Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

ABSTRACT
This specification covers annealed titanium and titanium alloy strip, sheet, and plate. The grades of titanium and titanium alloy metal covered by this specification shall have the chemical composition requirements of: nitrogen, carbon, hydrogen, iron, oxygen, aluminum, vanadium, tin, ruthenium, palladium, cobalt, molybdenum, chromium, nickel, niobium, zirconium, silicon, and titanium. For sheet and strip, the bend test specimen shall stand being bent cold through without fracture in the outside of the bent portion. Product analysis tolerances cover variations between laboratories in the measurement of chemical content of the specimen. In cutting samples for analysis, the operation should be carried out insofar as possible in a dust-free atmosphere because utmost care must be used in sampling titanium for chemical analysis due to its great affinity for elements such as oxygen, nitrogen, and hydrogen. The chemical analysis shall be conducted by the standard techniques normally utilized by the manufacturer and purchaser.
SCOPE
1.1 This specification covers annealed titanium and titanium alloy strip, sheet, and plate as follows:
1.1.1 Grade 1—Unalloyed titanium,
1.1.2 Grade 2—Unalloyed titanium,
1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS),
1.1.3 Grade 3—Unalloyed titanium,
1.1.4 Grade 4—Unalloyed titanium,
1.1.5 Grade 5—Titanium alloy (6 % aluminum, 4 % vanadium),
1.1.6 Grade 6—Titanium alloy (5 % aluminum, 2.5 % tin),
1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.7.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS),
1.1.8 Grade 9—Titanium alloy (3.0 % aluminum, 2.5 % vanadium),
1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.10 Grade 12—Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.11 Grade 13—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.12 Grade 14—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.13 Grade 15—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.14.1 Grade 16H—Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi minimum UTS),
1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.16 Grade 18—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium,
1.1.17 Grade 19—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1.18 Grade 20—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 % to 0.08 % palladium,  
1.1.19 Grade 21—Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),
1.1.20 Grade 23—Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI),
1.1.21 Grade 24—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,
1.1.22 Grade 25—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium,
1.1.23 Grade 26—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.23.1 Grade 26H—Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),
1.1.24 Grade 27—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.25 Grade 28—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,
1.1.26 Grade 29—Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI) plus 0.08 to 0.14 % ruthenium,
1.1.27 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.28 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.29 Grade 32—Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
1.1.30 Grade 33—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.02 5 % ruthenium, 0.15 % chromium),  
1.1.31 Grade 34—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),
...

