ASTM F2291-18
(Practice)Standard Practice for Design of Amusement Rides and Devices
Standard Practice for Design of Amusement Rides and Devices
SIGNIFICANCE AND USE
4.1 The purpose of this practice is to provide designers, engineers, manufacturers, owners, and operators with criteria and references for use in designing amusement rides and devices or a major modification for amusement rides or devices.
SCOPE
1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides and devices manufactured after the effective date of publication except as noted in 1.2.
1.2 This practice shall not apply to:
1.2.1 Patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats),
1.2.2 Artificial climbing walls,
1.2.3 Air-supported structures,
1.2.4 dry slides,
1.2.5 coin operated rides,
1.2.6 Amusement rides or devices that involve the purposeful immersion of the patron's body partially or totally in the water and involves more than incidental patron water contact (for example, pools, water slides, lazy rivers, interactive aquatic play devices),
1.2.7 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard,
1.2.8 Portions of an amusement ride or device unaffected by a major modification,
1.2.9 Upgrades to electrical wiring, electrical motors and electrical components of amusement rides and devices provided the original design and safety criteria are maintained or enhanced, and
1.2.10 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven or previously compliant and the manufacturer provides:
1.2.10.1 A historical summary of the amusement ride, device or major modification, and
1.2.10.2 A statement that the design is service proven or previously compliant as specified by Section 3.
1.2.10.3 Amusement rides and devices, and major modifications to amusement rides and devices may qualify as “previously compliant” for five years following the date of publication of this practice. Thereafter, amusement rides and devices, and major modifications to amusement rides and devices must qualify as “service proven” or meet the requirements of this practice.
1.3 This practice includes an annex (mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth) to improve the user's understanding and application of the criteria presented in this practice. The annex information shall be interpreted as mandatory design criteria.
1.4 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale, background, interpretations, drawings, commentary, and so forth.) to improve the user's understanding and application of the criteria presented in this practice. The appendix information shall not be interpreted as mandatory design criteria.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F2291 − 18
Standard Practice for
1
Design of Amusement Rides and Devices
This standard is issued under the fixed designation F2291; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope devices must qualify as “service proven” or meet the require-
ments of this practice.
1.1 This practice establishes criteria for the design of
amusement rides, devices and major modifications to amuse- 1.3 This practice includes an annex (mandatory), which
ment rides and devices manufactured after the effective date of provides additional information (for example, rationale,
publication except as noted in 1.2. background, interpretations, drawings, commentary, and so
forth) to improve the user’s understanding and application of
1.2 This practice shall not apply to:
the criteria presented in this practice. The annex information
1.2.1 Patron directed amusement rides or devices (for
shall be interpreted as mandatory design criteria.
example, go karts, bumper cars, bumper boats),
1.2.2 Artificial climbing walls, 1.4 This practice includes an appendix (non-mandatory),
1.2.3 Air-supported structures, which provides additional information (for example, rationale,
1.2.4 dry slides, background, interpretations, drawings, commentary, and so
1.2.5 coin operated rides, forth.) to improve the user’s understanding and application of
1.2.6 Amusement rides or devices that involve the purpose- the criteria presented in this practice. The appendix informa-
ful immersion of the patron’s body partially or totally in the tion shall not be interpreted as mandatory design criteria.
water and involves more than incidental patron water contact
1.5 This standard does not purport to address all of the
(for example, pools, water slides, lazy rivers, interactive
safety concerns, if any, associated with its use. It is the
aquatic play devices),
responsibility of the user of this standard to establish appro-
1.2.7 Amusement rides and devices whose design criteria
priate safety, health, and environmental practices and deter-
are specifically addressed in another ASTM standard,
mine the applicability of regulatory limitations prior to use.
1.2.8 Portionsofanamusementrideordeviceunaffectedby
1.6 This international standard was developed in accor-
a major modification,
dance with internationally recognized principles on standard-
1.2.9 Upgrades to electrical wiring, electrical motors and
ization established in the Decision on Principles for the
electrical components of amusement rides and devices pro-
Development of International Standards, Guides and Recom-
vided the original design and safety criteria are maintained or
mendations issued by the World Trade Organization Technical
enhanced, and
Barriers to Trade (TBT) Committee.
