iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM E2681-13

(Guide)

Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum

Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum

SIGNIFICANCE AND USE
4.1 Environmentally sound management of underground storage tank systems involves a broad range of activities directed toward preventing accidental releases of petroleum or hazardous substances, and effectively detecting and responding to such releases when, and if, they do occur. Numerous technical guidelines are presently available addressing specific procedures for release prevention and response for underground tank systems, including guidelines for tank system design, installation and maintenance, leak detection and spill control, corrective action for affected environmental media, tank system closure, and personnel training. This guide presents an overview, identifying key management considerations and referring the user to other related ASTM standards and industry guidelines for more detailed information.  
4.2 Tank System Design and Installation—The first step in environmentally sound management of tank systems is to design and install the tank system so as to minimize the potential for release of petroleum or hazardous substances to the environment. This guide addresses key considerations related to the types of tank systems to be used, compatibility of regulated substances to construction materials, types of spill containment and overfill prevention devices, corrosion protection, proper installation practices, and system inspection and maintenance.  
4.3 Preventative Maintenance and Inspection Plan—Even for properly designed and installed tank systems, practical measures are needed to detect and terminate releases in a timely manner so as to minimize regulated substance losses and associated environmental effects. This guide reviews general release detection measures, possible indicators of a release, appropriate record-keeping procedures, leak detection system inspection and maintenance, and response planning and release control measures.  
4.4 Fueling Procedure—Careful loading, unloading, and dispensing of liquids to and from underground storage tanks...
SCOPE
1.1 The framework discussed in this guide is limited to facilities with underground storage tanks (USTs) storing hazardous substances or petroleum at ambient temperature and atmospheric pressure. This guide is not intended to provide detailed technical specifications for implementation of the approaches described in this document, nor to be used as an enforcement tool, but rather to identify the important information used for environmental management of underground tank systems. The term “must” is used where United States federal requirements apply. References to ASTM standards and other industry guidelines have been provided to address implementation of the approaches discussed in this guide. Many states and some local agencies have adopted UST rules that place additional responsibilities on the owners/operators of UST systems. Refer to state and local regulations that may contain additional requirements. It is not possible to identify all considerations or combinations of conditions pertinent to a unique underground storage tank system.  
1.2 This guide addresses principal considerations related to the prevention and response for environmental releases from tank systems and is organized in the sections listed below:    
Section 1:  
Scope  
Section 2:  
Lists relevant ASTM Standards and other industry or regulatory guidance documents  
Section 3:  
Defines the key terminology used in this guide  
Section 4:  
Describes the significance and use of this guide  
Section 5:  
Tank System Design and Installation    
Section 6:  
Preventive Maintenance and Inspection Plan    
Section 7:  
Fueling Procedure  
Section 8:  
Corrective Action for Affected Environmental Media  
Section 9:  
Tank System Closure  
Section 10:  
Tank Management Practice Education and Training  
Appendix X1:  
Recurring Release Detection and Cathodic Protection Requirements (Quick Glance) is intend...

General Information

Status
Historical
Publication Date
31-Jan-2013
ICS
23.020.10 - Stationary containers and tanks
Technical Committee
E50 - Environmental Assessment, Risk Management and Corrective Action
Drafting Committee
E50.01 - Storage Tanks
Current Stage
Ref Project