General Information

Status
Historical
Publication Date
31-Jul-2008
Current Stage
Ref Project

Relations

Buy Standard

Technical specification
ASTM B265-08a - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview
Technical specification
REDLINE ASTM B265-08a - Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
English language
10 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: B 265 – 08a
Standard Specification for
1
Titanium and Titanium Alloy Strip, Sheet, and Plate
This standard is issued under the fixed designation B 265; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope 1.1.17 Grade 19—Titanium alloy (3 % aluminum, 8 %
2
vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1 This specification covers annealed titanium and tita-
1.1.18 Grade 20—Titanium alloy (3 % aluminum, 8 %
nium alloy strip, sheet, and plate as follows:
vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum)
1.1.1 Grade 1—Unalloyed titanium,
plus 0.04 % to 0.08 % palladium,
1.1.2 Grade 2—Unalloyed titanium,
1.1.19 Grade 21—Titanium alloy (15 % molybdenum, 3 %
1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58
aluminum, 2.7 % niobium, 0.25 % silicon),
ksi minimum UTS),
1.1.20 Grade 23—Titanium alloy (6 % aluminum, 4 %
1.1.3 Grade 3—Unalloyed titanium,
vanadium with extra low interstitial elements, ELI),
1.1.4 Grade 4—Unalloyed titanium,
1.1.21 Grade 24—Titanium alloy (6 % aluminum, 4 %
1.1.5 Grade 5—Titanium alloy (6 % aluminum, 4 % vana-
vanadium) plus 0.04 % to 0.08 % palladium,
dium),
1.1.22 Grade 25—Titanium alloy (6 % aluminum, 4 %
1.1.6 Grade 6—Titanium alloy (5 % aluminum, 2.5 % tin),
vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 %
1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.25 %
palladium,
palladium,
1.1.23 Grade 26—Unalloyed titanium plus 0.08 to 0.14 %
1.1.7.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.25 %
ruthenium,
palladium (Grade 7 with 58 ksi minimum UTS),
1.1.23.1 Grade 26H—Unalloyed titanium plus 0.08 to
1.1.8 Grade 9—Titanium alloy (3.0 % aluminum, 2.5 %
0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),
vanadium),
1.1.24 Grade 27—Unalloyed titanium plus 0.08 to 0.14 %
1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.25 %
ruthenium,
palladium,
1.1.25 Grade 28—Titanium alloy (3 % aluminum, 2.5 %
1.1.10 Grade 12—Titanium alloy (0.3 % molybdenum,
vanadium) plus 0.08 to 0.14 % ruthenium,
0.8 % nickel),
1.1.26 Grade 29—Titanium alloy (6 % aluminum, 4 %
1.1.11 Grade 13—Titanium alloy (0.5 % nickel, 0.05 %
vanadiumwithextralowinterstitialelements,ELI)plus0.08to
ruthenium),
0.14 % ruthenium,
1.1.12 Grade 14—Titanium alloy (0.5 % nickel, 0.05 %
1.1.27 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 %
ruthenium),
palladium),
1.1.13 Grade 15—Titanium alloy (0.5 % nickel, 0.05 %
1.1.28 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 %
ruthenium),
palladium),
1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.08 %
1.1.29 Grade 32—Titanium alloy (5 % aluminum, 1 % tin,
palladium,
1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
1.1.14.1 Grade 16H—Unalloyed titanium plus 0.04 to
1.1.30 Grade 33—Titanium alloy (0.4 % nickel, 0.015 %
0.08 % palladium (Grade 16 with 58 ksi minimum UTS),
palladium, 0.02 5 % ruthenium, 0.15 % chromium),
1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.08 %
1.1.31 Grade 34—Titanium alloy (0.4 % nickel, 0.015 %
palladium,
palladium, 0.025 % ruthenium, 0.15 % chromium),
1.1.16 Grade 18—Titanium alloy (3 % aluminum, 2.5 %
1.1.32 Grade 35—Titanium alloy (4.5 % aluminum, 2 %
vanadium) plus 0.04 to 0.08 % palladium,
molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),
1.1.33 Grade 36—Titanium alloy (45 % niobium),
1
This specification is under the jurisdiction of ASTM Committee B10 on
1.1.34 Grade 37—Titanium alloy (1.5 % aluminum), and
Reactive and Refractory Metals and Alloys and is the direct responsibility of
1.1.35 Grade 38—Titanium alloy (4 % aluminum, 2.5 %
Subcommittee B10.01 on Titanium.
Current edition approved Aug. 1, 2008. Published August 2008. Originally vanadium, 1.5 % iron).
approved in 1952. Last previous edition approved in 2008 as B 265 – 08.
2
NOTE 1—H grade material is identical to the corresponding numeric
For ASME Boiler and Pressure Vessel Code applications see related Specifi-
grade (that is, Grade 2H = Grade 2) except for the higher guaranteed
cations SB-265 in Section II of that Code.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B 265 – 08a
minimum UTS, and may always be certified as meeting the requirements
5. Chemical Composition
of its corresponding numeric grade. Grades 2H, 7H, 16H, and 26H are
5.1 The grades of titanium and titanium alloy metal covered
intended primarily for pressure vessel use.
bythisspecificationshallconformtothechemicalcomposition
TheHgradeswereaddedinresponsetoauserassociationrequ
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation:B265–08 Designation: B 265 – 08a
Standard Specification for
1
Titanium and Titanium Alloy Strip, Sheet, and Plate
This standard is issued under the fixed designation B 265; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the Department of Defense.
1. Scope
2
1.1 This specification covers annealed titanium and titanium alloy strip, sheet, and plate as follows:
1.1.1 Grade 1—Unalloyed titanium,
1.1.2 Grade 2—Unalloyed titanium,
1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS),
1.1.3 Grade 3—Unalloyed titanium,
1.1.4 Grade 4—Unalloyed titanium,
1.1.5 Grade 5—Titanium alloy (6 % aluminum, 4 % vanadium),
1.1.6 Grade 6—Titanium alloy (5 % aluminum, 2.5 % tin),
1.1.7 Grade 7—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.7.1 Grade 7H—Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi minimum UTS),
1.1.8 Grade 9—Titanium alloy (3.0 % aluminum, 2.5 % vanadium),
1.1.9 Grade 11—Unalloyed titanium plus 0.12 to 0.25 % palladium,
1.1.10 Grade 12—Titanium alloy (0.3 % molybdenum, 0.8 % nickel),
1.1.11 Grade 13—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.12 Grade 14—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.13 Grade 15—Titanium alloy (0.5 % nickel, 0.05 % ruthenium),
1.1.14 Grade 16—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.14.1 Grade 16H—Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi minimum UTS),
1.1.15 Grade 17—Unalloyed titanium plus 0.04 to 0.08 % palladium,
1.1.16 Grade 18—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium.,
1.1.17 Grade 19—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum),
1.1.18 Grade 20—Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus
0.04 % to 0.08 % palladium,
1.1.19 Grade 21—Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon),
1.1.20 Grade 23—Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI),
1.1.21 Grade 24—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium,
1.1.22 Grade 25—Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium,
1.1.23 Grade 26—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.23.1 Grade 26H—Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi minimum UTS),
1.1.24 Grade 27—Unalloyed titanium plus 0.08 to 0.14 % ruthenium,
1.1.25 Grade 28—Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium,
1.1.26 Grade 29—Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI) plus 0.08 to 0.14 %
ruthenium,
1.1.27 Grade 30—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.28 Grade 31—Titanium alloy (0.3 % cobalt, 0.05 % palladium),
1.1.29 Grade 32—Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum),
1.1.30 Grade 33—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.02 5 % ruthenium, 0.15 % chromium),
1.1.31 Grade 34—Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium),
1.1.32 Grade 35—Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon),
1
This specification is under the jurisdiction of ASTM Committee B10 on Reactive and Refractory Metals and Alloys and is the direct responsibility of Subcommittee
B10.01 on Titanium.
Current edition approved May 15,Aug. 1, 2008. Published JuneAugust 2008. Originally approved in 1952. Last previous edition approved in 20072008 as B 265 – 078.
2
For ASME Boiler and Pressure Vessel Code applications see related Specifications SB-265 in Section II of that Code.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1

---------------------- Page: 1 ----------------------
B 265 – 08a
1.1.33 Grade 36—Titanium alloy (45 % niobium),
1.1.34 Grade 37—Titanium alloy (1.5 % aluminum), and
1.1.35 Grade 38—Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron).
NOTE 1—H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum
UTS, and may always be certified as meeting
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.