ASTM C110-09a

Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

ABSTRACT
These test methods cover physical testing of quicklime, hydrated lime, and limestone. Plastic property testing shall include test methods for standard consistency and plasticity of lime putty, water retention of hydrated lime, and air entrainment. Soundness testing shall include test methods for autoclave expansion, and popping and pitting of hydrated lime. Application testing shall include test methods for slaking rate of quicklime, dry brightness of pulverized limestone, limestone grindability determination by the laboratory ball mill method, and settling rate of hydrated lime. Particle size analysis shall include test methods for residue and sieve analysis, fineness of pulverized quicklime and hydrated lime by air permeability, particle size of pulverized limestone, and dry screening of hydrated lime, pulverized quicklime, and limestone by air jet sieving. Density measurement shall include the following test methods: apparent loose density, and apparent packed density of hydrated lime, pulverized quicklime, and limestone; specific gravity of hydrated lime products; and wet sieve analysis of agricultural liming materials.
SCOPE
1.1 These test methods cover physical testing of quicklime and hydrated lime, and of limestone not otherwise covered in ASTM standards.
Note 1—Quicklime and hydrated lime have a high affinity for moisture and carbon dioxide. Caution should be taken to protect both hydrated and quicklime during sampling, storage, and testing (see Practice C 50).  
1.2 The test procedures appear in the following order:
  Section   Air Entrainment 8 Apparent Loose Density of Hydrated Lime, Pulverized
Quicklime, and Limestone  
20 Apparent Packed Density of Hydrated Lime, Pulverized
Quicklime, and Limestone  
21 Autoclave Expansion of Hydrated Lime  9 Dry Brightness of Pulverized Limestone 12 Dry Screening by Air Jet Sieve 18 Fineness of Pulverized Quicklime and Hydrated Lime by Air
Permeability
16 Limestone Grindability 13 Particle Size of Pulverized Limestone 17 Plasticity of Lime Putty  6 Popping and Pitting of Hydrated Lime  10 Residue and Sieve Analysis  15 Settling Rate of Hydrated Lime14 Slaking Rate of Quicklime 11 Specific Gravity of Hydrated Lime Products22 Standard Consistency of Lime Putty  5 Water Retention of Hydrated Lime 7 Wet Sieve Analysis of Agricultural Liming Materials19
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

General Information

• Status: Historical
• Publication Date: 14-Jun-2009
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: C07 - Lime and Limestone
• Drafting Committee: C07.06 - Physical Tests

Relations

• Replaces: ASTM C110-09 - Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
• Effective Date: 15-Jun-2009
• Replaced By: ASTM C110-10 - Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
• Effective Date: 01-Dec-2010
• Referred By: ASTM C1318-15a(2020) - Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
• Effective Date: 15-Jun-2009
• Referred By: ASTM C1164-22 - Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
• Effective Date: 15-Jun-2009
• Referred By: ASTM C911-19 - Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
• Effective Date: 15-Jun-2009
• Referred By: ASTM C206-14(2022) - Standard Specification for Finishing Hydrated Lime
• Effective Date: 15-Jun-2009
• Referred By: ASTM C1707-18 - Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
• Effective Date: 15-Jun-2009
• Referred By: ASTM C141/C141M-14(2022) - Standard Specification for Hydrated Hydraulic Lime for Structural Purposes
• Effective Date: 15-Jun-2009
• Referred By: ASTM D5759-12(2020) - Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
• Effective Date: 15-Jun-2009
• Referred By: ASTM C977-18 - Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
• Effective Date: 15-Jun-2009
• Referred By: ASTM C1529-19 - Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
• Effective Date: 15-Jun-2009
• Referred By: ASTM C737-22 - Standard Specification for Limestone for Dusting of Coal Mines
• Effective Date: 15-Jun-2009
• Referred By: ASTM C5-18 - Standard Specification for Quicklime for Structural Purposes
• Effective Date: 15-Jun-2009
• Referred By: ASTM D5050-08(2023) - Standard Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts
• Effective Date: 15-Jun-2009
• Referred By: ASTM D6249-19 - Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
• Effective Date: 15-Jun-2009