Buy Standard

ASTM E2681-13 - Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or PetroleumASTM E2681-13 - Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum
PreviousNext
Guide
ASTM E2681-13 - Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Hazardous Substances or Petroleum
English language
17 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: E2681 − 13
Standard Guide for
Environmental Management of Underground Storage Tank
1
Systems Storing Hazardous Substances or Petroleum
This standard is issued under the fixed designation E2681; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
INTRODUCTION
This guide provides an overview of environmental practices for design, installation, operation and
maintenance, and corrective action for underground tank systems used for storage of hazardous
substances and petroleum products. The training and application of these practices should serve to
prevent accidental releases of petroleum or hazardous substances from underground storage tank
systems and to facilitate effective detection and response when and if such releases do occur. The
guide is intended for use by tank system owners and operators and other persons concerned with
practices for prevention and control of environmental releases and remediation of affected environ-
mental media. The guide provides an overview of environmentally sound management practices,
identifying key management considerations and referring the user to other related ASTM standards
and industry guidelines for more detailed information. All personal safety considerations are not
addressed in this guide, and it is the responsibility of the user to identify relevant safety and health
protection practices and regulations related to tank system management. Caution is warranted due to
the flammable or combustible property of some materials stored in underground storage tanks. Fire
codes should be followed.
1. Scope considerations or combinations of conditions pertinent to a
unique underground storage tank system.
1.1 The framework discussed in this guide is limited to
facilities with underground storage tanks (USTs) storing haz-
1.2 This guide addresses principal considerations related to
ardous substances or petroleum at ambient temperature and
the prevention and response for environmental releases from
atmospheric pressure. This guide is not intended to provide
tank systems and is organized in the sections listed below:
detailed technical specifications for implementation of the
approaches described in this document, nor to be used as an
Section 1: Scope
enforcement tool, but rather to identify the important informa- Section 2: Lists relevant ASTM Standards and other industry
or regulatory guidance documents
tion used for environmental management of underground tank
Section 3: Defines the key terminology used in this guide
systems. The term “must” is used where United States federal
Section 4: Describes the significance and use of this guide
requirements apply. References to ASTM standards and other Section 5: Tank System Design and Installation
Section 6: Preventive Maintenance and Inspection Plan
industry guidelines have been provided to address implemen-
Section 7: Fueling Procedure
tation of the approaches discussed in this guide. Many states
Section 8: Corrective Action for Affected Environmental
and some local agencies have adopted UST rules that place Media
Section 9: Tank System Closure
additional responsibilities on the owners/operators of UST
Section 10: Tank Management Practice Education and
systems. Refer to state and local regulations that may contain
Training
Appendix X1: Recurring Release Detection and Cathodic
additional requirements. It is not possible to identify all
Protection Requirements (Quick Glance) is
intended to be a quick reference guide for
1
monitoring information
ThisguideisunderthejurisdictionofASTMCommitteeE50onEnvironmental
Related Material: Documents related to environmental management
Assessment, Risk Management and CorrectiveAction and is the direct responsibil-
of underground storage tanks
ity of Subcommittee E50.01 on Storage Tanks.
Current edition approved Feb. 1, 2013. Published March 2013. DOI: 10.1520/
E2681-13.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
E2681 − 13
1.3 The values stated in inch-pound units are to be regarded UL 971 Standard for Nonmetallic Underground Piping for
as standard. No other units of measurement are included in this Flammable Liquids
standard. UL 1316 Glass-Fiber-Reinforced Plastic Underground Stor-
ageTanks for Petroleum Products,Alcohols, andAlcohol-
1.4 This standard does not purport to address all of the
Gasoline Mixtures
safety concerns, if any, associated with its use. It is the
UL 1746 Standard for External Corrosion Protection Sys-
responsibility of the user of t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM E1990-22(Guide)
Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations

SIGNIFICANCE AND USE
4.1 This guide is an educational tool for tank owners, operators, and other users and is not intended for use in certifying compliance with the Federal technical standards for underground storage tanks.  
4.2 The intent of this guide is to provide an overview of the general requirements. This guide is intended for users who are generally familiar with the requirements of 40 CFR Part 280. The user is advised that this guide does not contain the level of detail necessary to make the determination of whether specific equipment or services meet the detailed technical performance requirements of 40 CFR Part 280.  
4.3 This guide does not cover state and local requirements, that can be more stringent than the federal rules. Owners and operators are responsible for meeting federal, state, and, in some circumstances, local requirements. It is recommended that owners and operators familiarize themselves with these requirements as well.  
4.4 Owners or operators may use the sample checklist in Appendix X1 to assist them in determining operational conformance or they may develop their own checklist based upon this guide.  
4.5 This guide and accompanying appendixes are not intended to be used by state or local UST program authorities as a regulatory or administrative requirement for owners or operators. Use of this guide and appendixes by owners and operators is intended to be a voluntary educational tool for the purposes described in 4.1.
SCOPE
1.1 This guide covers information for evaluating tank systems for operational conformance with the Federal technical standards (including the financial responsibility requirements) for underground storage tanks (USTs) found at 40 Code of Federal Register (CFR) Part 280.  
1.2 This guide does not address the corrective action requirements of 40 CFR Part 280.  
1.3 To the extent that a tank system is excluded or deferred from the federal regulations under Subpart A of 40 CFR Part 280, it is not covered by this guide.  
1.4 Local regulations may be more stringent than federal regulation and the reader should refer to the implementing agency to determine compliance.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    12 pages
    English language
    sale 15% off
  • Guide
    12 pages
    English language
    sale 15% off
ASTM
ASTM E2681-21(Guide)
Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Regulated Substances

