iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D4850-03a(2007)

(Terminology)

Standard Terminology Relating to Fabric

Standard Terminology Relating to Fabric

SCOPE
1.1 This terminology covers definitions of technical terms used in the industry related to textile fabrics. Terms that are generally understood or adequately defined in other readily available sources are not included. Other terminology standards that have terms related to textile fabrics are shown in

General Information

Status
Historical
Publication Date
30-Jun-2007
ICS
01.040.59 - Textile and leather technology (Vocabularies)
59.080.30 - Textile fabrics
Technical Committee
D13 - Textiles
Drafting Committee
D13.59 - Fabric Physical Test Methods A
Current Stage
Ref Project

Relations

Replaces
ASTM D4850-03a - Standard Terminology Relating to Fabric
Effective Date
01-Jul-2007
Replaced By
ASTM D4850-08 - Standard Terminology Relating to Fabrics and Fabric Test Methods
Effective Date
01-Jul-2008
Referred By
ASTM C1783-15 - Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
Effective Date
01-Jul-2007
Referred By
ASTM D5278/D5278M-09(2017) - Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
Effective Date
01-Jul-2007
Referred By
ASTM D123-23 - Standard Terminology Relating to Textiles
Effective Date
01-Jul-2007
Referred By
ASTM D4970/D4970M-22 - Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Martindale Tester
Effective Date
01-Jul-2007
Referred By
ASTM D5035-11(2019) - Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
Effective Date
01-Jul-2007
Referred By
ASTM D3883-04(2020) - Standard Test Method for Yarn Crimp and Yarn Take-up in Woven Fabrics
Effective Date
01-Jul-2007
Referred By
ASTM D4851-07(2019)e1 - Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
Effective Date
01-Jul-2007
Referred By
ASTM D5430-13(2017) - Standard Test Methods for Visually Inspecting and Grading Fabrics
Effective Date
01-Jul-2007
Referred By
ASTM D3884-22 - Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform Abrader Method)
Effective Date
01-Jul-2007
Referred By
ASTM C1835-16(2023) - Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures
Effective Date
01-Jul-2007
Referred By
ASTM D3939/D3939M-13(2017) - Standard Test Method for Snagging Resistance of Fabrics (Mace)
Effective Date
01-Jul-2007
Referred By
ASTM D1424-21 - Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
Effective Date
01-Jul-2007
Referred By
ASTM D3886-22 - Standard Test Method for Abrasion Resistance of Textile Fabrics (Inflated Diaphragm Apparatus)
Effective Date
01-Jul-2007