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: C110 – 09a
Standard Test Methods for
Physical Testing of Quicklime, Hydrated Lime, and
1
Limestone
This standard is issued under the fixed designation C110; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope* priate safety and health practices and determine the applica-
bility of regulatory limitations prior to use.
1.1 These test methods cover physical testing of quicklime
and hydrated lime, and of limestone not otherwise covered in
2. Referenced Documents
2
ASTM standards.
3
2.1 ASTM Standards:
NOTE 1—Quicklimeandhydratedlimehaveahighaffinityformoisture
C28/C28M Specification for Gypsum Plasters
and carbon dioxide. Caution should be taken to protect both hydrated and
C50 Practice for Sampling, Sample Preparation, Packaging,
quicklime during sampling, storage, and testing (see Practice C50).
and Marking of Lime and Limestone Products
1.2 The test procedures appear in the following order:
C51 Terminology Relating to Lime and Limestone (as used
Section
by the Industry)
C91 Specification for Masonry Cement
Air Entrainment 8
C109/C109M Test Method for Compressive Strength of
Apparent Loose Density of Hydrated Lime, Pulverized
Quicklime, and Limestone 20
Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube
Apparent Packed Density of Hydrated Lime, Pulverized
Specimens)
Quicklime, and Limestone 21
C136 Test Method for Sieve Analysis of Fine and Coarse
Autoclave Expansion of Hydrated Lime 9
Dry Brightness of Pulverized Limestone 12
Aggregates
Dry Screening by Air Jet Sieve 18
C150 Specification for Portland Cement
Fineness of Pulverized Quicklime and Hydrated Lime by Air
C185 Test Method for Air Content of Hydraulic Cement
Permeability 16
Limestone Grindability 13
Mortar
Particle Size of Pulverized Limestone 17
C188 Test Method for Density of Hydraulic Cement
Plasticity of Lime Putty 6
C192/C192M Practice for Making and Curing Concrete
Popping and Pitting of Hydrated Lime 10
Residue and Sieve Analysis 15
Test Specimens in the Laboratory
Settling Rate of Hydrated Lime 14
C204 Test Methods for Fineness of Hydraulic Cement by
Slaking Rate of Quicklime 11
Specific Gravity of Hydrated Lime Products 22 Air-Permeability Apparatus
Standard Consistency of Lime Putty 5
C207 Specification for Hydrated Lime for Masonry Pur-
Water Retention of Hydrated Lime 7
poses
Wet Sieve Analysis of Agricultural Liming Materials 19
C230/C230M Specification for Flow Table for Use in Tests
1.3 The values stated in SI units are to be regarded as
of Hydraulic Cement
standard. The values given in parentheses are mathematical
C231 Test Method for Air Content of Freshly Mixed Con-
conversions to inch-pound units that are provided for informa-
crete by the Pressure Method
tion only and are not considered standard.
C305 Practice for Mechanical Mixing of Hydraulic Cement
1.4 This standard does not purport to address all of the
Pastes and Mortars of Plastic Consistency
safety concerns, if any, associated with its use. It is the
C430 Test Method for Fineness of Hydraulic Cement by the
responsibility of the user of this standard to establish appro-
45-µm (No. 325) Sieve
C472 Test Methods for Physical Testing of Gypsum, Gyp-
sum Plasters and Gypsum Concrete
1
These test methods are under the jurisdiction of ASTM Committee C07 on
C595 Specification for Blended Hydraulic Cements
Lime and are the direct responsibility of Subcommittee C07.06 on Physical Tests.
Current edition approved June 15, 2009. Published July 2009. Originally
approved in 1934. Last previous edition approved in 2008 as C110–09. DOI:
3
10.1520/C0110-09A.
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
2
For tests on limestone as aggregate, seeVol 04.02 of the Annual Book of ASTM
contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
Standards. For tests on limestone as building stone, see Vol 04.05 of the Annual
Standards volume information, refer to the standard’s Document Summary page on
Book of ASTM Standards.
the ASTM website.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
C110 – 09a
C670 Practice for Preparing Precision and Bias Statements
for Test Methods for Construction Materials
C702 Practice for Reducing Samples of Aggregate to Test-
ing Size
C778 Specification for Standard Sand
C1005 Specification for Reference Masses and Devices for
Deter
...

