ASTM E1379-90(2022)

Standard Specification for Laboratory Glass Dewar Flask

ABSTRACT
This specification provides the material and performance requirements for glass Dewar flasks suitable for general laboratory use. Flasks shall be made of Type I, Class A borosilicate glass conforming to specified maximum residual thermal stress. The properties to which the flasks shall conform are appearance, design, capacity, and dimensions.
SCOPE
1.1 This specification provides standard material and performance requirements for glass Dewar flasks suitable for general laboratory use.  
1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

General Information

• Status: Published
• Publication Date: 31-Aug-2022
• ICS: 71.040.20 - Laboratory ware and related apparatus
• Technical Committee: E41 - Laboratory Apparatus
• Drafting Committee: E41.01 - Laboratory Ware and Supplies

Relations

• Refers: ASTM E438-92(2024) - Standard Specification for Glasses in Laboratory Apparatus
• Effective Date: 01-Feb-2024
• Refers: ASTM E438-92(2018) - Standard Specification for Glasses in Laboratory Apparatus
• Effective Date: 01-Jan-2018
• Refers: ASTM E438-92(2011) - Standard Specification for Glasses in Laboratory Apparatus
• Effective Date: 01-Dec-2011
• Refers: ASTM E671-98(2010) - Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
• Effective Date: 01-Apr-2010
• Refers: ASTM E438-92(2006) - Standard Specification for Glasses in Laboratory Apparatus
• Effective Date: 01-Nov-2006
• Refers: ASTM E671-98(2004) - Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
• Effective Date: 01-May-2004
• Refers: ASTM B85-03 - Standard Specification for Aluminum-Alloy Die Castings
• Effective Date: 10-Apr-2003
• Refers: ASTM B85-02 - Standard Specification for Aluminum-Alloy Die Castings
• Effective Date: 10-Apr-2002
• Refers: ASTM B85-99 - Standard Specification for Aluminum-Alloy Die Castings
• Effective Date: 10-Apr-2002
• Refers: ASTM E671-98 - Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus
• Effective Date: 10-Apr-1998
• Refers: ASTM E438-92(2001)e1 - Standard Specification for Glasses in Laboratory Apparatus
• Effective Date: 15-Aug-1993
• Refers: ASTM E438-92(1996) - Standard Specification for Glasses in Laboratory Apparatus
• Effective Date: 15-Aug-1993

Standards Content (Sample)

This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Designation: E1379 −90 (Reapproved 2022)
Standard Specification for
Laboratory Glass Dewar Flask
This standard is issued under the fixed designation E1379; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision.Anumber in parentheses indicates the year of last reapproval.A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
for the cubic centimetre (cm ) and similarly the litre (L) for 1000 cubic
1. Scope
centimetres, in accordance with the International System of Units (SI).
1.1 This specification provides standard material and per-
4. Material and Annealing
formance requirements for glass Dewar flasks suitable for
general laboratory use.
4.1 Flasksshallbemadeofborosilicateglassconformingto
the requirement of Type I, Class A, Specification E438.
1.2 The values stated in SI units are to be regarded as
standard. No other units of measurement are included in this
4.2 Maximum residual thermal stress shall conform to
standard.
Specification E671.
1.3 This international standard was developed in accor-
4.3 Aluminum base alloy metal shall conform to Alloy
dance with internationally recognized principles on standard-
Number A380 of Specification B85.
ization established in the Decision on Principles for the
5. Appearance
Development of International Standards, Guides and Recom-
mendations issued by the World Trade Organization Technical
5.1 The general appearance of the flasks shall conform to
Barriers to Trade (TBT) Committee.
Fig. 1.
2. Referenced Documents
6. Design
2.1 ASTM Standards:
6.1 Flasks shall be cylindrically shaped and have double
B85Specification for Aluminum-Alloy Die Castings
walls silvered on the inside. The space between the walls shall
−7
E438Specification for Glasses in Laboratory Apparatus
be evacuated to a vacuum level of 5×10 Torr and sealed.
E671Specification for Maximum Permissible Thermal Re-
Temperatures are to be held in excess of 500°C during
sidual Stress in Annealed Glass Laboratory Apparatus
evacuation.
6.2 Flasks shall be firmly cemented into the base to protect
3. Classification
the sealing tip.
3.1 Glass Dewar flasks shall be of the following sizes: 265
6.3 Flasks shall have a protective plastic mesh, or shall be
mL, 665 mL, 1000 mL, 1900 mL, 4300 mL
coated with a baked-on plastisol over exposed glass surface.
NOTE 1—The term millilitre (mL) is commonly used as a special name
7. Capacity and Dimensions
7.1 Standard Dewar flasks for government use shall con-
This specification is under
...