ASTM F2376-21
(Practice)Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
SCOPE
1.1 This practice applies to the classification, design, manufacture, construction, major modification, and operation of water slide systems. Water slide systems shall be defined as rides intended for use by riders in bathing attire where the action of the ride involves possible and purposeful immersion of the rider's body either in whole or in part in water, and uses circulating water to mobilize or lubricate the rider’s transportation along a purpose built path. This includes slides used with or without vehicles as defined below. The terms water slides, waterslides, and slides shall be considered equivalent when used in this practice.
1.1.1 Owner/operator requirements of this standard are required of all water slide systems regardless of date of construction.
1.1.2 The design, manufacture and construction of an existing water slide or portions of a water slide system unaffected by a major modification shall meet the standard requirements in existence at the time of the construction.
1.2 For the purposes of this practice, a water slide system includes:
1.2.1 The flume,
1.2.2 The water-circulation system,
1.2.3 The starting platform with associated means of access and egress,
1.2.4 The structural supports,
1.2.5 Vehicles or other aquatic accessories that are part of the water slide as defined by the manufacturer, and
1.2.6 Means of slide termination.
1.3 This practice shall not apply to:
1.3.1 Any water slides installed in private residences,
1.3.2 Water flume amusement rides where contact with water is merely incidental (for example, log flume rides, shoot-the-chutes),
1.3.3 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard,
1.3.4 Lazy river type attractions operating at constant elevation, constructed in the ground,
1.3.5 Inflatable water slides (constant air supply) that are mounted on land (refer to Practice F2374-19 for the requirements of these types of water slides), and
1.3.6 Inflatable water slides (captured air) that are floating on a body of water (refer to EN/ISO 25649, parts 1 through -7).
1.4 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant, as defined in Terminology F747-15, and the manufacturer provides:
1.4.1 A historical summary of the water slide, or major modification as defined in Terminology F747-15, and
1.4.2 A statement that the design is service proven or previously compliant. Water slides and major modifications to water slides may qualify as previously compliant for five years following the date of publication of this practice. Thereafter, water slides and major modifications to water slides must qualify as service proven or meet the requirements of this practice.
1.4.3 Service proven or previously compliant designs shall comply with Section 4.
1.5 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.
Note 1: The conversion factor from inch-pound to metric units is 1 in. = 25.4 mm, and 1 lb = 4.4482 N.
1.6 This practice includes an Appendix, which provides additional information to enhance the user's understanding of and application of the criteria presented in this practice, for example, rationale, background, drawings, interpretation, or commentary. The information in the Appendix shall not be considered a mandatory part of this practice.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on P...
General Information
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F2376 −21
Standard Practice for
Classification, Design, Manufacture, Construction, and
1
Operation of Water Slide Systems
This standard is issued under the fixed designation F2376; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 1.3.3 Amusement rides and devices whose design criteria
are specifically addressed in another ASTM standard,
1.1 This practice applies to the classification, design,
1.3.4 Lazy river type attractions operating at constant
manufacture, construction, major modification, and operation
elevation, constructed in the ground,
of water slide systems. Water slide systems shall be defined as
rides intended for use by riders in bathing attire where the 1.3.5 Inflatable water slides (constant air supply) that are
action of the ride involves possible and purposeful immersion mounted on land (refer to Practice F2374-19 for the require-
of the rider’s body either in whole or in part in water, and uses ments of these types of water slides), and
circulating water to mobilize or lubricate the rider’s transpor-
1.3.6 Inflatable water slides (captured air) that are floating
tationalongapurposebuiltpath.Thisincludesslidesusedwith
onabodyofwater(refertoEN/ISO25649,parts1through-7).
or without vehicles as defined below. The terms water slides,
1.4 Pre-existing designs manufactured after the effective
waterslides, and slides shall be considered equivalent when
date of publication of this practice if the design is service
used in this practice.
proven or previously compliant, as defined in Terminology
1.1.1 Owner/operator requirements of this standard are
F747-15, and the manufacturer provides:
required of all water slide systems regardless of date of
1.4.1 A historical summary of the water slide, or major
construction.
modification as defined in Terminology F747-15, and
1.1.2 The design, manufacture and construction of an exist-
ing water slide or portions of a water slide system unaffected 1.4.2 A statement that the design is service proven or
previously compliant. Water slides and major modifications to
by a major modification shall meet the standard requirements
in existence at the time of the construction. water slides may qualify as previously compliant for five years
following the date of publication of this practice. Thereafter,
1.2 For the purposes of this practice, a water slide system
water slides and major modifications to water slides must
includes:
qualify as service proven or meet the requirements of this
1.2.1 The flume,
practice.
