ASTM B265-11e1

Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

ABSTRACT
This specification covers annealed titanium and titanium alloy strip, sheet, and plate. The grades of titanium and titanium alloy metal covered by this specification shall have the chemical composition requirements of: nitrogen, carbon, hydrogen, iron, oxygen, aluminum, vanadium, tin, ruthenium, palladium, cobalt, molybdenum, chromium, nickel, niobium, zirconium, silicon, and titanium. For sheet and strip, the bend test specimen shall stand being bent cold through without fracture in the outside of the bent portion. Product analysis tolerances cover variations between laboratories in the measurement of chemical content of the specimen. In cutting samples for analysis, the operation should be carried out insofar as possible in a dust-free atmosphere because utmost care must be used in sampling titanium for chemical analysis due to its great affinity for elements such as oxygen, nitrogen, and hydrogen. The chemical analysis shall be conducted by the standard techniques normally utilized by the manufacturer and purchaser.
SCOPE
1.1 This specification2 covers annealed titanium and titanium alloy strip, sheet, and plate as follows:  
1.1.1 Grade 1—Unalloyed titanium,  
1.1.2 Grade 2—Unalloyed titanium,
1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS),  
1.1.3 Grade 3—Unalloyed titanium,  
1.1.4 Grade 4—Unalloyed titanium,  
1.1.5 Grade 5—Titanium alloy (6 % aluminum, 4 % vanadium),  
1.1.6 Grade 6—Titanium alloy (5 % aluminum, 2.5 % tin),  
1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.7.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS),  
1.1.8 Grade 9—Titanium alloy (3.0 % aluminum, 2.5 % vanadium),  
1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.25 % palladium,  
1.1.10 Grade 12—Titanium alloy (0.3 % molybdenum, 0.8 % nickel),  
1.1.11 Grade 13—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),  
1.1.12 Grade 14—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),  
1.1.13 Grade 15—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),  
1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.14.1 Grade 16H—Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi minimum UTS),  
1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.08 % palladium,  
1.1.16 Grade 18—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,  
1.1.17 Grade 19—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),  
1.1.18 Grade 20—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 % to 0.08 % palladium,  
1.1.19 Grade 21—Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),  
1.1.20 Grade 23—Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI),  
1.1.21 Grade 24—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,  
1.1.22 Grade 25—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium,  
1.1.23 Grade 26—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.23.1 Grade 26H—Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),  
1.1.24 Grade 27—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,  
1.1.25 Grade 28—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,  
1.1.26 Grade 29—Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI) plus 0.08 to 0.14 % ruthenium,  
1.1.27 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 % palladium),  
1.1.28 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 % palladium),  
1.1.29 Grade 32—Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum),  
1.1.30 Grade 33—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.02 5 % ruthenium, 0.15 % chromium),  
1.1.31 Grade 34—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ...

General Information

• Status: Historical
• Publication Date: 31-Aug-2011
• ICS: 77.150.50 - Titanium products
• Technical Committee: B10 - Reactive and Refractory Metals and Alloys
• Drafting Committee: B10.01 - Titanium

Relations

• Replaces: ASTM B265-11 - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• Effective Date: 01-Sep-2011
• Replaced By: ASTM B265-13 - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• Effective Date: 01-Jun-2013
• Referred By: ASTM B363-19 - Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings
• Effective Date: 01-Sep-2011
• Referred By: ASTM F1155-10(2019) - Standard Practice for Selection and Application of Piping System Materials
• Effective Date: 01-Sep-2011
• Referred By: ASTM B898-20 - Standard Specification for Reactive and Refractory Metal Clad Plate
• Effective Date: 01-Sep-2011
• Referred By: ASTM D1002-10(2019) - Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
• Effective Date: 01-Sep-2011
• Referred By: ASTM D3165-07(2023) - Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
• Effective Date: 01-Sep-2011
• Referred By: ASTM D3658-01(2016) - Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
• Effective Date: 01-Sep-2011
• Referred By: ASTM F67-13(2017) - Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
• Effective Date: 01-Sep-2011
• Referred By: ASTM D3528-96(2016) - Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
• Effective Date: 01-Sep-2011
• Referred By: ASTM D3433-99(2020) - Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
• Effective Date: 01-Sep-2011
• Referred By: ASTM D2557-98(2017) - Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F)
• Effective Date: 01-Sep-2011