Buy Standard

ASTM D4850-03a(2007) - Standard Terminology Relating to FabricASTM D4850-03a(2007) - Standard Terminology Relating to Fabric
PreviousNext
Standard
ASTM D4850-03a(2007) - Standard Terminology Relating to Fabric
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:D4850–03a (Reapproved 2007)
Standard Terminology Relating to
1
Fabric
This standard is issued under the fixed designation D 4850; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope D 3775 Test Method for Warp End Count and Filling Pick
Count of Woven Fabric
1.1 This terminology covers definitions of technical terms
D 3786 Test Method for Bursting Strength of Textile
used in the industry related to textile fabrics. Terms that are
Fabrics—Diaphragm Bursting Strength Tester Method
generally understood or adequately defined in other readily
D 3787 Test Method for Bursting Strength of Textiles—
available sources are not included. Other terminology stan-
Constant-Rate-of-Traverse (CRT) Ball Burst Test
dards that have terms related to textile fabrics are shown in 2.1
D 3789 Practice for Labeling Cans of Consumer Spray
2
2. Referenced Documents
Paint
D 3882 Test Method for Bow and Skew in Woven and
2.1 ASTM Standards:
Knitted Fabrics
D 737 Test Method for Air Permeability of Textile Fabrics
D 3883 Test Methods for Yarn Crimp and Yarn Take-up in
D 1117 Guide for Evaluating Nonwoven Fabrics
Woven Fabrics
D 1336 Test Method for Distortion of Yarn in Woven
D 3884 Guide for Abrasion Resistance of Textile Fabrics
Fabrics
(Rotary Platform, Double-Head Method)
D 1388 Test Method for Stiffness of Fabrics
D 3885 Test Method for Abrasion Resistance of Textile
D 1424 Test Method for Tearing Strength of Fabrics by
Fabrics (Flexing and Abrasion Method)
Falling-Pendulum Type (Elmendorf) Apparatus
D 3886 Test Method for Abrasion Resistance of Textile
D 1775 Test Method for Tension and Elongation of Wide
2
Fabrics (Inflated Diaphragm Apparatus)
Elastic Fabrics
D 3887 Specification for Tolerances for Knitted Fabrics
D 1777 Test Method for Thickness of Textile Materials
D 3939 Test Method for Snagging Resistance of Fabrics
D 2261 Test Method for Tearing Strength of Fabrics by the
(Mace)
Tongue (Single Rip) Procedure (Constant-Rate-of-
D 3990 Terminology Relating to Fabric Defects
Extension Tensile Testing Machine)
D 4032 Test Method for Stiffness of Fabric by the Circular
D 2594 Test Method for Stretch Properties of Knitted Fab-
Bend Procedure
rics Having Low Power
D 4033 Test Method for Resistance to Yarn Slippage at the
D 2646 Test Methods for Backing Fabric Characteristics of
Sewn Seam in Upholstery Fabrics (Dynamic Fatigue
Pile Yarn Floor Coverings
2
Method) (Discontinued 2001)
D 3107 Test Methods for Stretch Properties of Fabrics
D 4034 Test Method for Resistance to Yarn Slippage at the
Woven from Stretch Yarns
Sewn Seam in Woven Upholstery Fabrics (Discontinued
D 3511 Test Method for Pilling Resistance and Other Re-
2
2001)
lated Surface Changes of Textile Fabrics: Brush Pilling
D 4157 Test Method for Abrasion Resistance of Textile
Tester
Fabrics (Oscillatory Cylinder Method)
D 3512 Test Method for Pilling Resistance and Other Re-
D 4158 Guide for Abrasion Resistance of Textile Fabrics
lated Surface Changes ofTextile Fabrics: RandomTumble
(Uniform Abrasion)
Pilling Tester
D 4390 Practice for the Evaluation of the Performance of
D 3514 Test Method for Pilling Resistance and Other Re-
2
Terry Bathroom Products for Home Use
lated Surface Changes of Textile Fabrics: Elastomeric Pad
D 4772 Test Method for Surface WaterAbsorption of Terry
D 3773 Test Methods for Length of Woven Fabric
Fabrics (Water Flow)
D 3774 Test Method for Width of Textile Fabric
D 4350 Test Method for Corrosivity Index of Plastics and
Fillers
1
ThisterminologyisunderthejurisdictionofASTMCommitteeD13onTextiles
D 4685 Test Method for Pile Fabric Abrasion
and is the direct responsibility of Subcommittee D13.59 on Fabric Test Methods,
D 4848 Terminology of Force, Deformation and Related
General.
Properties of Textiles
Current edition approved July 1, 2007. Published August 2007. Originally
approved in 1989. Last previous edition approved in 2003 as D 4850 – 03a.
2
Withdrawn.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
D4850–03a (2007)
D 4850 Terminology Relating to Fabric secured and primarily supported and held in place by air
D 4851 Test Methods for Coated and Laminated Fabrics for pressure. D 4851
Architectural Use
architectural-use, n—in the building trade, a descriptive term
D 4964 Test Method for Tension and Elongation of Elastic
for fabrics used in fabric roof-systems or similar industrial
Fabrics (Constant-Rate-of-Extension Type Tensile Testing
applications. (See also fabric roof-system.) D 4851
Machine)
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D4850-23(Terminology)
Standard Terminology Relating to Fabrics and Fabric Test Methods

SCOPE
1.1 This terminology covers definitions of technical terms used in the industry related to textile fabrics. Terms that are generally understood or adequately defined in other readily available sources are not included. Other terminology standards that have terms related to textile fabrics are shown in 2.1  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
ASTM
ASTM D7722-22(Terminology)
Standard Terminology Relating to Assembly of Textile Structures

SCOPE
1.1 This terminology identifies industrial terms related to stitches and seams that are used for the assembly of textile structures.  
1.2 Section 3, Terminology, is categorized into two subsections, specific to the two areas of specialization under this document.  
1.2.1 Section 3.1 Relating to Seams.  
1.2.2 Section 3.2 Relating to Stitches.  
1.3 For other terms relating to textiles refer to Terminology D123.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D3990-12(2020)(Terminology)
Standard Terminology Relating to Fabric Defects

SCOPE
1.1 This terminology covers defects in both woven and knit fabrics. Descriptions of the defects, illustrations, and related material are given under the most frequently used terms; synonym(s) are listed in parentheses and cross referenced.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    8 pages
    English language
    sale 15% off
ASTM
ASTM D4850-23(Terminology)
Standard Terminology Relating to Fabrics and Fabric Test Methods

