility of Subcommittee For referenced ASTM standards, visit the ASTM website, www.astm.org, or
B02.07 on Refined Nickel and Cobalt and Their Alloys. contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
Current edition approved Nov. 1, 2019. Published November 2019. Originally Standards volume information, refer to the standard’s Document Summary page on
approved in 1981. Last previous edition approved in 2017 as B619/B619M – 17b. the ASTM website.
5
DOI: 10.1520/B0619_B0619M-19. Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
2
For ASME Boiler and Pressure Vessel Code applications see related Specifi- 4th Floor, New York, NY 10036, http://www.ansi.org.
6
cation SB-619 in Section II of that Code. Available from American Society of Mechanical Engineers (ASME), ASME
3
New designation established in accordance with Practice E527 and SAE J1086, International Headquarters, Three Park Ave., New York, NY 10016-5990, http://
Practice for Numbering Metals and Alloys (UNS). www.asme.org.
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
B619/B619M − 19
2
TABLE 1 Chemical Requirements
Composition Limits, %
Cb
Si P S Cb Ni+
Ni Cr Mo Fe W C Co Mn V Ti Cu (Nb) Al Zr La N B Ta Mg
max ma
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.