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
´1
Designation:B265 −11
StandardSpecification for
1
Titanium and Titanium Alloy Strip, Sheet, and Plate
This standard is issued under the fixed designation B265; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1
ε NOTE—Editorial changes were made to Tables 7, 9 and 12 in November 2012.
1. Scope* 1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.08 %
2 palladium,
1.1 This specification covers annealed titanium and tita-
1.1.16 Grade 18—Titanium alloy (3 % aluminum, 2.5 %
nium alloy strip, sheet, and plate as follows:
vanadium) plus 0.04 to 0.08 % palladium,
1.1.1 Grade 1—Unalloyed titanium,
1.1.17 Grade 19—Titanium alloy (3 % aluminum, 8 %
1.1.2 Grade 2—Unalloyed titanium,
vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1.2.1 Grade 2H—Unalloyedtitanium(Grade2with58ksi
1.1.18 Grade 20—Titanium alloy (3 % aluminum, 8 %
minimum UTS),
vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum)
1.1.3 Grade 3—Unalloyed titanium,
plus 0.04 % to 0.08 % palladium,
1.1.4 Grade 4—Unalloyed titanium,
1.1.19 Grade 21—Titanium alloy (15 % molybdenum, 3 %
1.1.5 Grade 5—Titanium alloy (6 % aluminum, 4 %
aluminum, 2.7 % niobium, 0.25 % silicon),
vanadium),
1.1.20 Grade 23—Titanium alloy (6 % aluminum, 4 % va-
1.1.6 Grade 6—Titanium alloy (5 % aluminum, 2.5 % tin),
nadium with extra low interstitial elements, ELI),
1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.25 %
1.1.21 Grade 24—Titanium alloy (6 % aluminum, 4 % va-
palladium,
nadium) plus 0.04 % to 0.08 % palladium,
1.1.7.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.25 %
1.1.22 Grade 25—Titanium alloy (6 % aluminum, 4 % va-
palladium (Grade 7 with 58 ksi minimum UTS),
nadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 %
1.1.8 Grade 9—Titanium alloy (3.0 % aluminum, 2.5 %
palladium,
vanadium),
1.1.23 Grade 26—Unalloyed titanium plus 0.08 to 0.14 %
1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.25 %
ruthenium,
palladium,
1.1.23.1 Grade 26H—Unalloyed titanium plus 0.08 to
1.1.10 Grade 12—Titanium alloy (0.3 % molybdenum,
0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),
0.8 % nickel),
1.1.24 Grade 27—Unalloyed titanium plus 0.08 to 0.14 %
1.1.11 Grade 13—Titanium alloy (0.5 % nickel, 0.05 %
ruthenium,
ruthenium),
1.1.25 Grade 28—Titanium alloy (3 % aluminum, 2.5 %
1.1.12 Grade 14—Titanium alloy (0.5 % nickel, 0.05 %
vanadium) plus 0.08 to 0.14 % ruthenium,
ruthenium),
1.1.26 Grade 29—Titanium alloy (6 % aluminum, 4 % va-
1.1.13 Grade 15—Titanium alloy (0.5 % nickel, 0.05 %
nadium with extra low interstitial elements, ELI) plus 0.08 to
ruthenium),
0.14 % ruthenium,
1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.08 %
1.1.27 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 %
palladium,
palladium),
1.1.14.1 Grade 16H—Unalloyed titanium plus 0.04 to
1.1.28 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 %
0.08 % palladium (Grade 16 with 58 ksi minimum UTS),
palladium),
1.1.29 Grade 32—Titanium alloy (5 % aluminum, 1 % tin,
1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
1
This specification is under the jurisdiction of ASTM Committee B10 on
1.1.30 Grade 33—Titanium alloy (0.4 % nickel, 0.015 %
Reactive and Refractory Metals and Alloys and is the direct responsibility of
palladium, 0.02 5 % ruthenium, 0.15 % chromium),
Subcommittee B10.01 on Titanium.
Current edition approved Sept. 1, 2011. Published September 2011. Originally
1.1.31 Grade 34—Titanium alloy (0.4 % nickel, 0.015 %
approved in 1952. Last previous edition approved in 2010 as B265 – 10. DOI:
palladium, 0.025 % ruthenium, 0.15 % chromium),
10.1520/B0265-11E01.
2
1.1.32 Grade 35—Titanium alloy (4.5 % aluminum, 2 %
For ASME Boiler and Pressure Vessel Code applications see related Specifi-
cations SB-265 in Section II of that Code. molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),
*A Summary of Changes section appears at the end of this standard
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
´1
B265−11
1.1.33 Grade 36—Titanium alloy (45 % niobium), 4.1.3 Special mechanical properties (Table 1),
1.1.34 Grade 37—Titanium alloy (1.5 % aluminum), and 4.1.4 Marking (Section 16),
1.1.35 Grade 38—Titanium alloy (4 % aluminum, 2.5 % 4.1.5 Finish (Section 8),
vanadium, 1.5 % iron). 4.1.6 Packaging (Section 16),
4.1.7 Additional required reports (Section 15), and
NOTE 1—H grade material is identical to the corresponding numeric
4.1.8 Disposition of rejected material (Section 14).
grade (that is, Grade 2H =
...