1.2.2 The water-circulation system,
1.4.3 Service proven or previously compliant designs shall
1.2.3 The starting platform with associated means of access
comply with Section 4.
and egress,
1.2.4 The structural supports,
1.5 The values stated in inch-pound units are to be regarded
1.2.5 Vehicles or other aquatic accessories that are part of
as standard. No other units of measurement are included in this
the water slide as defined by the manufacturer, and
standard.
1.2.6 Means of slide termination.
NOTE 1—The conversion factor from inch-pound to metric units is 1
in. = 25.4 mm, and 1 lb = 4.4482 N.
1.3 This practice shall not apply to:
1.6 This practice includes an Appendix, which provides
1.3.1 Any water slides installed in private residences,
additional information to enhance the user’s understanding of
1.3.2 Water flume amusement rides where contact with
and application of the criteria presented in this practice, for
water is merely incidental (for example, log flume rides,
example, rationale, background, drawings, interpretation, or
shoot-the-chutes),
commentary. The information in the Appendix shall not be
considered a mandatory part of this practice.
1
1.7 This standard does not purport to address all of the
This practice is under the jurisdiction ofASTM Committee F24 on Amusement
RidesandDevicesandisthedirectresponsibilityofSubcommitteeF24.70onWater
safety concerns, if any, associated with its use. It is the
Related Amusement Rides and Devices.
responsibility of the user of this standard to establish appro-
Current edition approved May 1, 2021. Published June 2021. Originally
priate safety, health, and environmental practices and deter-
approved in 2006. Last previous edition approved in 2017 as F2376 – 17a. DOI:
10.1520/F2376-21. mine the applicability of regulatory limitations prior to use.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F2376−21
1.8 This international standard was developed in accor- 3.1.5 lifeguard—indi
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F2376 − 17a F2376 − 21
Standard Practice for
Classification, Design, Manufacture, Construction, and
1
Operation of Water Slide Systems
This standard is issued under the fixed designation F2376; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice applies to the classification, design, manufacture, construction, major modification, and operation of water slide
systems. Water slide systems shall be defined as rides intended for use by riders in bathing attire where the action of the ride
involves possible and purposeful immersion of the rider’s body either in whole or in part in water, and uses circulating water to
mobilize or lubricate the rider’s transportation along a purpose built path. This includes slides used with or without vehicles as
defined below. The terms water slides, waterslides, and slides shall be considered equivalent when used in this practice.
1.1.1 Owner/operator requirements of this standard are required of all water slide systems regardless of date of construction.
1.1.2 The design, manufacture and construction of an existing water slide or portions of a water slide system unaffected by a major
modification shall meet the standard requirements in existence at the time of the construction.
1.2 For the purposes of this practice, a water slide system includes:
1.2.1 The flume,
1.2.2 The water-circulation system,
1.2.3 The starting platform with associated means of access and egress,
1.2.4 The structural supports,
1.2.5 Vehicles or other aquatic accessories that are part of the water slide as defined by the manufacturer, and
1.2.6 Means of slide termination.
1.3 This practice shall not apply to:
1.3.1 Any water slides installed in private residences,
1.3.2 Water flume amusement rides where contact with water is merely incidental (for example, log flume rides, shoot-the-chutes),
1
This practice is under the jurisdiction of ASTM Committee F24 on Amusement Rides and Devices and is the direct responsibility of Subcommittee F24.70 on Water
Related Amusement Rides and Devices.
Current edition approved Dec. 1, 2017May 1, 2021. Published January 2018June 2021. Originally approved in 2006. Last previous edition approved in 2017 as
F2376 – 17.F2376 – 17a. DOI: 10.1520/F2376-17A.10.1520/F2376-21.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F2376 − 21
1.3.3 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard,
1.3.4 Lazy river type attractions operating at constant elevation, constructed in the ground, and
1.3.5 Inflatable water slides (constant air supply) that are mounted on land (refer to Practice F2374-19 for the requirements of
these types of water slides), and
1.3.6 Inflatable water slides (captured air) that are floating on a body of water (refer to EN/ISO 25649, parts 1 through -7).
1.4 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or
previously compliant, as defined in Section 3.1.26 of Practice Terminology F2291F747,-15, and the manufacturer provides:
1.4.1 A historical summary of the water slide, or major modification as defined in Terminology F747,-15, and
1.4.2 A statement that the design is service proven or previously compliant. Water slides and major modifications to water slides
may qualify as previously compliant for five years following the date of publication of this practice. Thereafter, water slides and
major modifications to water slides must qualify as service proven or meet the requirements of this practice.
1.4.3 Service proven or previously compliant designs shall comply with Section 84.
1.5 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this
standard.
NOTE 1—The conversion factor from inch-pound to metric units is 1 in. = 25.4 mm, and 1 lb = 4.4482 N.
1.6 This practice includes an Appendix, which provides additional information to enhance the user’s understanding of and
application of the criteria presented in this practice, for example, rationale, background, drawings, interpretation, or commentary.
The information in the Appendix shall not be considered a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.