ASTM F2123-09
(Practice)Standard Practice for Treestand Instructions
Standard Practice for Treestand Instructions
SIGNIFICANCE AND USE
This practice is provided to develop and maintain uniformity in practices for instructions for treestands, particularly with regard to quality assurance and safety.
It is emphasized that the use of these practices will not alter the validity of data determined with specific tests related to other standards.
SCOPE
1.1 This practice provides guidance for providing user instructions for treestands.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F2123 − 09 AnAmerican National Standard
Standard Practice for
1
Treestand Instructions
This standard is issued under the fixed designation F2123; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope the tree at other locations and has steps that are used to reach
the platform or hunting position.
1.1 This practice provides guidance for providing user
instructions for treestands.
2.2.6 non-climbing, fixed position or hang-on treestand,
n—a treestand that is secured to the tree at the elevation where
1.2 The values stated in inch-pound units are to be regarded
it is used.
as standard. The values given in parentheses are mathematical
2.2.6.1 Discussion—The user usually ascends the tree by
conversions to SI units that are provided for information only
some means and then lifts the treestand to the desired position
and are not considered standard.
and secures it for use.
1.3 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the 2.2.7 platform, n—the horizontal structural area of a tree-
responsibility of the user of this standard to establish appro- stand on which the user stands or places his feet, or both.
priate safety and health practices and determine the applica-
2.2.8 treestand, n—a device designed to be affixed to a tree
bility of regulatory limitations prior to use.
or its branches so as to permit an individual to sit or stand
thereon for the purpose of attaining an elevated position from
2. Terminology
which to observe, photograph or hunt.
2.1 The terminology and definitions in the referenced docu-
2.2.9 tripod or tower stand, n—a tripod or tower stand (free
ments are applicable to this practice.
standing platform) is constructed to be self-supporting and is
2.2 Definitions:
not required to be secured to a tree.
2.2.1 backbar or V-bar, n—the adjustable component of a
2.2.10 suspension relief device, n—a device to allow relief
climbing treestand or handclimber that engages the tree to
of a person’s weight on the lower extremities if suspended in a
provide support. The backbar may be rigid or flexible.
harness.
2.2.2 climbing stick, n—a device to assist climbing a tree
2.2.10.1 Discussion—The device is to help maintain circu-
primarily to a fixed position treestand. A structure that is
lation in the legs and help prevent suspension trauma (blood
secured to the tree and allows the user to support his weight
pooling).
and climb to the desired height on the tree.
2.2.3 climbing treestand, n—a treestand that provides both
3. Summary of Practice
the means to ascend the tree, and allow the user to remain at a
3.1 This practice provides minimum guidelines for instruc-
desired elevation.
tions for treestands particularly for quality assurance and
2.2.4 handclimber, or climbing aid, n—a device to assist
adequacy of safety.
climbing with a climbing treestand.Astructure that allows the
user to support his weight when lifting a climbing treestand
4. Significance and Use
with his legs.
4.1 This practice is provided to develop and maintain
2.2.5 ladder treestand, n—a treestand that consists of a
uniformity in practices for instructions for treestands, particu-
ladder with an attached platform and is secured to the tree at
larly with regard to quality assurance and safety.
the elevation where the platform is located.
2.2.5.1 Discussion—The ladder treestand may be secured to
4.2 It is emphasized that the use of these practices will not
alter the validity of data determined with specific tests related
to other standards.
1
This practice is under the jurisdiction of ASTM Committee F08 on Sports
Equipment, Playing Surfaces, and Facilitiesand is the direct responsibility of
5. Procedure
Subcommittee F08.16 on Archery Products.
Current edition approved Feb. 1, 2009. Published February 2009. Originally
5.1 It is recommended that manufacturers follow the meth-
approved in 2001. Last previous edition approved in 2005 as F2123 – 05. DOI:
10.1520/F2123-09. ods of developing instructions so described herein. When
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F2123 − 09
unusual or special conditions require instructions or informa- 5.3.1.17 A signal device such as a mobile phone, radio,
tion not covered herein, the manufacturer shall be responsible whistle, signal flare or personal locator device (PLD) must be
for their development to assure adequate information for the on your person and readily available at all times.
user.
5.
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
An American National Standard
Designation:F2123–05 Designation: F 2123 – 09
Standard Practice for
1
Treestand Instructions
This standard is issued under the fixed designation F 2123; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice provides guidance for providing user instructions for treestands.
1.2The values stated are in inch-pound units and are to be regarded as standard.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Terminology
2.1 The terminology and definitions in the referenced documents are applicable to this practice.
2.2 Definitions:
2.2.1 backbar or V-barbackbar or V-bar, n—the adjustable component of a climbing treestand or handclimber that engages the
tree to provide support. The backbar may be rigid or flexible.
2.2.2 climbing stickclimbing stick, n—a device to assist climbing a tree primarily to a fixed position treestand.Astructure that
is secured to the tree and allows the user to support his weight and climb to the desired height on the tree.
2.2.3 climbing treestandclimbing treestand, n—a treestand that provides both the means to ascend the tree, and allow the user
to remain at a desired elevation.
2.2.4 handclimber, or climbing aidhandclimber, or climbing aid, n—a device to assist climbing with a climbing treestand. A
structure that allows the user to support his weight when lifting a climbing treestand with his legs.
