ASTM F1665-08
(Specification)Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
ABSTRACT
This specification covers poly(vinyl chloride)(PVC) and other conforming organic polymer-coated steel barbed wire consisting of two polymer-coated strands, with four-point barbs of zinc-coated steel or aluminum alloy wire used with chain-link fence. PVC and other organic polymer coatings hereinafter will be designated as polymer coating. Barbed wire strand wire, produced from three classes of wire coatings, is covered as follows: class 1 - polymer coating extruded over zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire; class 2a - polymer coating extruded and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire; and class 2b - polymer coating fused and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire. Polymer-coated steel barbed wire is supplied in a choice of two types as follows: type I - standard, and type II - high security. Breaking strength of the stranded barbed wire shall be tested to meet the requirements prescribed. Adhesion test, accelerated aging test, and color test shall be made to meet the requirements prescribed.
SCOPE
1.1 This specification covers PVC and other conforming organic polymer-coated steel barbed wire consisting of two polymer-coated strands, with four-point barbs of zinc-coated steel or aluminum alloy wire. PVC and other organic polymer coatings hereinafter will be designated as polymer coating.
1.2 Barbed wire strand wire, produced from three classes of wire coatings, is covered as follows:
1.2.1 Class 1, consisting of a polymer coating extruded over zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire;
1.2.2 Class 2a, consisting of a polymer coating extruded and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire; and
1.2.3 Class 2b, consisting of a polymer coating fused and adhered to zinc-coated or aluminum-coated or zinc-5 % aluminum-mischmetal alloy-coated steel wire.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
General Information
Relations
Buy Standard
Standards Content (Sample)
NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation:F1665 −08
StandardSpecification for
Poly(Vinyl Chloride) (PVC) and Other Conforming Organic
Polymer-Coated Steel Barbed Wire Used With Chain-Link
1
Fence
This standard is issued under the fixed designation F1665; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope D1499 Practice for Filtered Open-Flame Carbon-Arc Expo-
sures of Plastics
1.1 This specification covers PVC and other conforming
F552 Terminology Relating to Chain Link Fencing
organic polymer-coated steel barbed wire consisting of two
F934 Specification for Colors for Polymer-Coated Chain
polymer-coated strands, with four-point barbs of zinc-coated
Link Fence Materials
steel or aluminum alloy wire. PVC and other organic polymer
G152 Practice for Operating Open Flame Carbon Arc Light
coatings hereinafter will be designated as polymer coating.
Apparatus for Exposure of Nonmetallic Materials
1.2 Barbed wire strand wire, produced from three classes of
G153 Practice for Operating Enclosed Carbon Arc Light
wire coatings, is covered as follows:
Apparatus for Exposure of Nonmetallic Materials
1.2.1 Class 1, consisting of a polymer coating extruded over 3
2.2 Federal Standard:
zinc-coated or aluminum-coated or zinc-5 % aluminum-
Fed. Std. No. 123 Marking for Shipments (Civil Agencies)
mischmetal alloy-coated steel wire; 3
2.3 Military Standards:
1.2.2 Class 2a, consisting of a polymer coating extruded
MIL-STD-129 Marking for Shipment and Storage
and adhered to zinc-coated or aluminum-coated or zinc-5 %
MIL-STD-163 Steel Mill Products, Preparation for Ship-
aluminum-mischmetal alloy-coated steel wire; and
ment and Storage
1.2.3 Class 2b, consisting of a polymer coating fused and
adhered to zinc-coated or aluminum-coated or zinc-5 %
3. Terminology
aluminum-mischmetal alloy-coated steel wire.
3.1 Definitions—For definitions of terms such as fabric
1.3 The values stated in inch-pound units are to be regarded
(chain-link fence), PVC, and polymer coating, see Terminol-
as the standard. The values given in parentheses are for
ogy F552.
information only.
4. Classification
2. Referenced Documents
4.1 Polymer-coated steel barbed wire is supplied in a choice
2
2.1 ASTM Standards:
of two types as follows:
A90/A90M Test Method for Weight [Mass] of Coating on
4.1.1 Type I (Standard), with barbs spaced on 5-in. (127-
Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
mm) centers; and
A370 Test Methods and Definitions for Mechanical Testing
4.1.2 Type II (High Security), with barbs spaced on 3-in.
of Steel Products
(76-mm) centers.
A428/A428M Test Method for Weight [Mass] of Coating on
Aluminum-Coated Iron or Steel Articles 5. Ordering Information
A700 Practices for Packaging, Marking, and Loading Meth-
5.1 Orders for barbed wire purchased in accordance with
ods for Steel Products for Shipment
this specification shall include the following information:
5.1.1 Quantity (expressed in number of spools);
1
This specification is under the jurisdiction ofASTM Committee F14 on Fences 5.1.2 Length of spools (1320 or 1000 ft (402 or 305 m); see
and is the direct responsibility of Subcommittee F14.40 on Chain Link Fence and
9.4);
Wire Accessories.