1.2.10 Pre-existing designs manufactured after the effective
date of publication of this practice if the design is service
2. Referenced Documents
provenorpreviouslycompliantandthemanufacturerprovides:
2
2.1 ASTM Standards:
1.2.10.1 A historical summary of the amusement ride,
F770Practice for Ownership, Operation, Maintenance, and
device or major modification, and
Inspection of Amusement Rides and Devices
1.2.10.2 A statement that the design is service proven or
F1159PracticeforDesignofAmusementRidesandDevices
previously compliant as specified by Section 3.
that are Outside the Purview of Other F24 Design Stan-
1.2.10.3 Amusement rides and devices, and major modifi-
dards
cations to amusement rides and devices may qualify as
F1193Practice for Quality, Manufacture, and Construction
“previously compliant” for five years following the date of
of Amusement Rides and Devices
publication of this practice. Thereafter, amusement rides and
F2137Practice for Measuring the Dynamic Characteristics
devices, and major modifications to amusement rides and
of Amusement Rides and Devices
F2374Practice for Design, Manufacture, Operation, and
1
ThispracticeisunderthejurisdictionofASTMCommitteeF24onAmusement
Rides and Devices and is the direct responsibility of Subcommittee F24.24 on
2
Design and Manufacture. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved Aug. 1, 2018. Published September 2018. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 2003. Last previous edition approved in 2017 as F2291–17. DOI: Standards volume information, refer to the standard’s Document Summary page on
10.1520/F2291-18. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: F2291 − 17 F2291 − 18
Standard Practice for
1
Design of Amusement Rides and Devices
This standard is issued under the fixed designation F2291; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This practice establishes criteria for the design of amusement rides, devices and major modifications to amusement rides
and devices manufactured after the effective date of publication except as noted in 1.2.
1.2 This practice shall not apply to:
1.2.1 Patron directed amusement rides or devices (for example, go karts, bumper cars, bumper boats),
1.2.2 Artificial climbing walls,
1.2.3 Air-supported structures,
1.2.4 dry slides,
1.2.5 coin operated rides,
1.2.6 Amusement rides or devices that involve the purposeful immersion of the patron’s body partially or totally in the water
and involves more than incidental patron water contact (for example, pools, water slides, lazy rivers, interactive aquatic play
devices),
1.2.7 Amusement rides and devices whose design criteria are specifically addressed in another ASTM standard,
1.2.8 Portions of an amusement ride or device unaffected by a major modification,
1.2.9 Upgrades to electrical wiring, electrical motors and electrical components of amusement rides and devices provided the
original design and safety criteria are maintained or enhanced, and
1.2.10 Pre-existing designs manufactured after the effective date of publication of this practice if the design is service proven
or previously compliant and the manufacturer provides:
1.2.10.1 A historical summary of the amusement ride, device or major modification, and
1.2.10.2 A statement that the design is service proven or previously compliant as specified by Section 3.
1.2.10.3 Amusement rides and devices, and major modifications to amusement rides and devices may qualify as “previously
compliant” for five years following the date of publication of this practice. Thereafter, amusement rides and devices, and major
modifications to amusement rides and devices must qualify as “service proven” or meet the requirements of this practice.
1.3 This practice includes an annex (mandatory), which provides additional information (for example, rationale, background,
interpretations, drawings, commentary, and so forth) to improve the user’s understanding and application of the criteria presented
in this practice. The annex information shall be interpreted as mandatory design criteria.
1.4 This practice includes an appendix (non-mandatory), which provides additional information (for example, rationale,
background, interpretations, drawings, commentary, and so forth.) to improve the user’s understanding and application of the
criteria presented in this practice. The appendix information shall not be interpreted as mandatory design criteria.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility
of the user of this standard to establish appropriate safety safety, health, and healthenvironmental practices and determine the
applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization
established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued
by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
1
This practice is under the jurisdiction of ASTM Committee F24 on Amusement Rides and Devices and is the direct responsibility of Subcommittee F24.24 on Design
and Manufacture.
Current edition approved June 1, 2017Aug. 1, 2018. Published August 2017September 2018. Originally approved in 2003. Last previous edition approved in 20162017
as F2291 – 16.F2291 – 17. DOI: 10.1520/F2291-17.10.1520/F2291-18.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F2291 − 18
2. Referenced Documents
2
2.1 ASTM Standards:
F770 Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
F1159 Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards
F1193 Practice for Quality, Manufacture, and
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.