ASTM C90-16a

Standard Specification for Loadbearing Concrete Masonry Units

ABSTRACT
This specification covers hollow and solid concrete masonry units made from hydraulic cement, water, and mineral aggregates with or without the inclusion of other materials. There are three classes of concrete masonry units: normal weight, medium weight, and lightweight. These units are suitable for both loadbearing and nonloadbearing applications. Concrete masonry units shall be made from lightweight or normal weight aggregates, or both.
SCOPE
1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from hydraulic cement, water, and mineral aggregates with or without the inclusion of other materials. There are three classes of concrete masonry units: Normal Weight, Medium Weight, and Lightweight. These units are suitable for both loadbearing and nonloadbearing applications.  
1.2 Concrete masonry units covered by this specification are made from lightweight or normal weight aggregates, or both.
Note 1: The requirements of this specification have been researched, evaluated, and established for over a century, resulting in the physical properties and attributes defined here. These requirements are uniquely and solely applicable to concrete masonry units manufactured on equipment using low or zero slump concrete and the constituent materials defined herein. Many performance attributes of concrete masonry units are indirectly accounted for, or inherently reflected within, the requirements of this specification without direct measurement, assessment, or evaluation. Applying the requirements of this specification to products that may be similar in appearance, use, or nature to those covered by this specification may not address all pertinent physical properties necessary to ensure performance or serviceability of the resulting construction in real-world applications under typical exposure environments. Products manufactured using alternative materials, manufacturing methods, or curing processes not covered by this specification should not be evaluated solely using the requirements in this specification; however, developers of new products can consider the property requirements of this specification as a beginning benchmark for unit performance. It is reasonable to test new products for system performance as well as unit performance.  
1.3 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Note 2: When particular features are desired such as surface textures for appearance or bond, finish, color, or particular properties such as density classification, higher compressive strength, fire resistance, thermal performance or acoustical performance, these features should be specified separately by the purchaser. Suppliers should be consulted as to the availability of units having the desired features.

General Information

• Status: Historical
• Publication Date: 14-Dec-2016
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: C15 - Manufactured Masonry Units
• Drafting Committee: C15.03 - Concrete Masonry Units and Related Units

