Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

SCOPE
1.1 This specification covers annealed titanium and titanium alloy strip, sheet, and plate as follows:
1.1.1 Grade 1—Unalloyed titanium,
1.1.2 Grade 2—Unalloyed titanium,
1.1.3 Grade 3—Unalloyed titanium,
1.1.4 Grade 4—Unalloyed titanium,
1.1.5 Grade 5—Titanium alloy (6 % aluminum, 4 % vanadium),
1.1.6 Grade 6—Titanium alloy (5 % aluminum, 2.5 % tin),
1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.8 Grade 9—Titanium alloy (3.0 % aluminum, 2.5 % vanadium),
1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.10 Grade 12—Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.11 Grade 13—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.12 Grade 14—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.13 Grade 15—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.16 Grade 18—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium.
1.1.17 Grade 19—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1.18 Grade 20—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 % to 0.08 % palladium,
1.1.19 Grade 21—Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),
1.1.20 Grade 23—Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI),
1.1.21 Grade 24—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,
1.1.22 Grade 25—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium,
1.1.23 Grade 26—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.24 Grade 27—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.25 Grade 28—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,
1.1.26 Grade 29Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI) plus 0.08 to 0.14 % ruthenium,
1.1.27 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.28 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.29 Grade 32Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
1.1.30 Grade 33—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.02 5 % ruthenium, 0.15 % chromium),
1.1.31 Grade 34—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium), and
1.1.32 Grade 35—Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon).
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

General Information

Status
Historical
Publication Date
09-Oct-2002
Current Stage
Ref Project

Relations

Buy Standard

Technical specification
ASTM B265-02 - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
English language
8 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn. Contact ASTM
International (www.astm.org) for the latest information.
Designation: B 265 – 02
Standard Specification for
1
Titanium and Titanium Alloy Strip, Sheet, and Plate
This standard is issued under the fixed designation B 265; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope 1.1.19 Grade 21—Titanium alloy (15 % molybdenum, 3 %
2 aluminum, 2.7 % niobium, 0.25 % silicon),
1.1 This specification covers annealed titanium and tita-
1.1.20 Grade 23—Titanium alloy (6 % aluminum, 4 %
nium alloy strip, sheet, and plate as follows:
vanadium with extra low interstitial elements, ELI),
1.1.1 Grade 1—Unalloyed titanium,
1.1.21 Grade 24—Titanium alloy (6 % aluminum, 4 %
1.1.2 Grade 2—Unalloyed titanium,
vanadium) plus 0.04 % to 0.08 % palladium,
1.1.3 Grade 3—Unalloyed titanium,
1.1.22 Grade 25—Titanium alloy (6 % aluminum, 4 %
1.1.4 Grade 4—Unalloyed titanium,
vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 %
1.1.5 Grade 5—Titanium alloy (6 % aluminum, 4 % vana-
palladium,
dium),
1.1.23 Grade 26—Unalloyed titanium plus 0.08 to 0.14 %
1.1.6 Grade 6—Titanium alloy (5 % aluminum, 2.5 % tin),
ruthenium,
1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.25 %
1.1.24 Grade 27—Unalloyed titanium plus 0.08 to 0.14 %
palladium,
ruthenium,
1.1.8 Grade 9—Titanium alloy (3.0 % aluminum, 2.5 %
1.1.25 Grade 28—Titanium alloy (3 % aluminum, 2.5 %
vanadium),
vanadium) plus 0.08 to 0.14 % ruthenium,
1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.25 %
1.1.26 Grade 29—Titanium alloy (6 % aluminum, 4 %
palladium,
vanadiumwithextralowinterstitialelements,ELI)plus0.08to
1.1.10 Grade 12—Titanium alloy (0.3 % molybdenum,
0.14 % ruthenium,
0.8 % nickel),
1.1.27 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 %
1.1.11 Grade 13—Titanium alloy (0.5 % nickel, 0.05 %
palladium),
ruthenium),
1.1.28 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 %
1.1.12 Grade 14—Titanium alloy (0.5 % nickel, 0.05 %
palladium),
ruthenium),
1.1.29 Grade 32—Titanium alloy (5 % aluminum, 1 % tin,
1.1.13 Grade 15—Titanium alloy (0.5 % nickel, 0.05 %
1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
ruthenium),
1.1.30 Grade 33—Titanium alloy (0.4 % nickel, 0.015 %
1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.08 %
palladium, 0.02 5 % ruthenium, 0.15 % chromium),
palladium,
1.1.31 Grade 34—Titanium alloy (0.4 % nickel, 0.015 %
1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.08 %
palladium, 0.025 % ruthenium, 0.15 % chromium), and
palladium,
1.1.32 Grade 35—Titanium alloy (4.5 % aluminum, 2 %
1.1.16 Grade 18—Titanium alloy (3 % aluminum, 2.5 %
molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon).
vanadium) plus 0.04 to 0.08 % palladium.
1.2 The values stated in inch-pound units are to be regarded
1.1.17 Grade 19—Titanium alloy (3 % aluminum, 8 %
as the standard. The values given in parentheses are for
vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
information only.
1.1.18 Grade 20—Titanium alloy (3 % aluminum, 8 %
vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum)
2. Referenced Documents
plus 0.04 % to 0.08 % palladium,
2.1 ASTM Standards:
3
E8 Test Methods forTensionTesting of Metallic Materials
1
This specification is under the jurisdiction of ASTM Committee B10 on
E29 Practice for Using Significant Digits in Test Data to
Reactive and Refractory Metals and Alloys and is the direct responsibility of 4
Determine Conformance with Specifications
Subcommittee B10.01 on Titanium.
Current edition approved Oct. 10, 2002. Published December 2002. Originally
e1
published as B 265 – 52 T. Last previous edition B 265 – 99 .
2 3
For ASME Boiler and Pressure Vessel Code applications see related Specifi- Annual Book of ASTM Standards, Vol 03.01.
4
cations SB-265 in Section II of that Code. Annual Book of ASTM Standards, Vol 14.02.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn. Contact ASTM
International (www.astm.org) for the latest information.
B265–02
E 120 Test Methods for ChemicalAnalysis of Titanium and 4. Ordering Information
5
Titanium Alloys
4.1 Orders for materials under this specification shall in-
E 190 Test Method for Guided Bend Test for Ductility of
clude the following information as applicable:
3
Welds
4.1.1 Grade number (Section 1),
E 1409 Test Method for Determination of Oxygen in Tita-
4.1.2 Product limitations (Section 3),
nium and Titanium Alloys by the Inert Gas Fusion Tech-
4.1.3 Special mechanica
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.