2.2.5 ladder treestand, n—a treestand that consists of a ladder with an attached platform and is secured to the tree at the
elevation where the platform is located. (The
2.2.5.1 Discussion—The ladder treestand may be secured to the tree at other locations and has steps that are used to reach the
platform or hunting position.)
2.2.6 non-climbing, fixed position or hang-on treestand, n—a treestand that is secured to the tree at the elevation where it is
used. (The
2.2.6.1 Discussion—The user usually ascends the tree by some means and then lifts the treestand to the desired position and
secures it for use.) use.
2.2.7 platform, n—the horizontal structural area of a treestand on which the user stands and/oror places his feet, or both.
2.2.8 treestandtreestand, n—a device designed to be affixed to a tree or its branches so as to permit an individual to sit or stand
thereon for the purpose of attaining an elevated position from which to observe, photograph or hunt.
2.2.9 tripod or tower stand—a tripod or tower stand is constructed to be self-supporting and is not required to be secured to
a tree. tripod or tower stand, n—a tripod or tower stand (free standing platform) is constructed to be self-supporting and is not
required to be secured to a tree.
2.2.10 suspension relief device, n—a device to allow relief of a person’s weight on the lower extremities if suspended in a
harness.
2.2.10.1 Discussion—The device is to help maintain circulation in the legs and help prevent suspension trauma (blood pooling).
3. Summary of Practice
3.1 This practice provides minimum guidelines for the selection, content and placement of user instructions for treestands
particularly for quality assurance and adequacy of safety.
1
This practice is under the jurisdiction ofASTM Committee F08 on Sports Equipment and Facilities and is the direct responsibility of Subcommittee F08.16 onArchery
Products.
Current edition approved Oct. 15, 2005. Published October 2005. Originally approved in 2001. Last previous edition approved in 2001 as F2123–01.
Current edition approved Feb. 1, 2009. Published February 2009. Originally approved in 2001. Last previous edition approved in 2005 as F 2123 – 05.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
F2123–09
4. Significance and Use
4.1This practice is provided to develop and maintain un
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
An American National Standard
Designation:F2123–05 Designation: F 2123 – 09
Standard Practice for
1
Treestand Instructions
This standard is issued under the fixed designation F 2123; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice provides guidance for providing user instructions for treestands.
1.2The values stated are in inch-pound units and are to be regarded as standard.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Terminology
2.1 The terminology and definitions in the referenced documents are applicable to this practice.
2.2 Definitions:
2.2.1 backbar or V-barbackbar or V-bar, n—the adjustable component of a climbing treestand or handclimber that engages the
tree to provide support. The backbar may be rigid or flexible.
2.2.2 climbing stickclimbing stick, n—a device to assist climbing a tree primarily to a fixed position treestand.Astructure that
is secured to the tree and allows the user to support his weight and climb to the desired height on the tree.
2.2.3 climbing treestandclimbing treestand, n—a treestand that provides both the means to ascend the tree, and allow the user
to remain at a desired elevation.
2.2.4 handclimber, or climbing aidhandclimber, or climbing aid, n—a device to assist climbing with a climbing treestand. A
structure that allows the user to support his weight when lifting a climbing treestand with his legs.
2.2.5 ladder treestand, n—a treestand that consists of a ladder with an attached platform and is secured to the tree at the
elevation where the platform is located. (The
2.2.5.1 Discussion—The ladder treestand may be secured to the tree at other locations and has steps that are used to reach the
platform or hunting position.)
2.2.6 non-climbing, fixed position or hang-on treestand, n—a treestand that is secured to the tree at the elevation where it is
used. (The
2.2.6.1 Discussion—The user usually ascends the tree by some means and then lifts the treestand to the desired position and
secures it for use.) use.
2.2.7 platform, n—the horizontal structural area of a treestand on which the user stands and/oror places his feet, or both.
2.2.8 treestandtreestand, n—a device designed to be affixed to a tree or its branches so as to permit an individual to sit or stand
thereon for the purpose of attaining an elevated position from which to observe, photograph or hunt.
2.2.9 tripod or tower stand—a tripod or tower stand is constructed to be self-supporting and is not required to be secured to
a tree. tripod or tower stand, n—a tripod or tower stand (free standing platform) is constructed to be self-supporting and is not
required to be secured to a tree.
2.2.10 suspension relief device, n—a device to allow relief of a person’s weight on the lower extremities if suspended in a
harness.
2.2.10.1 Discussion—The device is to help maintain circulation in the legs and help prevent suspension trauma (blood pooling).
3. Summary of Practice
3.1 This practice provides minimum guidelines for the selection, content and placement of user instructions for treestands
particularly for quality assurance and adequacy of safety.
1
This practice is under the jurisdiction ofASTM Committee F08 on Sports Equipment and Facilities and is the direct responsibility of Subcommittee F08.16 onArchery
Products.
Current edition approved Oct. 15, 2005. Published October 2005. Originally approved in 2001. Last previous edition approved in 2001 as F2123–01.
Current edition approved Feb. 1, 2009. Published February 2009. Originally approved in 2001. Last previous edition approved in 2005 as F 2123 – 05.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
F2123–09
4. Significance and Use
4.1This practice is provided to develop and maintain un
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.