SIGNIFICANCE AND USE
4.1 Environmentally sound management of underground storage tank systems involves a broad range of preventative maintenance activities directed toward preventing accidental releases of regulated substances, and effectively detecting and responding to such releases when, and if, they do occur. Numerous technical guidelines are presently available addressing specific procedures for release prevention and response for underground tank systems, including guidelines for tank system design, installation, operation and maintenance, leak detection, spill control, periodic equipment inspections, corrective action for affected environmental media, tank system closure, and operator training. This guide presents an overview, identifying key management considerations and referring the user to other related ASTM standards and industry guidelines for more detailed information.  
4.2 Tank System Design and Installation—The first step in environmentally sound management of tank systems is to design and install the tank system so as to minimize the potential for release of regulated substances to the environment. This guide addresses key considerations related to the types of tank systems to be used, compatibility of regulated substances to construction materials, types of spill containment and overfill prevention devices, corrosion protection, leak detection proper installation practices, and system operation.  
4.3 Preventative Maintenance—Even for properly designed and installed tank systems, practical measures are needed to detect and terminate leaks and respond to releases in a timely manner so as to minimize regulated substance losses and associated environmental effects. This guide reviews general considerations including release detection measures, possible indicators of a release, appropriate record-keeping procedures, tank system inspection, equipment testing, response planning and release control measures. Some preventative maintenance activities are recommended while ot...
SCOPE
1.1 The framework discussed in this guide is limited to facilities with underground storage tanks (USTs) storing regulated substances at ambient temperature and atmospheric pressure. This guide is not intended to provide detailed technical specifications for implementation of the approaches described in this document, nor to be used as an enforcement tool, but rather to identify the important information used for environmental management of underground tank systems. The term “must” is used where United States federal requirements apply. References to ASTM standards and other industry guidelines have been provided to address implementation of the approaches discussed in this guide. Many states and some local agencies have adopted rules that place additional responsibilities on the owners/operators of UST systems. Refer to state and local regulations that may contain additional requirements. It is not possible to identify all considerations or combinations of conditions pertinent to a unique underground storage tank system.  
1.2 This guide addresses principal considerations related to the prevention of, and response to environmental releases from tank systems and is organized in the sections listed below:    
Section 1:  
Scope  
Section 2:  
Lists relevant ASTM Standards and other industry or regulatory guidance documents  
Section 3:  
Defines the key terminology used in this guide  
Section 4:  
Describes the significance and use of this guide  
Section 5:  
Tank System Design and Installation    
Section 6:  
Preventive Maintenance and Inspection Plan    
Section 7:  
Fueling Procedure  
Section 8:  
Dispensing Activities  
Section 9:  
Release Response Plan  
Section 10:  
Corrective Action for Affected Environmental Media  
Section 11:  
Tank System Closure  
Section 12:  
UST Management Practice and Operator Training  
Appendix X1:  
Recurring Release Det...

  • Guide
    19 pages
    English language
    sale 15% off
  • Guide
    19 pages
    English language
    sale 15% off
ASTM
ASTM D4865-23(Guide)
Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

SIGNIFICANCE AND USE
4.1 Pumping, filtering, and tank filling of petroleum products, particularly refined distillates, can cause the generation and accumulation of electrostatic charges and can result in static discharges capable of causing fires and explosions. This guide provides an overview of the factors involved in the generation of such electrostatic charges. Methods are described for the alleviation of the problem, and cited authoritative references contain more details.  
4.2 This guide is not intended to provide operating or safety rules for the handling of petroleum products to avoid electrostatic hazards.
SCOPE
1.1 This guide describes how static electricity may be generated in petroleum fuel systems, the types of equipment conducive to charge generation, and methods for the safe dissipation of such charges. This guide is intended to increase awareness of potential operating problems and hazards resulting from electrostatic charge accumulation.  
1.2 This guide is not intended to provide specific solutions but indicates available techniques the user may wish to investigate to alleviate electrostatic charges. This guide does not cover the effects of stray currents or of lightning, either of which can also produce sparks leading to fires or explosions.  
1.3 This guide is not intended to address detailed safety practices associated with static electricity in petroleum product systems.  
1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    8 pages
    English language
    sale 15% off
  • Guide
    8 pages
    English language
    sale 15% off
ASTM
ASTM F2649-14(2023)(Specification)
Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks

ABSTRACT
This specification covers the material, design, structural performance, and manufacturing practice requirements for monolithic or sectional corrugated high density polyethylene (HDPE) grease interceptor tanks that are placed between commercial food service (kitchen) drains and sanitary sewer interceptors to minimize the impact of commercial food service effluent containing grease, oils, soap scum and other typical commercial food service wastes on the sanitary sewer system. This specification also covers pipe and fittings for horizontally laid corrugated HDPE grease interceptor tanks. Tanks shall be tested for leakage by performing either vacuum testing or water-pressure testing. All bell and spigot joints shall also be tested as specified.
SCOPE
1.1 This specification covers material, design, structural performance, and manufacturing practice requirements for monolithic or sectional corrugated polyethylene grease interceptor tanks with volumes equal to or greater than 333 gal (1260 L).  
1.2 The corrugated high density polyethylene (HDPE) grease interceptor tanks are placed between commercial food service (kitchen) drains and sanitary sewer interceptors to minimize the impact of commercial food service effluent containing grease, oils, soap scum and other typical commercial food service wastes on the sanitary sewer system. Typical sources of commercial kitchen effluent are scullery sinks, pot and pan sinks, dishwashers, soup kettles and floor drains where grease containing materials may exist.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This specification covers pipe and fittings for horizontally laid corrugated HDPE grease interceptor tanks as illustrated in Fig. 1.  
FIG. 1 Standard Corrugated HDPE Grease Interceptor  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    4 pages
    English language
    sale 15% off
ASTM
ASTM F2438-04(2022)(Specification)
Standard Specification for Oil Spill Response Boom Connection: Slide Connector

SIGNIFICANCE AND USE
5.1 The general design geometry herein defined applies to both a separate adaptor accessory mating two booms of different geometry as well as boom end connectors (see Terminology F818).  
5.2 Interconnectibility is intended to facilitate mating of oil spill response booms of various sizes, strengths, design, and manufacture.  
5.3 The use of this general design geometry in no way guarantees the effective performance of the linked boom sections, since each boom’s design and the environmental conditions at each incident govern overall performance.
SCOPE
1.1 This specification covers design criteria requirements, design geometry, material characteristics, and desirable features for oil spill response boom slide connections. These criteria are intended to define minimum mating characteristics and are not intended to be restricted to a specific configuration.  
1.2 The specification defines the geometry required to mate with typical Universal slide connectors or Specification F962 connectors with web thickness up to 0.3 in. Some very heavy-duty or PVC connectors may exceed this dimension and not be compatible.  
1.3 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
ASTM
ASTM E1990-22(Guide)
Standard Guide for Performing Evaluations of Underground Storage Tank Systems for Operational Conformance with 40 CFR, Part 280 Regulations

SIGNIFICANCE AND USE
4.1 This guide is an educational tool for tank owners, operators, and other users and is not intended for use in certifying compliance with the Federal technical standards for underground storage tanks.  
4.2 The intent of this guide is to provide an overview of the general requirements. This guide is intended for users who are generally familiar with the requirements of 40 CFR Part 280. The user is advised that this guide does not contain the level of detail necessary to make the determination of whether specific equipment or services meet the detailed technical performance requirements of 40 CFR Part 280.  
4.3 This guide does not cover state and local requirements, that can be more stringent than the federal rules. Owners and operators are responsible for meeting federal, state, and, in some circumstances, local requirements. It is recommended that owners and operators familiarize themselves with these requirements as well.  
4.4 Owners or operators may use the sample checklist in Appendix X1 to assist them in determining operational conformance or they may develop their own checklist based upon this guide.  
4.5 This guide and accompanying appendixes are not intended to be used by state or local UST program authorities as a regulatory or administrative requirement for owners or operators. Use of this guide and appendixes by owners and operators is intended to be a voluntary educational tool for the purposes described in 4.1.
SCOPE
1.1 This guide covers information for evaluating tank systems for operational conformance with the Federal technical standards (including the financial responsibility requirements) for underground storage tanks (USTs) found at 40 Code of Federal Register (CFR) Part 280.  
1.2 This guide does not address the corrective action requirements of 40 CFR Part 280.  
1.3 To the extent that a tank system is excluded or deferred from the federal regulations under Subpart A of 40 CFR Part 280, it is not covered by this guide.  
1.4 Local regulations may be more stringent than federal regulation and the reader should refer to the implementing agency to determine compliance.  
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    12 pages
    English language
    sale 15% off
  • Guide
    12 pages
    English language
    sale 15% off
ASTM
ASTM C1613-22(Specification)
Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks

ABSTRACT
This specification covers design requirements, manufacturing practices, and performance requirements for monolithic or sectional precast concrete grease interceptor tanks. This standard describes precast concrete tanks installed to separate fats, oils, grease, soap scum, and other typical kitchen wastes associated with the food service industry. The different materials and manufacturing practices of precast concrete grease interceptor tanks are presented in details. Structural design of grease interceptor tanks shall be by calculation or by performance. The different structural design requirement of grease interceptor tanks includes; concrete strength, reinforcing steel placement, and openings. The different physical design requirements of grease interceptor tanks includes; capacity, shape, compartments, inlet and outlet pipes, baffles and outlet devices, and top slab openings. Testing for watertightness shall be performed using either vacuum testing or hydrostatic testing.
SCOPE
1.1 This specification covers design requirements, manufacturing practices, and performance requirements for monolithic or sectional precast concrete grease interceptor tanks.  
1.2 This specification describes precast concrete tanks installed to separate fats, oils, grease, soap scum, and other typical kitchen wastes associated with the food service industry.  
1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    5 pages
    English language
    sale 15% off
  • Technical specification
    5 pages
    English language
    sale 15% off
ASTM
ASTM E2681-21(Guide)
Standard Guide for Environmental Management of Underground Storage Tank Systems Storing Regulated Substances

SIGNIFICANCE AND USE
4.1 Environmentally sound management of underground storage tank systems involves a broad range of preventative maintenance activities directed toward preventing accidental releases of regulated substances, and effectively detecting and responding to such releases when, and if, they do occur. Numerous technical guidelines are presently available addressing specific procedures for release prevention and response for underground tank systems, including guidelines for tank system design, installation, operation and maintenance, leak detection, spill control, periodic equipment inspections, corrective action for affected environmental media, tank system closure, and operator training. This guide presents an overview, identifying key management considerations and referring the user to other related ASTM standards and industry guidelines for more detailed information.  
4.2 Tank System Design and Installation—The first step in environmentally sound management of tank systems is to design and install the tank system so as to minimize the potential for release of regulated substances to the environment. This guide addresses key considerations related to the types of tank systems to be used, compatibility of regulated substances to construction materials, types of spill containment and overfill prevention devices, corrosion protection, leak detection proper installation practices, and system operation.  
4.3 Preventative Maintenance—Even for properly designed and installed tank systems, practical measures are needed to detect and terminate leaks and respond to releases in a timely manner so as to minimize regulated substance losses and associated environmental effects. This guide reviews general considerations including release detection measures, possible indicators of a release, appropriate record-keeping procedures, tank system inspection, equipment testing, response planning and release control measures. Some preventative maintenance activities are recommended while ot...
SCOPE
1.1 The framework discussed in this guide is limited to facilities with underground storage tanks (USTs) storing regulated substances at ambient temperature and atmospheric pressure. This guide is not intended to provide detailed technical specifications for implementation of the approaches described in this document, nor to be used as an enforcement tool, but rather to identify the important information used for environmental management of underground tank systems. The term “must” is used where United States federal requirements apply. References to ASTM standards and other industry guidelines have been provided to address implementation of the approaches discussed in this guide. Many states and some local agencies have adopted rules that place additional responsibilities on the owners/operators of UST systems. Refer to state and local regulations that may contain additional requirements. It is not possible to identify all considerations or combinations of conditions pertinent to a unique underground storage tank system.  
1.2 This guide addresses principal considerations related to the prevention of, and response to environmental releases from tank systems and is organized in the sections listed below:    
Section 1:  
Scope  
Section 2:  
Lists relevant ASTM Standards and other industry or regulatory guidance documents  
Section 3:  
Defines the key terminology used in this guide  
Section 4:  
Describes the significance and use of this guide  
Section 5:  
Tank System Design and Installation    
Section 6:  
Preventive Maintenance and Inspection Plan    
Section 7:  
Fueling Procedure  
Section 8:  
Dispensing Activities  
Section 9:  
Release Response Plan  
Section 10:  
Corrective Action for Affected Environmental Media  
Section 11:  
Tank System Closure  
Section 12:  
UST Management Practice and Operator Training  
Appendix X1:  
Recurring Release Det...