SCOPE
1.1 This terminology covers definitions of technical terms used in the industry related to textile fabrics. Terms that are generally understood or adequately defined in other readily available sources are not included. Other terminology standards that have terms related to textile fabrics are shown in 2.1  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    11 pages
    English language
    sale 15% off
  • Standard
    11 pages
    English language
    sale 15% off
ASTM
ASTM D7722-22(Terminology)
Standard Terminology Relating to Assembly of Textile Structures

SCOPE
1.1 This terminology identifies industrial terms related to stitches and seams that are used for the assembly of textile structures.  
1.2 Section 3, Terminology, is categorized into two subsections, specific to the two areas of specialization under this document.  
1.2.1 Section 3.1 Relating to Seams.  
1.2.2 Section 3.2 Relating to Stitches.  
1.3 For other terms relating to textiles refer to Terminology D123.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    3 pages
    English language
    sale 15% off
  • Standard
    3 pages
    English language
    sale 15% off
ASTM
ASTM D3990-12(2020)(Terminology)
Standard Terminology Relating to Fabric Defects

SCOPE
1.1 This terminology covers defects in both woven and knit fabrics. Descriptions of the defects, illustrations, and related material are given under the most frequently used terms; synonym(s) are listed in parentheses and cross referenced.  
1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    8 pages
    English language
    sale 15% off
ASTM
ASTM F1210-23(Guide)
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

SIGNIFICANCE AND USE
3.1 This guide is meant to aid response teams who may use it during spill response planning and spill events.  
3.2 This guide should be adapted to site specific circumstance.
SCOPE
1.1 This guide covers the use of oil spill dispersants to assist in the control of oil spills. The guide is written with the goal of minimizing the environmental impacts of oil spills; this goal is the basis on which the recommendations are made. Aesthetic and socioeconomic factors are not considered, although these and other factors are often important in spill response.  
1.2 Spill responders have available several means to control or clean up spilled oil. Chemical dispersants should be given equal consideration with other spill countermeasures.  
1.3 This is a general guide only. Oil, as used in this guide, includes crude oils and refined petroleum products. Differences between individual dispersants or between different oil products are not considered. The dispersibility of the oil with the chosen dispersant should be evaluated.  
1.4 The guide is organized by habitat type, for example, small ponds and lakes, rivers and streams, and land. It considers the use of dispersants primarily to protect habitats from impact (or to minimize impacts).  
1.5 This guide applies only to freshwater and other inland environments. It does not consider the direct application of dispersants to subsurface waters.  
1.6 In making dispersant use decisions, appropriate government authorities should be consulted as required by law.  
1.7 This guide does not address getting regulatory approval.  
1.8 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    3 pages
    English language
    sale 15% off
  • Guide
    3 pages
    English language
    sale 15% off
ASTM
ASTM C596-23(Test Method)
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

SIGNIFICANCE AND USE
4.1 This test method establishes a selected set of conditions of temperature, relative humidity and rate of evaporation of the environment to which a mortar specimen of stated composition shall be subjected for a specified period of time during which its change in length is determined and designated “drying shrinkage.”  
4.2 The drying shrinkage of mortar as determined by this test method has a linear relation to the drying shrinkage of concrete made with the same cement and exposed to the same drying conditions.4 Hence this test method may be used when it is desired to develop data on the effect of a hydraulic cement on the drying shrinkage of concrete made with that cement.
SCOPE
1.1 This test method determines the change in length on drying of mortar bars containing hydraulic cement and graded standard sand.  
1.2 The values stated in SI units are to be regarded as standard. When combined standards are referenced, the selection of measurement system is at the user’s discretion subject to the requirements of the referenced standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure).2  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D1751-23(Specification)
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Asphalt Types)

SCOPE
1.1 This specification covers preformed expansion joint filler having relatively little extrusion and substantial recovery after release from compression.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
Note 1: Attention is called to Specifications D1752 and D994/D994M.  
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM B637-23(Specification)
Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

ABSTRACT
This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for high-temperature service. Chemical analysis shall be performed on the alloy and shall conform to the chemical composition requirement in carbon, manganese, silicon, phosphorus, sulfur, chromium, cobalt, molybdenum, columbium, tantalum, titanium, aluminum, zirconium, boron, iron, copper, and nickel. The material shall follow recommended annealing treatment, solution treatment, stabilizing treatment, and precipitation hardening treatment. Tension testing, hardness testing and stress-rupture testing shall be performed on the material and shall comply to the required tensile strength, yield strength, elongation, reduction in area, and Brinell hardness.
SCOPE
1.1 This specification2 covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for moderate or high temperature service (Table 1).  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off