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:C90 −16a
Standard Specification for
1
Loadbearing Concrete Masonry Units
This standard is issued under the fixed designation C90; the number immediately following the designation indicates the year of original
adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.Asuperscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
for appearance or bond, finish, color, or particular properties such as
1. Scope*
density classification, higher compressive strength, fire resistance, thermal
1.1 This specification covers hollow and solid (see 5.3 and
performance or acoustical performance, these features should be specified
5.4) concrete masonry units made from hydraulic cement, separately by the purchaser. Suppliers should be consulted as to the
availability of units having the desired features.
water, and mineral aggregates with or without the inclusion of
other materials. There are three classes of concrete masonry
2. Referenced Documents
units: Normal Weight, Medium Weight, and Lightweight.
2
These units are suitable for both loadbearing and nonloadbear- 2.1 ASTM Standards:
ing applications.
C33/C33M Specification for Concrete Aggregates
C140/C140M Test Methods for Sampling and Testing Con-
1.2 Concretemasonryunitscoveredbythisspecificationare
crete Masonry Units and Related Units
made from lightweight or normal weight aggregates, or both.
C150/C150M Specification for Portland Cement
NOTE 1—The requirements of this specification have been researched,
evaluated, and established for over a century, resulting in the physical C331/C331M Specification for Lightweight Aggregates for
properties and attributes defined here. These requirements are uniquely
Concrete Masonry Units
and solely applicable to concrete masonry units manufactured on equip-
C426 Test Method for Linear Drying Shrinkage of Concrete
ment using low or zero slump concrete and the constituent materials
Masonry Units
definedherein.Manyperformanceattributesofconcretemasonryunitsare
C595/C595M Specification for Blended Hydraulic Cements
indirectly accounted for, or inherently reflected within, the requirements
of this specification without direct measurement, assessment, or evalua- C618 Specification for Coal Fly Ash and Raw or Calcined
tion.Applying the requirements of this specification to products that may
Natural Pozzolan for Use in Concrete
be similar in appearance, use, or nature to those covered by this
C979/C979M Specification for Pigments for Integrally Col-
specificationmaynotaddressallpertinentphysicalpropertiesnecessaryto
ored Concrete
ensure performance or serviceability of the resulting construction in
C989/C989M Specification for Slag Cement for Use in
real-world applications under typical exposure environments. Products
manufactured using alternative materials, manufacturing methods, or Concrete and Mortars
curing processes not covered by this specification should not be evaluated
C1157/C1157M Performance Specification for Hydraulic
solely using the requirements in this specification; however, developers of
Cement
new products can consider the property requirements of this specification
C1232 Terminology of Masonry
as a beginning benchmark for unit performance. It is reasonable to test
C1240 Specification for Silica Fume Used in Cementitious
new products for system performance as well as unit performance.
Mixtures
1.3 The text of this specification references notes and
C1314 Test Method for Compressive Strength of Masonry
footnotes which provide explanatory material. These notes and
Prisms
footnotes (excluding those in tables and figures) shall not be
E519/E519M Test Method for Diagonal Tension (Shear) in
considered as requirements of the standard.
Masonry Assemblages
1.4 The values stated in inch-pound units are to be regarded
E72 Test Methods of Conducting Strength Tests of Panels
as standard. The values given in parentheses are mathematical
for Building Construction
conversions to SI units that are provided for information only
and are not considered standard.
3. Terminology
NOTE 2—When particular features are desired such as surface textures
3.1 Terminology defined in Terminology C1232 shall apply
for this specification.
1
This specification is under the jurisdiction of ASTM Committee C15 on
Manufactured Masonry Units and is the direct responsibility of Subcommittee
2
C15.03 on Concrete Masonry Units and Related Units. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved Dec. 15, 2016. Published January 2017. Originally contact ASTM Customer Service at [e-mail]. For Annual Book of ASTM
approved in 1931. Last previous edition approved in 2016 as C90 – 15. DOI: S
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: C90 − 16 C90 − 16a
Standard Specification for
1
Loadbearing Concrete Masonry Units
This standard is issued under the fixed designation C90; the number immediately following the designation indicates the year of original
adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript
epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope*
1.1 This specification covers hollow and solid (see 5.3 and 5.4) concrete masonry units made from hydraulic cement, water, and
mineral aggregates with or without the inclusion of other materials. There are three classes of concrete masonry units: Normal
Weight, Medium Weight, and Lightweight. These units are suitable for both loadbearing and nonloadbearing applications.
1.2 Concrete masonry units covered by this specification are made from lightweight or normal weight aggregates, or both.
NOTE 1—The requirements of this specification have been researched, evaluated, and established for over a century, resulting in the physical properties
and attributes defined here. These requirements are uniquely and solely applicable to concrete masonry units manufactured on equipment using low or
zero slump concrete and the constituent materials defined herein. Many performance attributes of concrete masonry units are indirectly accounted for,
or inherently reflected within, the requirements of this specification without direct measurement, assessment, or evaluation. Applying the requirements
of this specification to products that may be similar in appearance, use, or nature to those covered by this specification may not address all pertinent
physical properties necessary to ensure performance or serviceability of the resulting construction in real-world applications under typical exposure
environments. Products manufactured using alternative materials, manufacturing methods, or curing processes not covered by this specification should
not be evaluated solely using the requirements in this specification; however, developers of new products can consider the property requirements of this
specification as a beginning benchmark for unit performance. It is reasonable to test new products for system performance as well as unit performance.
1.3 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes
(excluding those in tables and figures) shall not be considered as requirements of the standard.
1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and are not considered standard.
NOTE 2—When particular features are desired such as surface textures for appearance or bond, finish, color, or particular properties such as density
classification, higher compressive strength, fire resistance, thermal performance or acoustical performance, these features should be specified separately
by the purchaser. Suppliers should be consulted as to the availability of units having the desired features.
2. Referenced Documents
2
2.1 ASTM Standards:
C33/C33M Specification for Concrete Aggregates
C140/C140M Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
C150/C150M Specification for Portland Cement
C331/C331M Specification for Lightweight Aggregates for Concrete Masonry Units
C426 Test Method for Linear Drying Shrinkage of Concrete Masonry Units
C595/C595M Specification for Blended Hydraulic Cements
C618 Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C979/C979M Specification for Pigments for Integrally Colored Concrete
C989/C989M Specification for Slag Cement for Use in Concrete and Mortars
C1157/C1157M Performance Specification for Hydraulic Cement
C1232 Terminology of Masonry
C1240 Specification for Silica Fume Used in Cementitious Mixtures
C1314 Test Method for Compressive Strength of Masonry Prisms
1
This specification is under the jurisdiction of ASTM Committee C15 on Manufactured Masonry Units and is the direct responsibility of Subcommittee C15.03 on
Concrete Masonry Units and Related Units.
Current edition approved July 15, 2016Dec. 15, 2016. Published July 2016January 2017. Originally approved in 1931. Last previous edition approved in 20152016 as
C90 – 15. DOI: 10.1520/C0090-16.10.1520/C0090-16A.
2
For referenced ASTM standar
...