  • Guide
    19 pages
    English language
    sale 15% off
  • Guide
    19 pages
    English language
    sale 15% off
ASTM
ASTM G158-98(2021)(Guide)
Standard Guide for Three Methods of Assessing Buried Steel Tanks

SIGNIFICANCE AND USE
4.1 This guide provides three methods for determining the suitability of a buried steel tank to be upgraded with cathodic protection.  
4.2 This guide may be used to assess any UST, including non-regulated USTs.  
4.3 This guide provides three alternative methods but does not recommend any specific method or application. The responsibility for selection of a method rests with the user.  
4.4 This guide has specific requirements for vendor provided information which should be requested and reviewed by the user.
SCOPE
1.1 This guide covers procedures to be implemented prior to the application of cathodic protection for evaluating the suitability of a tank for upgrading by cathodic protection alone.  
1.2 Three procedures are described and identified as Methods A, B, and C.  
1.2.1 Method A—Noninvasive with primary emphasis on statistical and electrochemical analysis of external site environment corrosion data.  
1.2.2 Method B—Invasive ultrasonic thickness testing with external corrosion evaluation.  
1.2.3 Method C—Invasive permanently recorded visual inspection and evaluation including external corrosion assessment.  
1.3 This guide presents the methodology and the procedures utilizing site and tank specific data for determining a tank’s condition and the suitability for such tanks to be upgraded with cathodic protection.  
1.4 The tank's condition shall be assessed using Method A, B, or C. Prior to assessing the tank, a preliminary site survey shall be performed pursuant to Section 8 and the tank shall be tightness tested pursuant to 5.2 to establish that the tank is not leaking.  
1.5 While this guide provides minimum procedures for assessing a tank's condition, this guide does not provide minimum installation procedures or requirements for upgrades of the tank by cathodic protection.  
1.6 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    10 pages
    English language
    sale 15% off
ASTM
ASTM D1998-21(Specification)
Standard Specification for Polyethylene Upright Storage Tanks

ABSTRACT
This specification covers flat-bottom, upright, cylindrical tanks molded in one-piece seamless construction by rotational molding. The tanks are molded from polyethylene for above ground, vertical installation and are capable of containing aggressive chemicals at atmospheric pressure. This specification does not cover the design of vessels intended for use at pressures other than atmospheric pressure. Furthermore, this specification does not cover the design of portable tanks and is not for vessels intended for use with liquids heated above their flash points in continuous service. Special design considerations not covered in this specification shall be given to vessels subject to superimposed mechanical forces, such as seismic forces, wind load or agitation; to vessels subject to service above specified temperature; and vessels subject to specified superimposed pressure of water. Low-temperature impact test shall be performed on rotational-molded polyethylene tanks. The test method is used on tanks molded from both the crosslinked and non-crosslinked polyethylenes. Dart drop impact test shall be performed to determine the quality of the tank. O-xylene-insoluble fraction or gel test shall be performed on crosslinked polyethylene. Visual inspection and water test shall also be performed on the samples.
SCOPE
1.1 This specification covers flat-bottom, upright, cylindrical tanks molded in one-piece seamless construction by rotational molding. The tanks are molded from polyethylene for above ground, vertical installation and are capable of containing aggressive chemicals at atmospheric pressure. Included are requirements for materials, properties, design, construction, dimensions, tolerances, workmanship and appearance. Tank capacities are from 1900 L (500 gal) up.  
1.2 This specification covers the design of stationery vessels for use at atmospheric pressure intended for use with liquids heated below their flash points and continuous service temperatures below 66°C (150°F) for Type I tanks and below 60°C (140°F) for Type II tanks.  
1.2.1 NFPA Standards 30 and NFPA 31 shall be consulted for installations that are subject to the requirements of these standards.  
1.3 For service requirements beyond the scope of this specification (1.2), such as externally imposed mechanical forces, internal pressure or vacuum, higher temperature service, etc., other relevant sources of standards, for example, local and state building codes, NFPA, ASME, ARM, etc., shall be consulted.  
1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.  
Note 1: ISO 13341:2005+A1:2011 and ISO 13575:2012 are similar, but not equivalent to this standard.  
1.5 The following precautionary caveat pertains only to the test methods portion, Section 11, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    8 pages
    English language
    sale 15% off
  • Technical specification
    8 pages
    English language
    sale 15% off