5.1.3 Class of a polymer coating to be applied to metallic-
Current edition approved Feb. 1, 2008. Published February 2008. Originally
coated steel strand wire;
approved in 1995. Last previous edition approved in 2001 as F1665 – 01. DOI:
10.1520/F1665-08.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or
3
contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Available from Standardization Documents Order Desk, DODSSP, Bldg. 4,
Standards volume information, refer to the standard’s Document Summary page on Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://
the ASTM website. www.dodssp.daps.mil.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1
---------------------- Page: 1 ----------------------
F1665−08
5.1.4 Color of coating; 7.3 Class 2b polymer-coated wire shall have the coating
5.1.5 Typeofbarbs(galvanizedsteeloraluminumalloy;see fused and adhered to the strand wire that conforms to the
6.3); requirements as given in Table 1.
5.1.6 Type of barbed wire (Type I or II; see 4.1.1 and 4.1.2);
5.1.7 Selectionoftypeofmetalliccoatingonthesteelstrand
8. Size and Construction
wire substrate, which shall be the choice of the producer unless
8.1 All barbed wire furnished in accordance with this
otherwise specified;
specification shall be fabricated from two strands of 14 gage,
5.1.8 Packaging re
...
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:F 1665–01 Designation: F 1665 – 08
Standard Specification for
Poly(Vinyl Chloride) (PVC) and Other Conforming Organic
Polymer-Coated Steel Barbed Wire Used With Chain-Link
1
Fence
This standard is issued under the fixed designation F 1665; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (e) indicates an editorial change since the last revision or reapproval.
1. Scope
1.1 This specification covers poly(vinyl chloride) PVC and other conforming organic polymer-coated steel barbed wire
consisting of two polymer-coated strands, with four-point barbs of zinc-coated steel or aluminum alloy wire. Poly(vinyl
chloride)PVC and other organic polymer coatings hereinafter will be designated as polymer coating.
1.2 Barbed wire strand wire, produced from three classes of wire coatings, is covered as follows:
1.2.1 Class 1, consisting of a polymer coating extruded over zinc-coated or aluminum-coated or zinc-5 % aluminum-
mischmetal alloy-coated steel wire;
1.2.2 Class 2a, consisting of a polymer coating extruded and adhered to zinc-coated or aluminum-coated or zinc-5 %
aluminum-mischmetal alloy-coated steel wire; and
1.2.3 Class 2b, consisting of a polymer coating fused and adhered to zinc-coated or aluminum-coated or zinc-5 %
aluminum-mischmetal alloy-coated steel wire.
1.3 The values stated in inch-pound units are to be regarded as the standard.The values given in parentheses are for information
only.
2. Referenced Documents
2
2.1 ASTM Standards:
A 90/A 90M Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A 370 Test Methods and Definitions for Mechanical Testing of Steel Products
A 428/A 428M Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A 700 Practices for Packaging, Marking, and Loading Methods for Steel Products for Domestic Shipment
D 1499Practice for Operating Light- and Water-Exposure Apparatus (Carbon-Arc Type) for Exposure of Plastics Practice for
Filtered Open-Flame Carbon-Arc Exposures of Plastics
F 552 Terminology Relating to Chain Link Fencing
F 934 Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
G23Practice for Operating Light-ExposureApparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic
Materials 152 Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G26Practice for Operating Light-ExposureApparatus (Xenon-Arc Type) With and Without Water for Exposure of Nonmetallic
6
Materials 153 Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
3
2.2 Federal Standard:
Fed. Std. No. 123 Marking for Shipments (Civil Agencies)
3
2.3 Military Standards:
MIL-STD-129 Marking for Shipment and Storage
MIL-STD-163 Steel Mill Products, Preparation for Shipment and Storage
1
This specification is under the jurisdiction of ASTM Committee F14 on Fences and is the direct responsibility of Subcommittee F14.40 on Chain Link Fence and Wire
Accessories.
Current edition approved Jan. 10, 2001. Published April 2001. Originally published as F1665–95. Last previous edition F1665–95.
Current edition approved Feb. 1, 2008. Published February 2008. Originally approved in 1995. Last previous edition approved in 2001 as F 1665 – 01.
2
For referencedASTM standards, visit theASTM website, www.astm.org, or contactASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
, Vol 01.06.volume information, refer to the standard’s Document Summary page on the ASTM website.
3
Annual Book of ASTM Standards, Vol 01.03.
3
Available from Standardization Documents Order Desk, DODSSP, Bldg. 4, Section D, 700 Robbins Ave., Philadelphia, PA 19111-5098, http://www.dodssp.daps.mil.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
---------------------- Page: 1 ----------------------
F 1665 – 08
3. Terminology
3.1 DefinitionsDefinitions—For—For definitions of terms such as fabric (chain-link fence), PVC, and polymer coating, see
Terminology F 552.
4. Classification
4.1 Polymer-coated steel barbed wire is supplied in a choice of two types as follows:
4.1.1 Type I (Standard), with barbs spaced on 5-in. (127-mm) centers; and
4.1.2 Type II (High Security), with barbs spaced on 3-in. (76-mm) centers.
5. Ordering Information
5.1 Orde
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.