This document is not anASTM standard and is intended only to provide the user of anASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:C110–09 Designation: C 110 – 09a
Standard Test Methods for
Physical Testing of Quicklime, Hydrated Lime, and
1
Limestone
This standard is issued under the fixed designation C 110; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope*
1.1 These test methods cover physical testing of quicklime and hydrated lime, and of limestone not otherwise covered inASTM
2
standards.
NOTE 1—Quicklime and hydrated lime have a high affinity for moisture and carbon dioxide. Caution should be taken to protect both hydrated and
quicklime during sampling, storage, and testing (see Practice C 50).
1.2 The test procedures appear in the following order:
Section
Air Entrainment 8
Apparent Loose Density of Hydrated Lime, Pulverized
Quicklime, and Limestone 20
Apparent Packed Density of Hydrated Lime, Pulverized
Quicklime, and Limestone 21
Autoclave Expansion of Hydrated Lime 9
Dry Brightness of Pulverized Limestone 12
Dry Screening by Air Jet Sieve 18
Fineness of Pulverized Quicklime and Hydrated Lime by Air
Permeability 16
Limestone Grindability 13
Particle Size of Pulverized Limestone 17
Plasticity of Lime Putty 6
Popping and Pitting of Hydrated Lime 10
Residue and Sieve Analysis 15
Settling Rate of Hydrated Lime 14
Slaking Rate of Quicklime 11
Specific Gravity of Hydrated Lime Products 22
Standard Consistency of Lime Putty 5
Water Retention of Hydrated Lime 7
Wet Sieve Analysis of Agricultural Liming Materials 19
1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions
to inch-pound units that are provided for information only and are not considered standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory
limitations prior to use.
2. Referenced Documents
3
2.1 ASTM Standards:
C 28/C 28M Specification for Gypsum Plasters
C50 Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C51 Terminology Relating to Lime and Limestone (as used by the Industry)
C91 Specification for Masonry Cement
1
These test methods are under the jurisdiction of ASTM Committee C07 on Lime and are the direct responsibility of Subcommittee C07.06 on Physical Tests.
Current edition approved March 1,June 15, 2009. Published MarchJuly 2009. Originally approved in 1934. Last previous edition approved in 2008 as C110–08a.C 110–09.
2
For tests on limestone as aggregate, see Vol 04.02 of the Annual Book of ASTM Standards. For tests on limestone as building stone, see Vol 04.05 of the Annual Book
of ASTM Standards.
3
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at [e-mail]. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
*A Summary of Changes section appears at the end of this standard.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
C110–09a
C 109/C 109M TestMethodforCompressiveStrengthofHydraulicCementMortars(Using2-in.or[50-mm]CubeSpecimens)
C 136 Test Method for Sieve Analysis of Fine and Coarse Aggregates
C 150 Specification for Portland Cement
C 185 Test Method for Air Content of Hydraulic Cement Mortar
C 188 Test Method for Density of Hydraulic Cement
C 192/C 192M Practice for Making and Curing Concrete Test Specimens in the Laboratory
C 204 Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C 207 Specification for Hydrated Lime for Masonry Purposes
C 230/C 230M Specification for Flow Table for Use in Tests of Hydraulic Cement
C 231 Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C 305 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C 430 Test Method for Fineness of Hydraulic Cement by the 45-m (No. 325) Sieve
C 472 Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
C 595 Specification
...